Car Jacks

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 12mm. Size ø136.5mm. Fits saddle ø136.5mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 12mm. • Size: ø136.5mm. • Fits saddle ø136.5mm. • Model No. JP08Technical Specification:Nett Weight: 0.23kgJack Pad Size: ø136.5mmStyle: Type BProfile Depth: 12mmTo Fit Saddle Size: ø136.5mmWeight: 0.23kgDimensions: Length: 20mm x Height: 280mmWeight: 0.246KgWarranty: Consumable

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 3 tonne x 1 metre

• Replacement hydraulic ram for SC10LR.V2 engine crane.Replacement hydraulic ram for SC10LR.V2 engine crane.• Replacement hydraulic ram for SC10LR.V2 engine crane. • Model No. SC10LR.V2-23Technical Specification:Nett Weight: 13kgRam Capacity: 7257kgRam Diameter: 33.93mmRam Travel: 495mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.7mmMounting Point Distance (Min): 620mmOverall Length (Min): 655mmBase Mount Type: Double ClevisWeight: 13.003KgWarranty: Consumable

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: ø117mm. • Fits saddle ø112-117mm. • Model No. JP18Technical Specification:Nett Weight: 0.235kgJack Pad Size: ø117mmStyle: Type BProfile Depth: 18mmTo Fit Saddle Size: ø112-117mmWeight: 0.235kgDimensions: Length: 25mm x Height: 240mmWeight: 0.256KgWarranty: Consumable

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

• SPACE SAVING - Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall.• 2 AND 3 TONNE - Suitable for Sealey axle stands like the VS2002, VS2003 and AS3 ranges as well as most other brands of axle stands.• HEAVY DUTY FIXINGS - Supplied with fasteners to mount to a wall.• SECURE - Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling.Technical SpecificationNett Weight: 2kg

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

Polished aluminium with steel pocket clip. Designed for pinpoint lubrication to small and awkward areas. 40mm length applicator needle with brass flow control button for fine control. Display packed.