Car Jacks

The Master Lock Carry Strap No. 3126EURDAT features a 2.5m long x 25mm and 5.5m long x 25mm crossed straps with zamac buckles. They are a readymade carrying solution with a strap and an integrated handle.They are ideal to carry cartons or pieces of furniture, the metal cam buckle enables you to adjust the length of the strap. The two handles with foam finish make the use even more comfortable. Colour: Red.Strap Width: 25mm. Additional Information:• Length: 2.5 & 5.5m• Type: Carry Strap• Load Capacity: 80kg

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 2.5 metre

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 31.4mm. Size 140mm. Fits Saddle 139-140mm.

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, for semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Features & Benefits: • Expert Quality • For semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. • Can also be used for the lifting and transfer of steel beams and as a pulling clamp • Test certificate included Specifications: Depth (Beam Clamp): 64mm Girder Beam Width: 75-260mm Overall Width (Beam Clamp): 180-360mm Safe Working Load (SWL): 1 tonne Steel Plate Thickness: 5mm …

This trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrated rubber saddle pad to prevent damage to the underside of the vehicle when in operation. Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors. There is a safety valve to prevent the jack from overloading. Manufactured to EN1494 Specification Features & Benefits: • 78-510mm lifting range • Single piston pump for a fast lift, …

Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even load support. Heavy gauge steel frame and welded construction give superior strength and safety. Features captive, spring assisted, multi-position pin load support and retracting castors for easy manoeuvrability. Ideal for commercial vehicles. Sold as singles, but MUST be used in pairs, or multiples of.

Ratchet type axle stands with cast iron support posts. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 285/420mm. • Capacity: 6 Tonne per pair. • Ratchet type with cast iron support posts. • Tough steel-plate welded bases. • Sold in pairs. • Model No. VS2003

Expert Quality, enables easy changing or moving of large wheels with deep tread tyres used on tractors or HGVs. Fitted with six adjustable and lockable rollers (3 each side) allowing for easy turning of large wheels. The jacking handle and hydraulic foot pedal enables safe single person operation. Capable of carrying 1500kg wheels and lifting them between 0-770mm. Fitted with four heavy duty castors for improved stability and easy manoeuvrability. Designed for use on agricultural and commercial wheels and tyres. Features & Benefits: • Expert Quality • Enables easy changing or moving of large wheels • Fitted with six adjustable and lockable rollers (3 each side) • Jacking …

• Sturdy yet lightweight wheel chocks weigh around 250g each.• Prevents car, caravan, or light aircraft moving when jacking or parked on an incline.• Supplied on 800mm sturdy rope for easy storage and removal from underneath wheels.• Not intended for use on sloped ground over 10°.Sturdy yet lightweight wheel chocks weigh around 250g each. Prevents car, caravan, or light aircraft moving when jacking or parked on an incline. Supplied on 800mm sturdy rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°.• Sturdy yet lightweight wheel chocks weigh around 250g each. • Prevents car, caravan, or light aircraft moving when jacking or parked on…