Car Jacks

High-density plastic with anti-slip steel bar. Prevents a maximum 30tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. Steel chock bracket designe more→d to mount to wall or trailer. Features & Benefits: • High-density plastic with anti-slip steel bar. • Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Steel chock bracket designed to mount to wall or trailer. • Chock Dimensions (H x L x W): 225 x 475 x 200mm. • Chock Weight: 1.7kg. • Bracket Weight: 1.36kg. • Model No. CV127 Specifications: Model No CV127 Brand: Sealey Dimensions (W x D x H): 200 x 475 x 225mm Materi…

• Durable 2.1kg rubber wheel chocks (1.05kg each).• Prevents car, caravan or light aircraft moving when jacking or parked on an incline.• Supplied on sturdy 550mm rope for easy storage and removal fro more→m underneath wheels.• Not intended for use on sloped ground over 10°.Durable 2.1kg rubber wheel chocks (1.05kg each). Prevents car, caravan or light aircraft moving when jacking or parked on an incline. Supplied on sturdy 550mm rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°.• Durable 2.1kg rubber wheel chocks (1.05kg each). • Prevents car, caravan or light aircraft moving when jacking or parked on an incline. • Not intended for u…

• Features width adjustment from 180-255mm, making it suitable for almost all motorbikes. • Design ensures rim and tyre protection at all times.• Allows easy removal and cleaning of front wheel.• Plea more→se note all front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No. RPS2KD).• Delivered in knock-down form to reduce freight costs, some self-assembly required.Technical SpecificationNett Weight: 3.5kgMinimum/Maximum Width: 180-255mmTechnical Specification:Minimum Width: 180mm Maximum Width: 255mmDimensions: Length: 110mm x Height: 110mmWeight: 4.1KgWarranty: 1 year

• Optional fork cradle support for front paddock stands.• Designed to cradle and lift the front forks of a motorcycle for cleaning and storage.• Yellow phosphate finish for added corrosion resistance. more→• For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.• Optional fork cradle support for front paddock stands. • …

• Compact automotive wheel chocks for use during emergency wheel change.• To be used on a flat surface only.• Fold flat for easy storage in glove box or door pocket.Compact automotive wheel chocks for more→use during emergency wheel change. To be used on a flat surface only. Fold flat for easy storage in glove box or door pocket.• Compact automotive wheel chocks for use during emergency wheel change. • To be used on a flat surface only. • Fold flat for easy storage in glove box or door pocket. • Folded (W x D x H): 83 x 167 x 28mm (x2). Open: 83 x 167 x 133mm (x2). • Model No. WCF01Technical Specification:Applications: Suitable for cars only, below 2tonne, only on level surface, service purposesDimensio…

• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes.• Once in place, access to all mechanical components at the front of the bike is made easy.• Stand folds dow more→n for compact storage when not in use.Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. Once in place, access to all mechanical components at the front of the bike is made easy. Stand folds down for compact storage when not in use. Supplied with width and angle adjustable rubber support pads to quickly and easily use as rear support stand.• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. • Once in place, access to…

• Farm jack mount for use on 4x4 external spare wheel mount.• Designed for transporting farm jacks when going off-road.• Adjustable base makes it suitable for most vehicles with an externally mounted more→spare wheel.Farm jack mount for use on 4x4 external spare wheel mount. Designed for transporting farm jacks when going off-road. Adjustable base makes it suitable for most vehicles with an externally mounted spare wheel.• Farm jack mount for use on 4x4 external spare wheel mount. • Designed for transporting farm jacks when going off-road. • Adjustable base makes it suitable for most vehicles with an externally mounted spare wheel. • Minimum/Maximum Depth: 120/175mm. • Model No. FJWMBTechnical Specification:Ne…

Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody. Slot in the support block allows the car to be lifted by the sill. Manufactured from zinc pla more→ted steel and rubber, providing a sturdy and durable point of contact. Suitable for use with Sealey Viking 2 & 3 Tonne Jacking Beams. Used in conjunction with Model No's SJBEX.A06 or SJBEX.A07 Jacking Beam Extensions.Features & Benefits:• Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody.• Slot in the support block allows the car to be lifted by the sill.• Manufactured from zinc plated steel and rubber, providing a sturdy and durable point …

Use in conjunction with Model No. RE91/05 Pull Ram. The kit contains 2 x 2m chains each with one hook and two heavy-duty pull clamps. Features & Benefits: • Use in conjunction with Model No. RE91/05 more→Pull Ram. • The kit contains 2 x 2m chains each with one hook and two heavy-duty pull clamps. • Model No. RE91/5/CK Specifications: Model No RE91/5/CK Brand: Sealey Nett Weight: 12.60kg

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Op more→tional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit more→edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and more→as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lo more→west specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the com…

• Handles and levels heavy, off-centre loads quickly and easily.• Ball-bearing handle allows for a smooth and easy adjustment.• Three adjustment holes accommodate different sized engines.• Ideal for c more→ar, van, truck and marine engines.• If used with cranes of capacity 680kg or more, the load must be restricted to 680kg maximum.• Supplied with 4 x 275mm chains and 4 x 'L' shaped brackets with additional karabiner styled screw links.Handles and levels heavy, off-centre loads quickly and easily. Ball-bearing handle allows for a smooth and easy adjustment. Three adjustment holes accommodate different sized engines. Ideal for car, van, truck and marine engines. Suitable for use with all cranes on pa…

• Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted.• Features width adjustment from 300 to 375mm, making it suitable for most types of motorcycle.• Desi more→gn ensures rim and tyre protection at all times.• Once the bike is supported, allows easy removal and cleaning of rear wheel.• Please note: For full floating movement, use in conjunction with FPS1MD.Technical SpecificationNett Weight: 5.7kg

• Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted.• Features width adjustment from 185 to 265mm, making it suitable for most types of motorcycle. • Des more→ign ensures rim and tyre protection at all times.• Once the bike is supported, allows easy removal and cleaning of front wheel.• Please note: All front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No's RPS2 or, for full floating movement, use RPS2MD).Technical SpecificationNett Weight: 6.4kg

• Rubber saddle pad.

Single-piece hydraulic unit with heavy chassis design and large jacking saddle (Pad available as optional extra - Model No. JP17). Universal joint release mechanism allows safer, more controlled lower more→ing of the jack. Twin piston Super Rocket Lift feature brings lifting arm straight into contact with the jacking point. Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Supplied with Pin Type Axle Stands, 3 Tonne (3000kg) capacity per stand, 6 Tonne (6000kg) per pair. Min./Max. Working Height: 290/435mm.…

• Package Includes:• 3000CXD - Trolley Jack 3tonne Standard Chassis• AS3 - Axle Stands (Pair) 3tonne Capacity per Stand - White• You may also refer to the individual Model No. for full specification.P more→ackage Includes:3000CXD - 3tonne Trolley JackAS3 - Axle Stands (Pair) 3tonne Capacity per Stand - WhiteTechnical Specification:Trolley Jack: 3000CXDLength: 659mmMinimum Saddle Height: 130mmMaximum Saddle Height: 520mmMaximum Chassis Height: 172mmAxles Stands (Pair): AS3 - 3tonneWeight: 44.57KgWarranty: 1 year

Rubber Saddle Pad.

• LOW ENTRY LIFTING RANGE - Minimum saddle height 85mm, maximum saddle height 385mm.• PROFILED LIFTING ARM - Allows low clearance height making this unit suitable for sports and custom cars.• ONE PIEC more→E HYDRAULIC UNIT - Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension.• WHITE SADDLE - Aids positioning under vehicle and safety valve prevents overloading.• HEAVY DUTY CHASSIS - Has strengthening flanges along the top edge for extra torsional rigidity under load.Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85…

• Super economy model delivered in knock-down form for reduced freight cost.• Fast folding model provides easy storage and transportation.• Heavy-duty castors.• Weighs only 75kg and is perfect for mob more→ile or workshop use.• Side pump access with removable handle.Super economy model delivered in knock-down form for reduced freight cost. Fast folding model provides easy storage and transportation with heavy-duty castors. Weighs only 75kg and is perfect for mobile or workshop use. Side pump access with removable handle.• Lifts 1000kg at 830mm jib extension. • Fast folding design. • Heavy-duty castors. • Weighs only 75kg. • Side pump access with removable handle. • Delivered in knock-down form. • …