United Kingdom

Car Jacks

 prices on 1110 models  
Show
• Replacement hydraulic ram for SSC900 engine crane.Replacement hydraulic ram for SSC900 engine crane.• Replacement hydraulic ram for SSC900 engine crane. • Model No. SSC900.08Technical Specification: more→Nett Weight: 17.5kgRam Capacity: 3000kgRam Diameter: 27.85mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 634mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 17.512KgWarranty: Consumable
• Super economy model delivered in knock-down form for reduced freight cost.• Fast folding model provides easy storage and transportation.• Heavy-duty castors.• Weighs only 75kg and is perfect for mob more→ile or workshop use.• Side pump access with removable handle.Super economy model delivered in knock-down form for reduced freight cost. Fast folding model provides easy storage and transportation with heavy-duty castors. Weighs only 75kg and is perfect for mobile or workshop use. Side pump access with removable handle.• Lifts 1000kg at 830mm jib extension. • Fast folding design. • Heavy-duty castors. • Weighs only 75kg. • Side pump access with removable handle. • Delivered in knock-down form. • …
624.00Buy!
£
MachineMart.co.uk
Delivery: to United Kingdom
Report
The Laser 6531 is a pneumatic jack with extended height of 550mm, and a minimum height of 200mm. This is combined with a lifting weight of 2 tonnes making it the ideal addition for workshops and garag more→es. This model can also be used in conjunction with axle stands and is lightweight and fast as a lift, for added efficiency while working. Completing this jack is a reliable build, and robust design to ensure it gets the job done time and time again.
The Carasafe Ratchet Caravan Jack is good quality and sturdy. It has an integrated ratchet operation for easier lifting and lowering, supplied with the wrench handle. Maximum lifting capacity of 1000k more→g.A caravan jack with integrated ratchet operationWrench handle includedMaximum lift: 1000kgWeight: 2.2kgDimensions: 380 x 95 x 80mmMin / Max height: 100mm / 350mm
Bottle jack, with hydraulic unit, max. load 3 t. Supplied = assembled. Max. load = 3 t. Lifting range with lifting head = 168 - 318 mm. Lift = 100 mm. Weight = 2.3 kg. Piston diameter = 23 mm. Base pl more→ate length = 95 mm. Base plate width = 93 mm. Additional height when unwound = 50 mm. Overall height from - to = 168 - 318 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also …
49.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Note: Image is for illustrative purposes only and may differ from the actual product
148.32Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Heavy-duty chassis fitted with a powerful twin piston 'quick-lift' feature. Large saddle aids positioning integrated rubber saddle pad provides added protection to the vehicle. Available separately i more→s a hardwearing Nylon wheel kit designed to prevent damage to showroom and garage floors. Safety valve prevents the jack from overloading. Supplied with a two piece handle and EVA foam bumper to protect vehicle panels.PTDDRPDIR16407
44.95Buy!
£
Tooled-up.com
Delivery: to United Kingdom
Report
Used for lifting on contoured and round lifting surfaces. Provides more access underneath the vehicle making it easier to work on. Manufactured from Chrome Molybdenum steel, providing a sturdy and dur more→able point of contact. Suitable for use with Sealey Viking 4 Tonne Jacking Beams.Features & Benefits:• Used for lifting on contoured and round lifting surfaces.• Provides more access underneath the vehicle making it easier to work on.• Manufactured from Chrome Molybdenum steel, providing a sturdy and durable point of contact.• Suitable for use with Sealey Viking 4 Tonne Jacking Beams.• Model No. SJBEX.A04Specifications:Model No SJBEX.A04Brand: VikingCapacity: 4 TonneNett Weight: 0.84kg
438.28Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
High lift jack arm with incredibly low access height of just 80mm. Fitted with quick lift foot pedal and dead mans control. Heavy-duty long steel chassis with wide wheelbase provides inherent stabilit more→y and easy-access to deep set jacking points. Fitted with one-piece hydraulic unit with built-in safety overload protection.2 Tonne High Lift Low Profile Trolley Jack• Min./Max. Saddle Height: 80/805mm allowing low entry.• High lift jack arm with incredibly low minimum access height of just 80mm.• Fitted with quick lift foot pedal and dead mans control.• Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy-access to deep set jacking points.• Fitted
• Interlocking plastic dollies can be linked lengthways or sideways to allow the user to create the platform they need to move large or heavy items around the workplace with ease.• Each dolly can hold more→up to 150kg of evenly spread weight.• Injection mould plastic features non-slip pads which prevent load from slipping.• The design of the dolly also allows for these to be stacked safely on top of each other (maximum ten high) when not in use.• They also feature built-in carry handles to aid transportation and 75mm TPR double ball-bearing castors for manoeuvrability.• Overall Size (W x D x H): 605 x 400 x 120mm.Interlocking plastic dollies can be linked lengthways or sideways to allow the user to …
361.93Buy!
£
Demon-tweeks.com
Delivery: in United Kingdom
Report
The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. The more→y roll easily in any direction.Easy entryEasy liftEasy movement2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and
Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength more→polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…
95.98Buy!
£
MachineMart.co.uk
Delivery: to United Kingdom
Report
Strong and durable, with a tough powder coated finish, suitable for trade and garage use for temporarily lifting motor vehicles up to 32 tonnes (32000kg) of weight. The Clarke CBJ32 Strong Arm 32 Tonn more→e Professional Bottle Jack has been fully tested and fitted with an automatic overload valve, to comply with the latest CE directives, whilst the high quality polished steel case ensures a premium finish. Completing this jack is a maximum lift height of 360mm and fold down handle to ensure easier movement when needed. Our full range of High Quality Clarke Strong Arm Professional Bottle Jacks are supplied with a 12-Month Manufacturer's Warranty.
Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one en more→d (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
699.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Trolley Jack 3Ton Note: Image is for illustrative purposes only and may differ from the actual product
1,039.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Info Governance Engine Up To 10 Devices
206.18Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
The CTJ1500QULP is made from heavy duty steel and combines the benefits of an ultra low profile and a quick lift trolley jack. These features are very useful for rapid operation on very low cars makin more→g it ideal for motor sports and mobile operators.- Ultra low profile - 72mm min saddle height - 607mm Max Saddle Height- Foot pedal for quick lift to vehicle contact point - Quick lift to max height in only 8 strokes- Long Reach and High Lift with Non-Marking Wheels- Automatic pressure relief vPTDCLA7623075
• Suitable for lower capacity single and twin cylinder engines.• Supports can rotate for accessibility to all parts of the engine.• Useful integral utility/drip tray.• Capacity: 30kg.Suitable for smal more→l capacity single and twin cylinder engines (maximum weight 30kg) and includes a utility/drip tray. Supports can rotate for accessibility to all parts of the engine.• Suitable for lower capacity single and twin cylinder engines. • Supports can rotate for accessibility to all parts of the engine. • Useful integral utility/drip tray. • Capacity: 30kg. • Model No. MES01Technical Specification:Capacity: 30kgEngine Support Span: 200-370mmHeight: 375mmLength: 535mmNett Weight: 7.89kgWidth: 320mmDimensions: L…
114.99Buy!
£
Jcb-tools.co.uk
Delivery: in United Kingdom
Report
The JCB-TH31501 is a robust, low-profile and double-pump hydraulic trolley jack designed to offer a maximum lifting capacity of up to 1.5 tonnes in weight.Courtesy of its aluminium construction, the J more→CB-TH31501 is capable of lifting cars, light commercial vehicles and other vehicles which require high ground clearance up to 355mm in height.The JCB-TH31501's low-profile design makes it suitable for raising vehicles with low chassis clearance, particularly useful when using the racing jack for track days and other associated motorsport events.Thanks to its integrated double-piston mechanism, the JCB-TH31501 is a quick-lift trolley jack, which will save you precious time and effort in comparison …
• Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.• N.B. Never use brake fluid to top-up a hydraulic unit.Hydraulic oil recommended for use in all jacks (trolley and bot more→tle) and cranes.N.B. Never use brake fluid to top-up a hydraulic unit.• Recommended for use in all jacks (trolley and bottle) and cranes. • Model No. HJO500MLSTechnical Specification:Nett Weight: 0.47kgPack Qty: 1Size: 500mlDimensions: Length: 60mm x Height: 213mmWeight: 0.472KgWarranty: Consumable
789.00Buy!
£
MachineMart.co.uk
Delivery: to United Kingdom
Report
The Sealey 1500TR has been manufactured to exacting standards making it an ideal workshop lifting companion. This model is spring loaded with a dead mans safety release for reduced risk of inadvertent more→lowering and also features a two way hydraulic mechanism to ensure the saddle lowers at a controlled speed at all times. Completing this jack is a reliable build and extra large castors for easy movement around the workshop.
Expert Quality, each fitted with four heavy duty white non-marking castors. Robust steel manufacture enables up to 454kg weight to be carried on each dolly. Designed to locate underneath vehicle wheel more→s allowing precise and easy movement within confined spaces. Carton packed.
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height