Effects Pedals

Pedal Design Foot Pedal

Analog bucketbrigade delay effect pedal for guitar with up to 300 ms of delay and optionally separate wet and dry outputs that provides true analog delay experience and vintage vibe of real slapback e more→cho. It features advanced noise reduction circuit that keeps the signal clean, dedicated Intensity, Echo and Repeat Rate controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and firstclass electronic on/off switch that offers noisefree operation. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Detail: Al/Mn
Made in: China
Type: Delay;Echo<…

Pedal Design Foot Pedal

Pedal Design Foot Pedal

Pedal Design Foot Pedal

Bass EQ / Pedal

Overdrive effect pedal that was designed specifically for bass guitars and supports their entire frequency range, including 5and 6string basses, and delivers rich, tubelike distortion, smooth sustain more→and fat tone. Effect provides unique Balance control for mixing the overdriven signal with natural dry bass sound, as well as dedicated Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and topquality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Detail: Al/Mn
Type: Equalizer;Distortion;Overdrive
UK/EU Power supply included: No
Made &hellip;

Pedal Design Foot Pedal

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output more→? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
Type: DI Box
UK/EU Power supply included: No
Made in: Germany

Setting up amps, dialing in tones and positioning mics takes a lot of time and patience. Step on the amazing TUBE AMP MODELER TM300 and skip straight to the good part! The TM300 features authentic mod more→eling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most soughtafter tube amp sounds – from clean to crunch to superfat distortion.
Type: Tube Amp Modeler;Equalizer;Distortion
UK/EU Power supply included: No
Made in: China
Battery Operation: Yes
Power Supply: Adapter

An analog modeling preamplifier and DI box designed for bass. It has a wide range of sound settings, from classic tube to sharp slap and aggressive distortion sound. In addition, it offers direct reco more→rd output, V-TONE to simulate the sound of well-known vintage amplifiers and other audio options. The device can be used as a direct recording preamplifier with speaker simulation or as an active standard DI box. The effect has a built-in 6.3 mm mono jack input and output, a gold plated XLR connector and a ground lift switch. Powered by 9 V battery or DC adapter (not included).
Type: Preamp;DI Box
Battery Detail: Al/Mn
Made in: China
UK/EU Power supply included: No

True bypass guitar distortion effect. Effect is controlled with Level, Voice and Drive controllers and a 3 band EQ. Reproduces the classic sound of the '57 Deluxe amplifier. Powered by 9V battery or D more→C 9 V adapter. Dimensions are 118 x 87 x 38 mm. Weight: 460 g. Product comes in bronze finish.
Type: Distortion
Battery Type: 9V
Power Supply: Adapter or Battery
True Bypass: Yes
Battery Operation: Yes
Made in: China
UK/EU Power supply included: No

Passive footswitch pedal that allows plugging a single guitar into two amplifiers or plugging two guitars into a single amplifier, making it easy and convenient to create a rig with eminent flexibilit more→y and a variety of tone options. “A or B” and “A and B” switching options allow for greater versatility, while true hardwire bypass in the off position lets players retain their natural tone without interference or signal loss. Pedal features a durable metal chassis and switches that withstand onstage wear and tear, and LED illumination (requires 9 V battery or power source). Dimensions: 127 x 83 x 51 mm.
Made in: China
Number of Buttons: 2

Vintage-style phase shifter effect pedal for electric guitar that offers an authentic, classic three dimensional phase shifting - from rapid rotary speaker to impressive jet plane effects. It provides more→dedicated Rate control and separate Color switch for fine-tuning of effects speed and tone, a status LED for effect on/off and battery check and a true hard-wire bypass for ultimate signal integrity. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 142 x 79 x 86 mm. Weight: 380 g.
Type: Rotary;Phaser
UK/EU Power supply included: No
Made in: China

NU-X Sculpture is a mini compressor pedal with professional performance. Sustain and level controls adjust the compression and output, whilst blend gives the ability to add back in some of the unaffec more→ted signal to give a more natural attack. Hold down the on/off pedal to switch between soft clip and clean compression modes. Perfect for long sustain chords and clean lead tones. Features: Adjustable sustain and level Blend control to feed in some natural attack Selectable soft clip and clean modes Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Controls: …

Wah-Wah

NU-X Morning Star is a blues drive pedal with a twist. Along with standard Drive, Level and Tone controls, holding the on/off pedal engages a Shine mode, which boosts the high frequencies adding spark more→le to cut through a mix. Wide ranging gain adjustment offers tones from natural break-up to thick authentic overdrive. Enough range for blues to full-on rock styles. Features: Drive, Tone and Level controls True or buffered bypass operation Switchable Shine treble boost effect Requires 9V centre negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Input impedance: 1M Ohm Output …

Eyemaster Metal Distortion brings back the original metal credo of "loud and brutal" with its "simpler-than thou" 2-knob operation. Just set the volume (all the way up, right?) and adjust the gain (an more→ything less than all-the-gain is sacrilege) and start riffing. Eyemaster was specifically designed to channel the Swedish death metal tone, endearingly nicknamed the "Swedish buzzsaw". As that term implies, Eyemaster is not a subtle overdrive. It is not transparent and it does not "sit well in a mix". Rather, it burns an unholy path straight through the mix. The concept of gain is something we often take for granted but rarely do we stop and think about what the term actually implies. These days,…

EP-2 is a passive vol/expression pedal from Valeton Surge series, it features compact size, no need for extra battries or power adapter, you can easily control your instrument volume or some value of more→your effect with EP-2.While Valeton may not be a household name, the EP-2 is worth a solid look for anyone who’s just wanting a basic volume/expression pedal to get the job done. The unit, as implied by the name, pulls double duty as an expression and volume pedal; two tasks which it performs admirably.
Inputs: Jack 6,3mm TS
Made in: China
Type: Expression;Passive Design;Volume
Controls: Expression Pedal
Outputs: Jack 6,3mm TS
Battery Operation: No
UK/EU Power supply included: No
Colour: Orange<…

Bass guitar headphone amplifier from amPlug 2 series that is designed specifically for low frequencies, offering a wide-range response. It delivers three modes and features a dramatically improved ana more→logue circuit. It also provides a rhythm function, foldable plug mechanism that rotates 180 degrees and an auto power-off function for improved convenience and ease of use. The pre-amplifier is powered by two AAA batteries (up to 11 hours of operation time, 17 with RHYTHM off), and provides a headphone output and an aux input. AAA alkaline batteries are included.
Headphone Output: Yes
Controls: Tone;Rhythm;Volume;Volume/Tempo
MP3 / Line In: Yes
Made in: Japan
Offer Configuration: Standard offer
UK/EU …

Analog True bypass guitar chorus effect. Effect is controlled with Rate and Depth controllers. Features classic BBD chip with circuit-chorus sound . Powered by 9V battery or DC 9 V adapter. Dimensions more→are 118 x 64 x 38 mm. Weight: 380 g. Product comes in blue finish.
Battery Type: 9V
Battery Operation: Yes
Made in: China
Power Supply: Adapter or Battery
UK/EU Power supply included: No

Sound buffer that protects against signal amount and quality loss which happens with large pedalboards with many pedals and with long cables. This buffer compensates for the loss of the signal and can more→work at the beginning or at the end of the effect line and doesn’t need any controls. Thanks to the components being used, the amount of hum is minimum. RockBoard Natural Sound buffer is encased in a durable metal construction, houses In/Out Jack inputs and is powered by a 9V power supply, which is not included.
Battery Operation: No
Power Supply: 9V DC ( - )
Depth (cm): 3.3
Inputs: Mono
Colour: Black
Width (cm): 4.2
Length (cm): 7.4
Outputs: Mono
Type: Buffer
True Bypass: None
UK/EU Power supply in…

Reverb / Pedal Design Foot Pedal / Effects Reverb

Pedal Design Foot Pedal