Car Jacks

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 5 metre

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.5mm. Size ø104mm. Fits saddle ø93-95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.5mm. • Size: ø104mm. • Fits saddle ø93-95mm. • Model No. JP09Technical Specification:Nett Weight: 0.05kgJack Pad Size: ø104mmStyle: Type BProfile Depth: 7.5mmTo Fit Saddle Size: ø93-95mmWeight: 0.05kgDimensions: Length: 20mm x Height: 280mmWeight: 0.074KgWarranty: Consumable

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

• Jacking beam lifts load with compressed air.• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.• Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Ja…

• Replacement hydraulic ram for PH30 engine crane.Replacement hydraulic ram for PH30 engine crane.• Replacement hydraulic ram for PH30 engine crane. • Model No. PH30.01Technical Specification:Nett Weight: 14.7kgRam Capacity: 1200kgRam Diameter: 38.05mmRam Travel: 494mmPump Type: Single SpeedRam Pin Hole Diameter: 22.2mmClevis Pin Hole Diameter: 21.4mmMounting Point Distance (Min): 650mmOverall Length (Min): 690mmBase mount Type: Double ClevisDimensions: Length: 180mm x Height: 140mmWeight: 15.8KgWarranty: Consumable

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

Features & Benefits: • Jack Stands ideally suited to the professional trade workshop!• Manufactured from heavy duty steel• Pin type for added safety and strength• Pin wire strap secured to stand to prevent loss• Deep saddle for positive location under vehicle• Adjustable Height• Conforms to international standards CEMaterial: Heavy Duty SteelStandard: CECapacity: 1350kgMinimum Height: 255mmMaximum Height: 370mmLift Height: 110mmSaddle Diameter: 18 x 50 x 62mmBase Area: 195 x 180mm

• LARGE CAPACITY - Made for automotive and light commercial fuel tanks up to a capacity of 40 gallons (tank must be emptied before handling).• VERSATILE - Four adjustable support arms can be easily positioned to fit many shapes and sizes.• PROTECTION - Rubber pads protect the tank while being supported.• SAFE - Includes two load restraint straps.Technical SpecificationCapacity: 565kgCompatibility: ADT3, ADT5, ADT7, 500TTJ, 800TTJNett Weight: 25kgTechnical Specification:Capacity: 565kgDimensions: Length: 440mm x Height: 125mmWeight: 23.48KgWarranty: 1 year

• Replacement hydraulic ram for SPC2000 engine crane.Replacement hydraulic ram for SPC2000 engine crane.• Replacement hydraulic ram for SPC2000 engine crane. • Model No. SPC2000.28Technical Specification:Nett Weight: 17.5kgRam Capacity: 8000kgRam Diameter: 37.89mmRam Travel: 624mmPump Type: Twin SpeedRam Pin Hole Diameter: 22.0mmClevis Pin Hole Diameter: 27.5mm*Mounting Point Distance (Min.): 797mm**Overall Length (Min.): 855mmBase Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centreDimensions: Length: 150mm x Height: 860mmWeight: 18KgWarranty: Consumable