Car Jacks

• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…

• Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap.• Manufactured from 100% high strength polyester with reinforced lifting eyes.• Colour-coded according to European standards for identifying capacity.• Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration).Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded accordin…

For repairs and maintenance. Suitable for most standard cars. Platform height 200mm; platform width 205mm approx. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

• 78-510mm lifting range • Single piston pump for a fast lift, reaching full height in just 2.5 strokes • Low profile design • Integrated rubber saddle pad prevents damage to underside of vehicle • EVA foam handle prevents panel damage • Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors • Safety valve prevents the jack from overloadingThis trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrat…

• Replacement hydraulic ram for PH30 engine crane.Replacement hydraulic ram for PH30 engine crane.• Replacement hydraulic ram for PH30 engine crane. • Model No. PH30.01Technical Specification:Nett Weight: 14.7kgRam Capacity: 1200kgRam Diameter: 38.05mmRam Travel: 494mmPump Type: Single SpeedRam Pin Hole Diameter: 22.2mmClevis Pin Hole Diameter: 21.4mmMounting Point Distance (Min): 650mmOverall Length (Min): 690mmBase mount Type: Double ClevisDimensions: Length: 180mm x Height: 140mmWeight: 15.8KgWarranty: Consumable

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth of 19mm. Size ø148mm. Fits saddle ø128-131mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: ø148mm. • Fits saddle ø128-131mm. • Model No. JP04Technical Specification:Nett Weight: 0.29kgJack Pad Size: ø148mmStyle: Type AProfile Depth: 19mmTo Fit Saddle Size: ø128-131mmWeight: 0.29kgDimensions: Length: 20mm x Height: 280mmWeight: 0.3KgWarranty: Consumable

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 1 metre

Sealey FCR500 Steel Folding Loading Ramps 500kg Capacity Per Pair The Sealey FCR500 are Steel Folding Loading Ramps with a capacity of 500kg per pair. The loading ramps are manufactured from strong, durable powder-coated steel, providing safe and easy ramp access for in-line and multi-axle vehicles. These loading ramps are suitable for loading/unloading motorbikes, quads, ride-on lawnmowers and mini tractors from vans or trailers Features:
- Folding design allows compact storage when not in use
- Manufactured from strong, durable powder-coated steel
- Features a strap and hook to help secure ramps while in use
- Provides safe and easy ramp access for in-line and multi-axle vehicles …