Car Jacks

• Adapter suitable for all farm jacks.• For use on Land Rover Defenders with jacking point tube.Adapter suitable for all farm jacks so the jack can be used on Land Rover Defenders with jacking point tubes.Technical Specification:Nett Weight: 1.36kgDimensions: Length: 60mm x Height: 90mmWeight: 1.4KgWarranty: 1 year

Ratchet type axle stands with cast iron support posts. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 285/420mm. • Capacity: 6 Tonne per pair. • Ratchet type with cast iron support posts. • Tough steel-plate welded bases. • Sold in pairs. • Model No. VS2003

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 2 metre

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms.• Supplied with two short lengths of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms. Supplied with two…

BMW trolley jack rubber pad, designed to avert damage to the underside of a BMW when using a trolley jack, thus assisting in the prevention of rust on the underside of the vehicle's chassis. Made from durable and robust rubber. The rectangular locating rubber enables the pad to be secured within the unique BMW jacking port. For use with standard chassis trolley jacks with a saddle diameter of over 70mm.

• MECHANICAL LIFTING - Pedal action mechanical lift meaning there is little maintenance required.• STEEL CHASSIS - Giving a capacity of 560kg per skate.• PVC ROLLERS - Cradle vehicle’s tyre and are capable of handling up to 300mm in tyre width.• NYLON CASTORS - Fitted with 4 ø100mm nylon castor wheel for smooth movement.• NOTE: SOLD AS SINGLES, but MUST be used in pairs.Technical SpecificationCapacity: 560kgCastor Diameter: ø100mmMaximum Opening: 595mmMaximum Tyre Width: 300mmTechnical Specification:Capacity: 560kg Castor Diameter: 100mm Maximum Opening: 595mm Maximum Tyre Width: 300mmDimensions: Length: 650mm x Height: 210mmWeight: 18.2KgWarranty: 1 year

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Powerful – the pneumatic car jack uses 5 to 10 bar compressed air to effortlessly raise vehicles up to 3000 kg with the aid of air cushions
Fast – the air jack for cars reaches its 40 cm maximum lifting height in just 5 s, so you can get to work right away
Safe – a large base and a support with a diameter of 10 cm provides stability to the air cushion car jack, while an overpressure valve protects against excessive loads
Flexible – achieve an optimal position effortlessly thanks to the three-position adjustable handle and two wheels on the pneumatic car jack
Stable – built with steel and featuring three air cushions, the construction is robust and durable, while an adjustable inner cylinder p…

Specifications:Ports & interfaces: - Connector 1 : QD- Connector 2 : 3.5 mm- Connector 1 form factor: Straight- Connector 2 form factor: StraightSustainability- Sustainability certificates: CEPackaging data: - Package width: 135 mm- Package depth: 5 mm- Package height: 200 mm- Package weight: 40 g

• Replacement hydraulic ram for SSC900 engine crane.Replacement hydraulic ram for SSC900 engine crane.• Replacement hydraulic ram for SSC900 engine crane. • Model No. SSC900.08Technical Specification:Nett Weight: 17.5kgRam Capacity: 3000kgRam Diameter: 27.85mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 634mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 17.512KgWarranty: Consumable

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.