Car Jacks

• Steel construction car ramp extensions to decrease ascent angle.• Ideal for cars with low ground clearance.• Attaches to standard car ramps with a minimum width of 195mm.• Suitable for use with Model No. CAR2000.Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000.• Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each…

• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…

Bottle jack, with hydraulic unit, max. load 2 t. Supplied = assembled. Max. load = 2 t. Lifting range with lifting head = 158 - 298 mm. Lift = 90 mm. Weight = 2.2 kg. Piston diameter = 23 mm. Base plate length = 95 mm. Base plate width = 93 mm. Additional height when unwound = 50 mm. Overall height from - to = 158 - 298 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also …

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 3 metre

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody. Slot in the support block allows the car to be lifted by the sill. Manufactured from zinc plated steel and rubber, providing a sturdy and durable point of contact. Suitable for use with Sealey Viking 2 & 3 Tonne Jacking Beams. Used in conjunction with Model No's SJBEX.A06 or SJBEX.A07 Jacking Beam Extensions.Features & Benefits:• Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody.• Slot in the support block allows the car to be lifted by the sill.• Manufactured from zinc plated steel and rubber, providing a sturdy and durable point …

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 23.8mm. Size ø108mm. Fits saddle ø106-108mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 23.8mm. • Size: ø108mm. • Fits saddle ø106-108mm. • Model No. JP10Technical Specification:Nett Weight: 0.16kgJack Pad Size: ø108mmStyle: Type CProfile Depth: 23.8mmTo Fit Saddle Size: ø106-108mmWeight: 0.16kgDimensions: Length: 15mm x Height: 190mmWeight: 0.172KgWarranty: Consumable

Scissor Jack / Max Load 1.5 t / 2.5 kg

Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle. Made from an EVA material which is oil resistant. Suitable for all jack handles with 30mm diameter.