Car Jacks

• Min./Max. Height: 300/410mm.• Maximum Capacity: 150kg.• Powder coated pressed steel frame, to ensure strength and durability.• Ideal for use with off-road/trials bikes to easily lift the bike when needing to perform maintenance/servicing or cleaning.• Simple, one foot, step and lift mechanism means the bike can be instantly raised in one motion.• For added safety, features an ‘over centre’ locking toggle linkage to mechanically lock the lift at full height to prevent accidental lowering.• Also fitted with hydraulic dampener for controlled descent.Powder coated pressed steel frame, to ensure strength and durability. Ideal for use with off-road/trials bikes to easily lift the bike when needing …

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

• Quickly and safely lifts and stabilises front or back of a motorcycle with a traditional style double cradle frame design that has no engine, transmission or exhaust protrusions.• Features height adjustment and soft PVC sheath for protection to underside of bike.• Design of stand allows easy wheel maintenance and removal of front or rear wheel.• Minimum/Maximum Height: 200/275mm.• Unit Capacity of 200kg.Quickly and safely lifts and stabilises front or back of a motorcycle with a traditional style double cradle frame design that has no engine, transmission or exhaust protrusions. Features height adjustment and soft PVC sheath for protection to underside of bike. Design of stand allows easy wheel…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 3 metre

• Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles.• Enables easy movement around workshop or bodyshop.• Crutch supports adjustable for height and overall width.• Fitted with four ø90mm locking metal castors.Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. Enables easy movement around workshop or bodyshop. Crutch supports adjustable for height and overall width. Fitted with four ø90mm locking metal castors.• Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. • Enables easy movement around workshop or bodyshop. • Crutch supports adjustable for height and overall wi…

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• Compact automotive wheel chocks for use during emergency wheel change.• To be used on a flat surface only.• Fold flat for easy storage in glove box or door pocket.Compact automotive wheel chocks for use during emergency wheel change. To be used on a flat surface only. Fold flat for easy storage in glove box or door pocket.• Compact automotive wheel chocks for use during emergency wheel change. • To be used on a flat surface only. • Fold flat for easy storage in glove box or door pocket. • Folded (W x D x H): 83 x 167 x 28mm (x2). Open: 83 x 167 x 133mm (x2). • Model No. WCF01Technical Specification:Applications: Suitable for cars only, below 2tonne, only on level surface, service purposesDimensio…

• Enables commercial sized wheels and tyres to be removed/installed on hub studs.• Fork Centres: 535mm.• Length: 1255mm.Enables commercial sized wheels and tyres to be removed/installed on hub studs.• For commercial sized wheel and tyre removal/installation. • Fork Centres: 535mm. • Length: 1255mm. • Model No. TH002Technical Specification:Capacity: 127kgNett Weight: 7.45kgWheel Diameter: Fork Centres; 535mmDimensions: Length: 620mm x Height: 60mmWeight: 7.93KgWarranty: 1 year

Bottle jack, with hydraulic unit, max. load 15 t. Supplied = assembled. Max. load = 15 t. Lifting range with lifting head = 225 - 425 mm. Lift = 140 mm. Weight = 7.7 kg. Piston diameter = 48 mm. Base plate length = 135 mm. Base plate width = 142 mm. Additional height when unwound = 60 mm. Overall height from - to = 225 - 425 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …