Car Jacks

Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for use with Model No's. 500TTJ and 800TTJ. Features & Benefits: • A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for use with Model No's. 500TTJ and 800TTJ. • Model No. ADT5 Specifications: Model No ADT5 Brand: Sealey Capacity: 1000kg Compatibility: 500TTJ and 800TTJ. Nett Weight: 23.69kg

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 1+A1 Contents: 1 x Load Sling Wide, 3m x 50mm, 1 Tonne

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000. Features & Benefits: • Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each/800kg per Pair. • Model No. CAR2001 Specifications: Model No CAR2001 Brand: Sealey Capacity Each: 400kg Capacity Pair: 800kg Length: 630mm Maximum Width: 195mm Nett Weight: 6.16kg

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Yellow Lifting Sling has the following specifications: Max. Load: 3 Tonne.Width: 90mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 3000kg• Breaking Strength: 3000kg

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.

Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms. Supplied with two short lengths of chain.

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 4m x 120mm, 4 Tonne

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 5 metre

The Sealey JKIT01 Lifting Kit features a Jack, Axle Stands, Creeper, Chocks & Wrench The Sealey JKIT01 offers a 5 piece lifting kit for the DIY mechanic consisting of Jack, Axle Stands, Creeper, Chocks & Wrench. Suitable for working on vehicles up to 2 tonne in weight.  Features:  
- Folding wheel chocks (x2) 
- L-bar wrench with 17 & 19mm socket  
- 1 tonne axle stands (x2) have a combined weight capacity of 2 tonne 
- 2 tonne trolley jack with short wheel base has a lifting range of 140mm to 340mm 
- Padded car creeper with 6 castors allows for comfort whilst carrying out under car maintenance  Specification: 
- Model No: JKIT01 
- Jack Specification:
- Weight: 8.7kg  …