Car Jacks

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for vehicles below 5tonne. • Model No. WC02Technical Specification:Applications: Suitable for vehicles below 5tonneDimensions (W x D x H): 115 x 270 x 175mmMaterial: RubberNett Weight: 6.13kgWeight Each: 3.3kgDimensions: Length: 215mm x Heig…

Bottle jack, with hydraulic unit, max. load 20 t. Supplied = assembled. Max. load = 20 t. Lifting range with lifting head = 235 - 440 mm. Lift = 145 mm. Weight = 10 kg. Piston diameter = 48 mm. Base plate length = 153 mm. Base plate width = 162 mm. Additional height when unwound = 60 mm. Overall height from - to = 235 - 440 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …

• Interlocking plastic dollies can be linked lengthways or sideways to allow the user to create the platform they need to move large or heavy items around the workplace with ease.• Each dolly can hold up to 150kg of evenly spread weight.• Injection mould plastic features non-slip pads which prevent load from slipping.• The design of the dolly also allows for these to be stacked safely on top of each other (maximum ten high) when not in use.• They also feature built-in carry handles to aid transportation and 75mm TPR double ball-bearing castors for manoeuvrability.• Overall Size (W x D x H): 605 x 400 x 120mm.Interlocking plastic dollies can be linked lengthways or sideways to allow the user to …

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading.

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 12mm. Size ø136.5mm. Fits saddle ø136.5mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 12mm. • Size: ø136.5mm. • Fits saddle ø136.5mm. • Model No. JP08Technical Specification:Nett Weight: 0.23kgJack Pad Size: ø136.5mmStyle: Type BProfile Depth: 12mmTo Fit Saddle Size: ø136.5mmWeight: 0.23kgDimensions: Length: 20mm x Height: 280mmWeight: 0.246KgWarranty: Consumable

• Manufactured from 3.5mm steel section.• Suitable for professional or serious DIY applications.• Corrosion resistant finish.• Ramps stack together and will stand upright for easy storage.• BS Approved.Manufactured from 3.5mm steel section. Suitable for professional or serious DIY applications. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved.• 2tonne Capacity per pair. • Manufactured from 3.5mm steel section. • Ramps coated with corrosion resistant finish. • Ramps stack together and will stand upright for easy storage. • Maximum Tyre Width: 200mm. • BS Approved. • Model No. CAR2000Technical Specification:Capacity Pair: 2000kgMaximum Tyre Width…