Car Jacks

Heavy-duty chassis with one-piece hydraulic unit. Handle mounted safety release, prevents inadvertent lowering. Includes large diameter saddle for easier positioning under the jacking point. Foot operated quick lift system. Fitted with safety overload valve. Integral tool tray for convenience and wheel nut retention. Rubber jack pad to prevent damage to the underside of the vehicle's jacking point. Features & Benefits: • Min./Max. Saddle Height: 150/600mm. • Heavy-duty chassis with one-piece hydraulic unit. • Handle mounted safety release, prevents inadvertent lowering. • Includes large diameter saddle for easier positioning under the jacking point. • Foot operated quick lift system. • Fitted …

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

• LARGE CAPACITY - Made for automotive and light commercial fuel tanks up to a capacity of 40 gallons (tank must be emptied before handling).• VERSATILE - Four adjustable support arms can be easily positioned to fit many shapes and sizes.• PROTECTION - Rubber pads protect the tank while being supported.• SAFE - Includes two load restraint straps.Technical SpecificationCapacity: 565kgCompatibility: ADT3, ADT5, ADT7, 500TTJ, 800TTJNett Weight: 25kgTechnical Specification:Capacity: 565kgDimensions: Length: 440mm x Height: 125mmWeight: 23.48KgWarranty: 1 year

• Replacement hydraulic ram for SSC900 engine crane.Replacement hydraulic ram for SSC900 engine crane.• Replacement hydraulic ram for SSC900 engine crane. • Model No. SSC900.08Technical Specification:Nett Weight: 17.5kgRam Capacity: 3000kgRam Diameter: 27.85mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 634mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 17.512KgWarranty: Consumable

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 4 metre

• Compact and easy-to-use to raise a vehicle either manually or with an electric drill of 90Nm or more (do not use an impact wrench as this will damage the mechanism).• While raising, the lift can be stopped at any height before locking the vehicle out level.• Once raised, it can be tilted forwards or backwards to allow much greater access to underside of car (always use suitably rated axle stands before getting under a vehicle).• Three adjustable width settings (775mm/1130mm/1530mm) allows narrow chassis cars to be lifted, such as MGs and other small classic cars. • Even with modern wider cars, this style of lift allows easy-access to sills and edges of vehicle that some lifts would obscure.• …

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the com…

Heavy-duty trailer jack with swivel mount used to jack trailer into position. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting. Height adjustment handle for ease of use. Zinc-plated finish helps resist corrosion. Load bearing capacity 900kg.