Effects Pedals

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Colour: Black
Material: Aluminium
Made in: Vietnam
Size: L
Variant: Large

Approved 9V DC/670mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Current: 501-700 mA
Number of Outputs: 1
Polarity: Center Minus
Plug Type: Barrel
Power Supply: 240V
UK/EU Power supply included: No
ChargerType: Power Supply
Current (mA): 700.0
Made in: China
Voltage: 9V

Kicking the ULTRA VIBRATO UV300 into action is like putting an invisible, automatic whammy bar on your guitar. From the gentle, pulsing rhythms of the ocean surf, to the wild, whirling effects of a rotating speaker system, the UV300 will bring a dose of days-gone- by to your sound. Select from Unlatch, Bypass or Latch modes and twist the dedicated Rise, Rate and Depth dials to create your ideal vibrato. In Latch mode, the effect is constantly on once you step on it. Unlatch mode only applies the effect while you press down on the pedal, so you can add vibrato to a single note if you like. Your guitar will be playing mind-games with everyone in earshot as familiar, but hardly ordinary, tones …

Distortion effect pedal for electric guitar that pushes distortion to the extreme by producing crushing, bottom-heavy distortion for modern metal and hard rock. It features gain boost circuitry that delivers super-thick and heavy distortion with low-end punch and endless sustain, dedicated Gain Boost, Distortion, Tone, Bottom and Level controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and first-class electronic on/off switch for highest signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Made in: China
Type: Boost;Distortion<…

3-mode octaver effect pedal for electric bass guitar that allows for creating a monster sound by adding 2 additional tones using the guitar—1 and 2 octaves below the original tone. Pedal provides dedicated volume controls for all 3 tone types for awesome sound shaping, a flexible 3-mode Range switch that allows ultimate bass performance, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Made in: China
Power Supply: Adapter
Type: Octaver
Battery Operation: Ye&hellip;

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Power Supply: Adapter
UK/EU Power supply included: No
Type: Chorus
Made in: China
Battery Operation: Yes

Double pedal booster for 3 effects designed for lifting pedals to the optimum level that can easy to switch between effect pedals located on Pedaltrain pedalboards. This pedal booster has a solid steel frame and can be installed on a pedalboard using velcro or screws, which are accessories.
Zip: Yes
Type: Pedalboard
Original Colour by Producer: Black;Black
Variant: PB3
Colour: Black
Made in: China

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

Overdrive effect pedal for guitars that features original 4558 op amps and MA150 distortion diodes, and delivers the classic, authentic vintage vacuum tube-like sound. It provides dedicated Drive, Tone and Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Made in: China
Type: Overdrive
Battery Operation: Yes

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Type: Dust Cover
Made in: United Kingdom
Compatible with: Boss 500 Series

The Decksaver Strymon Nightsky and Volante Cover is a high-quality cover designed to accommodate your electric guitar pedals protecting your equipment while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include the pedal.…

The Behringer UM300 stakes a claim for being the most versatile distortion pedal on the market. The EQ shaping options are a step above most similar units with a sweepable mid boost/cut which allows you to flick back and forth between old school mid-scooped metal tones and much fatter doomier mid-heavy sounds. This is complemented by the astonishing amount of gain this pedal can dish out. Id wager the Ultra Metal has more gain than any player needs but feel free to put this to the test. Always better to have too much than not enough!

Compression/sustain effect pedal for guitar that compress loud and boost low signals without degrading the original sound. Effect provides dedicated Level, Tone, Attack and Sustain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Operation: Yes
Type: Sustainer;Compressor
Made in: China
UK/EU Power supply included: No
Power Supply: Adapter

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Type: Power Supply
Made in: China
Polarity: Center Minus
Plug Type: Barrel
Voltage: 9V
Current (mA): 1300.0

A chromatic pedal tuner. It offers 7 different tuning modes including normal, flat, double flat and chromatic mode. The tuning progress is displayed via a single-digit LED display and an 11-point stream meter. Two additional directional LEDs indicate the required tuning direction. In addition, the tuner is equipped with one ¼'' input, one ¼'' output and a Bypass output. Powered by a 9V battery or a 9V adapter (not included).
Made in: China
UK/EU Power supply included: No

The Truetone 1 Spot 9V Guitar Pedal Power Supply EU presents a source for all your music. A power cable you can always rely on the durable design is perfect for a gig environment. Able to withstand any on-stage antics that can sometimes occur youll be able to perform with confidence as your pedals remain on for the duration of your gig.Compact robust and reliable. This power supply securely attaches onto your pedal with 3m length so you can put your pedals exactly where you want them. At an affordable price you can ensure your gig goes smoothly - gear you can trust.

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Type: Dust Cover
Compatible with: Headrush Mx5
Made in: United Kingdom

Custom moulded in the UK to fit the contours of the Boss 200 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 200 Series.
Compatible with: Boss 200 Series
Type: Dust Cover
Made in: United Kingdom

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Voltage: 12V
Made in: China
Polarity: Center Minus
Current (mA): 1000.0
UK/EU Power supply included: No
Plug Type: Barrel
Current: 701-1000 mA
Number of Outputs: 1
Power Supply: 240V
ChargerType: Power Supply

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Made in: Vietnam
Original Colour by Producer: Black;Black
Handle: Yes
Waterproof: Yes
Padding: Yes
Colour: Black
Strap: Yes;Shoulder Strap
Type: Pedal Bag

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Battery Operation: No
Colour: Black
Type: Footswitch
Power Supply: Passive
Number of Buttons: 3

The Behringer FCV100 V2 Volume and Modulation Pedal is a powerful two-in-one pedal that controls all the dynamics of your playing. Use your foot to alter the volume giving you hands-free control over your level. It also functions as an expression pedal when connected to devices with correct input. With adjustable minimum volume the level of expressiveness is totally up to you; regardless of how you use it though the VCA control ensures reliability and remarkably smooth performance. Expressiveness made easy tailor your dynamics with ease while keeping your hands free.

Mix and match up to 4 TC-Helicon vocal effect pedals together conveniently, simply and with less cable clutter than ever before with this essential audio and power accessory kit-ideal for VoiceTone Singles. With the included 12-volt power supply and DC interconnect cables, there are many different options for connecting your TC-Helicon effects. The power supply in the Singles Connect kit is more than powerful enough to power one of our large multi-FX units and a VoiceTone Single pedal at the same time.
Made in: China
~ Length: 0 m
Colour: Black