Car Jacks

• IDEAL FOR 4x4 VEHICLES - Clever device which quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials.• EASY-TO-USE - Simply remove the existing trolley jack saddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor (30mm spigot pin) and you are ready to lift.• SIZE - Minimum/Maximum Height: 140/230mm.• SUITABLE FOR - Jacks with a 31-33mm saddle spigot pin, including Model No's 3000CXD and 3010CX.*Note: Remove any rubber jack pad from the saddle before using to improve safety.Quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace…

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length o…

• Two composite wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Suitable for cars not exceeding 2 tonne gross weight.Two composite wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for cars not exceeding 2 tonne gross weight.• Two composite wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for cars not exceeding 2tonne gross weight. • Model No. WC09Technical Specification:Dimensions (W x D x H): 80 x 185 x 100mmMaterial: CompositeNett Weight: 0.44kg…

• Lightweight and compact design for easy use in confined conditions.• Features drop-forged and heat treated pinion gear with totally enclosed mechanism.• Hooks fitted with safety latches and rotate 360°.• Free-chaining feature permits slack in the load chain to be taken up by hand before engaging the ratchet arm.Lightweight and very compact design makes this hoist easy-to-use in very confined working conditions. Features drop-forged and heat treated pinion gear with totally enclosed mechanism. Hooks are fitted with safety catches and rotate 360°. Free-chaining feature permits slack in the load chain to be taken up by hand before engaging the ratchet arm. Fitted with high quality durable …

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks.

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

• Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height.• Made in the EU and fitted with safety overload valve.• One-piece steel base, reservoir and pump cylinder design gives added strength.• Supplied with zinc coated handle.Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle.• Min./Max. Height: 145/360mm. • Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. • Made in the EU and fitted with safety ov…

• Approved to EU and UK Lifting Gear Regulations.• This hoist is intended for use where a suitable support facility exists.• Support brackets are included with the equipment.• N.B. Support bar is not included.Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.• Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 250kg. • N.B. Support bar is not included. • Model No. PH250Technical Specification:Capaci…

The Master Lock Carry Strap No. 3126EURDAT features a 2.5m long x 25mm and 5.5m long x 25mm crossed straps with zamac buckles. They are a readymade carrying solution with a strap and an integrated handle.They are ideal to carry cartons or pieces of furniture, the metal cam buckle enables you to adjust the length of the strap. The two handles with foam finish make the use even more comfortable. Colour: Red.Strap Width: 25mm. Additional Information:• Length: 2.5 & 5.5m• Type: Carry Strap• Load Capacity: 80kg