Car Jacks

• Tyre storage/transport dolly ideal for use with up to eight tyres.• Four ø75mm swivel TPR castors, one featuring a brake providing smooth and quiet manoeuvrability around the workplace. • Overall Size (W x D x H): 640 x 640 x 110mm.• The dolly has a capacity of 136kg.Tyre storage/transport dolly ideal for use with up to eight tyres. Four ø75mm swivel TPR castors, one featuring a brake providing smooth and quiet manoeuvrability around the workplace. The dolly has a capacity of 136kg.• Tyre storage/transport dolly ideal for use with up to eight tyres. • Four ø75mm swivel TPR castors, one featuring a brake providing smooth and quiet manoeuvrability around the workplace. • Overall S…

• Two composite wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Suitable for cars not exceeding 2 tonne gross weight.Two composite wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for cars not exceeding 2 tonne gross weight.• Two composite wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for cars not exceeding 2tonne gross weight. • Model No. WC09Technical Specification:Dimensions (W x D x H): 80 x 185 x 100mmMaterial: CompositeNett Weight: 0.44kg…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 8.2mm. Size ø104mm. Fits saddle ø98-105mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 8.2mm. • Size: ø104mm. • Fits saddle ø98-105mm. • Model No. JP15Technical Specification:Nett Weight: 0.074kgJack Pad Size: ø104mmStyle: Type BProfile Depth: 8.2mmTo Fit Saddle Size: ø98-105mmWeight: 0.074kgDimensions: Length: 15mm x Height: 190mmWeight: 0.074KgWarranty: Consumable

For repairs and maintenance. Suitable for most standard cars. Ramp height 200mm; tyre/wheel width 180mm. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

• DESIGNED FOR THE JACKING POINTS - protects and prevents damage to jacking points, side skirts and the underside of the vehicle.• HIGH QUALITY RUBBER - providing a sturdy and durable point of contact.• SECURE FIT TO VEHICLE - moulded to fit bespoke vehicle fitting.Technical SpecificationApplication(s): TTRS MK2 8J (2009-2014), PF3-1660, TT MK2 8J (2007-2014), R8 (2006 - ON), S7 (2012 - 2017), RS7 (2013 - 2017), A7 Quattro (2010 - 2017), A7 (2010 - 2017), A6 / S6/ RS6 C6 (2004-2011), S6 (2012 - 2018), RS6 (2012 - 2018), A6 Quattro (2011 - 2018), A6 (2011 - 2018), Jack Pads, SQ5 (2013 - 2017), Q5 Quattro (2008-2017), Q5 (2008-2017), S5 (2007 - 2016), RS5 (2010 - 2016), A5 Quattro (2007-2016), A5 (2…

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 6 metre

• Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.• N.B. Never use brake fluid to top-up a hydraulic unit.Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.N.B. Never use brake fluid to top-up a hydraulic unit.• Recommended for use in all jacks (trolley and bottle) and cranes. • Model No. HJO5LSTechnical Specification:Nett Weight: 4.17kgPack Qty: 1Size: 5LDimensions: Length: 130mm x Height: 285mmWeight: 4.37KgWarranty: Consumable

• Manufactured from durable polypropylene.• Suitable for professional or serious DIY applications.Manufactured from durable polypropylene. Suitable for professional or serious DIY applications.• 3tonne Capacity per pair. • Manufactured from durable polypropylene. • Suitable for professional or serious DIY applications. • Overall Dimensions (L x W x H): 900 x 300 x 215mm. • Maximum Tyre Width: 260mm. • Model No. CAR3000CTechnical Specification:Capacity Pair: 3000kgMaximum Tyre Width: 260mmNett Weight: 0.00kgOverall Dimensions (L x W x H): 900 x 300 x 215mmRamp Height: 160mmDimensions: Length: 330mm x Height: 315mmWeight: 9.76KgWarranty: 1 year