Car Jacks

Bottle jack, with hydraulic unit, max. load 8 t. Supplied = assembled. Max. load = 8 t. Lifting range with lifting head = 200 - 385 mm. Lift = 125 mm. Weight = 5 kg. Overall height from - to = 200 - 3 more→85 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.

B0078 Swivel Castors to Suit ZT1024492X, Pack of 2 by Kennedy

Made primarily for the motor racing enthusiast this jack weighs in at just 26kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bring more→ing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.2.5 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 95/485mm allowing low entry.• Chassis Length: 725mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 26kg. • Utilises many

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead mans handle which also aids controlled lowe more→ring speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See chart for detailed specification.

Precise hand-operated scissor action Fitted with a non-marking ratcheting tie-down strap to secure loads Driven by a 1/2" Sq. Dr. adaptor Four heavy-duty swivel castors for manoeuvrability Capacit more→y 200kg Draper 12 months parts and labour warranty

Ideal for workshop or roadside use, these jacks take the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids control more→led lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See chart below for detailed specification.

Ideal for car and light commercial transmission removal and installation. Features and Benefits Fully adjustable universal rotary saddle with adjustable corner brackets and safety chains, for peace of more→mind Foot operated pump and release valve leaves both hands free to maneuver transmission Wide base with four 3" dia. swivel-type ball bearing castors, providing stability and easy maneuvering Two-stage flash chromed rams inhibit rust from entering the hydraulic system Powerful lifts, from 875 to 1800mm Notes Capacity - 1/2 Tonne Ram Extensions - 2 Minimum Saddle Height - 875mm Maximum Saddle Height - 1800mm Saddle Size - 680x810mm Chain Length - 95mm Saddle Tilt Forward - 24" Saddle Tilt Back …

The TÜV and GS tested HEYNER 347090 Ultra Lift XS Pro is a high-quality ratchet scissor jack - suitable for small cars, small trailers and small cars with a total weight of up to 1.3 tonnes Side skir more→ts height from the car: min. 25 cm | 100% lifting force: 230 - 323 mm | weight: 1.6 kg | material: powder-coated steel Q235 | trolley jack with 17 ratchet (adjustable direction) for comfortable lifting and lowering without clamping your hand Please note: the entire lifting force is reached in a range between 230 and 323 mm. Lifting work under 230 mm creates increased forces on the ball bearing. Lifting is not recommended for safety reasons. ✔️ Regardless of the workshop, simply lift the car to ch…

Machine jack, with hydraulic unit and manual winch, max. load 10 t. Supplied = assembled. Max. load = 10 t. Lifting range with lifting head = 380 - 610 mm. Lifting range with lifting toe = 30 - 190 mm more→. Lift = 160 mm. Max. load with lifting head = 10 t. Max. load with lifting toe = 6 t. Weight = 23 kg. Product type = hydraulic jacks. Lift with head or toe. Lifting head with additional spindle thread, height adjustable to max. 80 mm. Detachable lever. With a max. load on the lifting head of 10 tonnes and 6 tonnes on the lifting toe, this machine jack can be used everywhere in the workshop.

The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. The more→y roll easily in any direction.Easy entryEasy liftEasy movement2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and

Chassis Stand / Max Load 2 t

This Draper 2 tonne Low Profile Trolley Jack gives you a low profile trolley jack with a twin piston 'quick lift' facility that provides extra lift for every pump of the handle. The excellent, low 70m more→m entry height makes this jack particularly suitable for reduced clearance vehicles such as sports cars. A fast lowering two-piece twist handle is fitted with a foam bumper preventing possible panel damage when being pumped. An extra large cushioned saddle is provided for easier location under vehicles.

Pneumatic Jack - 2 Tonne by Zoro Select