Effects Pedals

The Behringer TO800 Vintage Tube Overdrive pedal is a faithful recreation of that classic green overdrive. The inclusion of the defining 4558 op-amp chip is a nice nod to the original design along with the familiar 3-knob layout which both looks sleek and is remarkably easy to use. With these controls you can adjust the level of the effect adjust the tone and set how much gain youd prefer. This allows you to sculpt your tone however you see fit from a light boost to thick resonant overdrive. Whatever crunchy tone youre after the TO800 will deliver.

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Type: Power Supply
Polarity: Center Minus
Made in: China
Current (mA): 1300.0
Voltage: 9V
Plug Type: Barrel

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

Durable single piano-style footswitch pedal with natural feeling that is compatible with Yamaha, Roland, Kawai and Akai products. Its metal body is covered with thick black urethane bumper, and the long-frame design large rubberized footprint and substantial weight prevents sliding on most surfaces. 1.8 m long cable with 6.3 mm mono phone plug is included. Black and white colour combination.
Compatible with: Kawai;Akai;Roland;Yamaha
Original Colour by Producer: Black;Black
Type-A Connector: Jack MONO 6,3 mm Male
Type: Sustain Pedal
Colour: Black
Polarity Switch: No
Made in: China

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Size: L
Made in: Vietnam
Material: Aluminium
Variant: Large
Colour: Black

The power supply 1 SPOT you can use anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either. the 1 SPOT is one of the quietest power sources. It is the 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.
Power Supply: Adapter;9V
Plug Type: Barrel
Made in: China
Colour: Black
Connector Angle: Straight
Polarity: Center Minus
Voltage: 9V
Current: 1700 mA
Type: Adapter
Variant: 1 SPOT
Current (mA): 1700.0
ChargerType: Power Supply…

A distortion effect pedal. It has dense, tube-like distortion sound with an endless sustain. Its ideal for extreme hard rock or heavy metal sounds. The sound is adjusted using Distortion, Level potentiometers and a 3-band equalizer. In addition, it is equipped with a blue status LED, foot switch and ¼'' In/Out connectors. The effect is powered by a 9 V battery or adapter (not included).
Type: Distortion;Overdrive
Made in: China
Battery Operation: Yes
UK/EU Power supply included: No

The Behringer CS400 Compression and Sustain Ultimate Dynamics effects pedal is the perfect option for balancing your level. Ensuring that your quieter strikes ring with resonance while simultaneously reducing harsh loud tones. With intuitive controls for Level Tone Attack and Sustain you can fully personalise this stompbox tone to maximise its full potential. Utilising an active status LED you will always be able to tell when this pedal is enhancing your dynamics.

The Korg PS1 Single Momentary Footswitch is a rugged sustain pedal for use with Korg keyboards. It has a solid metal construction with non-slip rubber pads giving it a sturdy and solid feel. This easy-to-use universal pedal can be used for sustain when connected to Korg keyboards. The Korg PS1 Single Momentary Footswitch can also be used for the assignable footswitch jack on Korg products. The metal construction with two non-slip rubber pads make the Korg PS1 Single Momentary Footswitch feel solid and reliable.

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
UK/EU Power supply included: No
Current (mA): 1000.0
Power Supply: 240V
Made in: China
Plug Type: Barrel
Polarity: Center Minus
Current: 701-1000 mA
Number of Outputs: 1
Voltage: 12V
ChargerType: Power Supply

Custom moulded in the UK to fit the contours of the Strymon Nightsky & Volante. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Strymon Nightsky & Volante.
Compatible with: Strymon Nightsky / Volante
Made in: United Kingdom
Type: Dust Cover

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Original Colour by Producer: Black;Black
Made in: Vietnam
Strap: Shoulder Strap;Yes
Waterproof: Yes
Type: Pedal Bag
Colour: Black
Padding: Yes
Handle: Yes

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Compatible with: Headrush Mx5
Type: Dust Cover
Made in: United Kingdom

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Battery Operation: No
Colour: Black
Power Supply: Passive
Type: Footswitch
Number of Buttons: 3

The Behringer TU300 Chromatic Tuner is a necessity for any modern performer. Keeping your instrument at the correct tuning is essential to any performer and this makes that job a whole lot easier. Featuring a seven-segment LED indicator you can select between seven different tuning modes and an eleven-point stream meter can ensure the utmost precision at any moment. Whether you are on stage or in the studio this is the perfect companion for you.

The TC Helicon Singles Connect Kit is a cable set for connecting up to four vocal effects pedals together. With minimal cable clutter and simple usage the Singles Connect Kit is an essential audio and power accessory kit for the VoiceTone Single pedals. Including a 12V/1A power supply DC interconnect/daisy-chaining cables and three short XLR cables the Singles Connect Kit opens up a wide range of options for connecting your effects.

The JHS Pedals Red Remote External Switch is an expansion unit for use in conjunction with other JHD effects pedals. The Red Remote allows you to remotely activate the on-board toggle functions on the pedal itself. You can connect the remote with a standard 1/4 instrument cable expanding your tonal options and added an extra layer of versatility to your performance.

The Casio SP-3 Sustain Pedal is a non-latching replacement pedal thats compatible with most Casio keyboards and pianos as well as models with the correct pedal input. It features a grip top and base to prevent slipping during performance. Its lightweight design allows it to be easily transported in a bag or case- perfect for gigging musicians!

Get louder, get quieter, or get modulated with the outstanding FOOT CONTROLLER FCV100. This versatile pedal works equally well as a volume or modulation pedal – without tying up your hands or slowing down your performance.The FCV100 can accommodate two mono or one stereo instrument via its dual 1,4" Input jacks. By switching into Norm mode, the FCV100 is capable of controlling the volume of two individual instruments. In CV mode the FCV100 can control modulation and volume levels of other musical instruments by connecting Output 2 to the volume or modulation input of the instrument. In CV mode, when Output 2 is in use, Input/Output 1 can still be used for controlling the volume of another …

A case style gig bag, ideally suited for the Pedal Baby 100. This tough vinyl gig bag is zippered on three sides and comes with a shoulder strap. There’s a separate space for pedals and cables along with a zipped pocket on top so you can fit your entire rig in a case smaller than a laptop bag. Padding has been added to the inside to provide extra support for your valuable gear.
Original Colour by Producer: Black;Black
Made in: United Kingdom
Type: Soft Case
Colour: Black

The Behringer ADI21 V-Tone Acoustic Preamp is designed to be used with guitars featuring piezo pickups and delivers a natural acoustic sound full of life. The acoustic preamp adds a richness to your overall acoustic performance and features an active direct injection box with proprietary mic emulation circuitry. A full three-band EQ and sweepable mids offer full tonal control whilst the blend control allows guitarists to mix their sound to reach their desired tones. The ADI21 is powered by a 9-volt battery or PSU-SB DC power supply (sold separately). If youre looking for a budget pedal which will vastly improve you live acoustic sound then look no further.

This well-built, real-feel pedal comes with a non-slip rubber plate — essential when performing on hardwood or slip-prone surfaces — and an extended cable (2.2 m) for stacked multi-keyboard setups. It is compatible with half-damper capable keyboards, and it can also serve as a standard pedal switch (for sustain, etc).
Original Colour by Producer: Black;Black
Polarity Switch: No
Cable Length: 2,2 m
Type: Sustain Pedal;Half Damper
Type-A Connector: TRS 6,3 mm Jack
Compatible with: Universal
Colour: Black
Made in: Malaysia

Digital multi-effects pedal comparable to state-of-the-art studio processors that features 24-bit/40 kHz high-resolution stereo effects including Chorus, Flanger, Phaser, Delay, Tremolo and Pitch Shifter. It also provides dedicated Level control plus 2 additional parameter controls for adjustment of delay time, flanger rate etc., a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Made in: China
Power Supply: 9V DC ( - )
UK/EU Power supply included: No
Battery …