Powerline Adapters

Height - 0.9"
Width - 3.2"
Depth - 2.0"
Input_Ports - 1 x RJ-45 10/100/1000Base-T
Output_Ports - 1 x RJ-45 10/100/1000Base-T

Tired of struggling with Wi-Fi dead zones? The Powerline 600 Mini offers a simple solution for creating a high-speed home network throughout your entire house. This kit includes two adapters that utilize your existing electrical wiring to deliver speeds of up to 600 Mbps. No need for additional cables! Simply plug one adapter into your internet modem using an ethernet port, and then plug the second adapter into any power outlet in your home. This instantly extends your internet connection to that location, allowing you to connect computers, electronics, and other network-compatible devices – all without running new wires!

PoE Splitter TL-POE10R
- IEEE 802.3af compliant
- Selectable power output
- Gigabit speed support
- Plug-and-Play requires no configuration     What This Product Does The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter such as TP-LINK's TL-SF1008P or TL-POE150S or other equivalent product to deliver 12V 9V or 5V Direct Current to where there are no power line or outlet where you wish to fix device such as AP IP Camera or IP Phone etc.  

The Powerline 600 Kit Which Includes 2 Powerline 600 Adapters Creates In An Extremely Simple Way A High-Speed Home Network Using Your Home?S Existing Electrical Wiring At Speeds Up To 600 Mbit/S. No New Wire Required! Connect Computers Consumer Electronics And Network-Compatible Devices To The Internet In Any Room And Any Floor Of Your Home By Simply Using A Power Outlet. You Just Have To Connect One Powerline 600 Adapter To Your Internet Modem Via An Ethernet Port And Your Internet Connection Becomes Immediately Available From Any Power Socket By Using The Second Powerline 600 Adapter In The Room Of Your Choice. No Power Outlet Goes To Waste Because Each Powerline 600 Adapter Is Equipped With …

Ubiquiti Networks POE-24-30W-G-WH 24V Gigabit Ethernet PoE Injector and Adapter.Specifications:Connection:- Ethernet interface type: gigabit ethernet- Ethernet LAN, data transfer rate: 10,100,1000 Mbit/s- Power over Ethernet (PoE): Yes- Certification: CE, FCC, IC, ULPorts and Interfaces:- Ethernet LAN (RJ-45) number of ports: 2Energy control:- Power over Ethernet (PoE): 24V- Output power: 30W- Input voltage: 100 - 240V- input frequency: 50/60hz- Input current: 0.4/0.6A- Suitable for use in country/location: EuropeEnvironmental conditions:- Operating temperature range: 0 - 40°C- Relative Humidity Range for Operation: 35 - 95%- Storage temperature range: -30 - 70°CWeight and measurements:- Broad: 94…

Digitus Din Rail Distribution Box

Support Memory Card : No Support Apt-x : No Support AAC : No Model Number : Essager EB01 USB Bluetooth Adapter Package : Yes Feature : None High Definition Support : None Content : AUDIO WIFI Standard : None Wireless Type : bluetooth Sound Track : Double Interface : 3.5mm,USB Brand Name : ESSAGER Origin : Mainland China Certification : CE Product Name : Essager Bluetooth V5.0 USB Wireless Dongle Adapter Cable Function : 10 Meters Communication Distance Feature 1 : USB Bluetooth Adapter For Wireless Earphone Speaker Feature 2 : Bluetooth Dongle For Car Aux Jack Interface Feature 3 : Bluetooth V5.0 Adapter Receiver Feature 4 : Buletooth USB Adaptador , Wireless Transmitter Receiver Compatibility …

Description: Designed for Nintendo Switch, Nintendo Switch Lite and Nintendo Switch OLED only Cartoon thumb grip caps, lovely design, adds funny and vitality into your Switch or Switch Lite, make it more eye-catching. Made of odorless silicone material, which can protect the analog sticks from scratches and dirt, and it is very comfortable to touch! Protect the analog stick caps from long term corrosion and spalling. And joystick cap firmly hugs the joystick, no need to worry about shaking and not fitting. Easy to Install: 1. Turn over the joystick caps. 2. Put the caps on the joystick and fall the edge of the caps. 3. Check if the thumb grip wrap the joystick completely. 4. Adjust the caps …

High performance data transfer and stable connection between devices. Range up to 20 m. Using devices that are several meters away. High sound quality . Listening to music on wireless headphones without interference. Backward Compatibility . The adapter connects to devices that use older versions of Bluetooth. Easy Plug&Play installation. No driver installation required.

TP-Link TL-POE4824G PoE adapter Gigabit Ethernet 48 V

Mikrotik RBGPOE PoE adapter Gigabit Ethernet 48 V

PoE+ Injector
- 2 Gigabit ports ensure faster transmission
- Complies with IEEE802.3af/at standards supplies up to 30 W
- Reduces infrastructure costs by transmitting data and power simultaneously via an Ethernet cable
- Automatically determines and supplies the exact power to meet the device's need
- Wall-mounting and desktop design accommodates most installation scenarios
- Plug & Play installation requires no configuration
- Integrated power supply



What This Product Does
The PoE+ Injector TL-POE160S fully complies with IEEE 802.3af/at standards and can work with all IEEE 802.3af/at PoE compliant PDs (Powered Devices) …

Digitus Passive PoE Cable Kit, Splitter + Injector

Connect two LC fiber cables or establish fiber connectivity on a keystone patch panelConnect two LC Duplex fiber cables featuring UPC polished ends to extend a network connection using this LC to LC Keystone Coupler. The female to female fiber coupler maintains optimal signal integrity while achieving low insertion loss that exceeds industry standards.Compatible with Single Mode and Multimode Fiber CablesThe LC Fiber Coupler supports Single Mode and Multimode LC/LC fiber cables. It is compatible with OS1/OS2 (9/125m) and OM1/OM2/OM3/OM4/OM5 (62.5/125m and 50/125m) fiber core/cladding. The coupler fits securely into the keystone jack which can be installed in a keystone patch panel or wall plate …

Digitus LC / LC Coupler, Multimode

Equip LC Connector

The equip® Fiber optic keystone adapter, designed to bridge LC Duplex fiber. The snap-in mechanical design makes it work well with both equip patch panels and wall-mounted outlets.Features:- Suitable for equip keystone system- Keystone patch panels, 769224 and 769249- Surface Mounted Box, 125121 and 125122- Keystone box, 125460- Outlets, 760303/761303, 760301/761301, 125471/125474 and 761311/761312- Selling unit: 8pcs/packSpecifications:- Approval and compliance: RoHS- Product weight (kg): 0,0065- Product breadth (mm): 17,8- Product depth (mm): 29- Product height (mm): 16,1