Effects Pedals

Pedal Design Foot Pedal

Fuzz/distortion effect pedal for guitars that recreates the gamut of famous fuzz tones from the 60’s and 70’s and offers switch for 3 different sound modes: Fuzz 1 (classic fuzz), Fuzz 2 (grunge) and gain Boost. It provides dedicated Gain, Bass, Treble and Level, controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g..
Power Supply: Adapter
UK/EU Power supply included: No
Type: Fuzz
Made in: China
Battery Operation: Yes

Analog bucket-brigade delay effect pedal for guitar with up to 300 ms of delay and optionally separate wet and dry outputs that provides true analog delay experience and vintage vibe of real slap-back echo. It features advanced noise reduction circuit that keeps the signal clean, dedicated Intensity, Echo and Repeat Rate controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and first-class electronic on/off switch that offers noise-free operation. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Type: Echo;Delay<&hellip;

Overdrive and distortion pedal for electric guitar that combines the overdrive and distortion effects for a wide range of tones, suitable for use with both single-coil and humbucker pickups. It features dedicated Level, Tone, Drive and Mode controls, status LED for effect on/off and battery check, and first-class noiseless electronic on/off switch that maintains excellent signal integrity in bypass mode. Pedal is equipped with 1/4" input and output, and can be powered by 9 V battery or PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: 330 g.
Type: Distortion;Overdrive
Made in: China
UK/EU Power supply included: No

The Behringer CL9 Compressor/Limiter Pedal allows you to balance every aspect of your performance. Ensuring each note rings at a similar volume consistently guaranteeing that quiet notes cut through the mix while louder and harsher notes are dampened to ensure that they arent lost within the performance. This allows you to play with subtle nuance while also having the peace of mind that each aspect of your playing is captured perfectly.

The Behringer NR300 Noise Reduction Pedal is the perfect device for removing pesky hum from your mix caused by your pickups. Protecting your sound it ensures absolute clarity for crisp clean notes all of which have that unwanted background noise that is more synonymous with single-coils removed from its mix. A dedicated combination of threshold and decay controls that let guitarist alter their sound at any time for the perfect performance.

Compact 7-band graphic equalizer pedal with wide frequency range from 50 Hz to 10 kHz for electric bass guitar that provides total shaping control over the tone and eliminates feedback. 7 frequency bands (50, 120, 400, 500, 800 Hz; 4.5, 10 kHz) with a 15 dB of Boost/Cut provide extensive tone-shaping options, while first-class electronic on/off switch ensures noise-free operation. Pedal also features status LED for effect on/off and battery check. It can be powered by 9 V battery or 9 V adapter PSU (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Detail: Al/Mn
Type: Equalizer
Power Supply: Adapter
UK/EU Power supply included: No
Battery Operation: Yes
Made in: China…

Overdrive effect pedal that was designed specifically for bass guitars and supports their entire frequency range, including 5- and 6-string basses, and delivers rich, tube-like distortion, smooth sustain and fat tone. Effect provides unique Balance control for mixing the overdriven signal with natural dry bass sound, as well as dedicated Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Detail: Al/Mn
Type: Overdrive;Equalizer;Distortion
Made in: China
UK/EU Power supply …

Robust 7-band EQ pedal for electric and electric-acoustic guitar that shapes the sound and eliminates unwanted feedback. Pedal offers a wide frequency range – from 100 Hz to 6.4 kHz, with a powerful 15 dB boost or cut of each EQ band. It is equipped with a first-class electronic on/off switch for highest signal integrity n bypass mode, and status LED for on/off and battery check. Powered by 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Battery Operation: Yes
Power Supply: Adapter
UK/EU Power supply included: No
Made in: China
Type: Equalizer

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
UK/EU Power supply included: No
Made in: Germany
Type: DI Box

Setting up amps, dialing in tones and positioning mics takes a lot of time and patience. Step on the amazing TUBE AMP MODELER TM300 and skip straight to the good part! The TM300 features authentic modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most sought-after tube amp sounds – from clean to crunch to super-fat distortion.
Type: Distortion;Tube Amp Modeler;Equalizer
Battery Operation: Yes
Made in: China
UK/EU Power supply included: No
Power Supply: Adapter

True bypass guitar distortion effect. Effect is controlled with Level, Voice and Drive controllers and a 3 band EQ. Reproduces the classic sound of the '57 Deluxe amplifier. Powered by 9V battery or DC 9 V adapter. Dimensions are 118 x 87 x 38 mm. Weight: 460 g. Product comes in bronze finish.
Battery Operation: Yes
Made in: China
UK/EU Power supply included: No
Type: Distortion
Battery Type: 9V
Power Supply: Adapter or Battery
True Bypass: Yes

The Behringer ADI21 V-Tone Acoustic Preamp is designed to be used with guitars featuring piezo pickups and delivers a natural acoustic sound full of life. The acoustic preamp adds a richness to your overall acoustic performance and features an active direct injection box with proprietary mic emulation circuitry. A full three-band EQ and sweepable mids offer full tonal control whilst the blend control allows guitarists to mix their sound to reach their desired tones. The ADI21 is powered by a 9-volt battery or PSU-SB DC power supply (sold separately). If youre looking for a budget pedal which will vastly improve you live acoustic sound then look no further.

An analog modeling preamplifier and DI box designed for bass. It has a wide range of sound settings, from classic tube to sharp slap and aggressive distortion sound. In addition, it offers direct record output, V-TONE to simulate the sound of well-known vintage amplifiers and other audio options. The device can be used as a direct recording preamplifier with speaker simulation or as an active standard DI box. The effect has a built-in 6.3 mm mono jack input and output, a gold plated XLR connector and a ground lift switch. Powered by 9 V battery or DC adapter (not included).
Made in: China
Battery Detail: Al/Mn
UK/EU Power supply included: No
Type: DI Box;Preamp

The Fender ABY Footswitch allows you to achieve new strides in your tone freeing you to connect one guitar into two separate amplifiers or the reverse passing two guitars into one amp. Opening the door to new tonal exploration you can swap your setup at the kick of a switch obtaining the sound from a specific amplifier at any moment. Thanks to the A and B feature you can even run your signal through two amplifiers simultaneously and a sound that powerful can only mean good things for your live shows. But if you wish to put two guitars through one amplifier then you can saving space for long road trips. Your title here...

Express yourself. Like never before. The Electro Harmonix Cntl Knob Static Expression Pedal gives you versatile control of any device with expression control jacks. This is everything you want from an expression pedal at a fraction of the size. Powerful effects. All at the touch of a button. The Cntl Knob lets you set two preset values representing two positions of a traditional expression pedal. With one click you can toggle between them giving you access to a wealth of vastly different sounds. And with a TRS+/- switch on board the Cntl Knob proves highly flexible. This is everything you need to upgrade your rig.

The Behringer VP1 Vintage Phaser Effects Pedal is an authentic 3-dimensional phase shifting pedal which provides you with everything from whirling speakers to impressive jet plane effects. Equipped with dedicated Rate and Tone controls the Behringer VP1 allows you to fine-tune the speed and tone - creating your own unique phasing effect.

Sound buffer that protects against signal amount and quality loss which happens with large pedalboards with many pedals and with long cables. This buffer compensates for the loss of the signal and can work at the beginning or at the end of the effect line and doesn’t need any controls. Thanks to the components being used, the amount of hum is minimum. RockBoard Natural Sound buffer is encased in a durable metal construction, houses In/Out Jack inputs and is powered by a 9V power supply, which is not included.
Battery Operation: No
Type: Buffer
UK/EU Power supply included: No
Made in: China
Depth (cm): 3.3
Inputs: Mono
Outputs: Mono
Length (cm): 7.4
Colour: Black
Width (cm): 4.2
True Bypass: No…

WAH-WAH effect pedal, made of ABS with shielded metal plate base and rubber feet. It can be used as a volume pedal. Dimensions: width: 60 mm height: 86 mm length: 198 mm Power supply: 9V battery, not included. Inputs: jack mono. Outputs: jack mono.
Outputs: Jack 6,3 mm TS
UK/EU Power supply included: No
Battery Operation: Yes
Inputs: Jack 6,3 mm TS
Type: Wah-Wah;Volume
Made in: Italy

Eyemaster Metal Distortion brings back the original metal credo of "loud and brutal" with its "simpler-than thou" 2-knob operation. Just set the volume (all the way up, right?) and adjust the gain (anything less than all-the-gain is sacrilege) and start riffing. Eyemaster was specifically designed to channel the Swedish death metal tone, endearingly nicknamed the "Swedish buzzsaw". As that term implies, Eyemaster is not a subtle overdrive. It is not transparent and it does not "sit well in a mix". Rather, it burns an unholy path straight through the mix. The concept of gain is something we often take for granted but rarely do we stop and think about what the term actually implies. These days,…

NU-X Morning Star is a blues drive pedal with a twist. Along with standard Drive, Level and Tone controls, holding the on/off pedal engages a Shine mode, which boosts the high frequencies adding sparkle to cut through a mix. Wide ranging gain adjustment offers tones from natural break-up to thick authentic overdrive. Enough range for blues to full-on rock styles. Features: Drive, Tone and Level controls True or buffered bypass operation Switchable Shine treble boost effect Requires 9V centre negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Input impedance: 1M Ohm Output …

NU-X Sculpture is a mini compressor pedal with professional performance. Sustain and level controls adjust the compression and output, whilst blend gives the ability to add back in some of the unaffected signal to give a more natural attack. Hold down the on/off pedal to switch between soft clip and clean compression modes. Perfect for long sustain chords and clean lead tones. Features: Adjustable sustain and level Blend control to feed in some natural attack Selectable soft clip and clean modes Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Controls: …

Volume Pedal

Ukiyo-E Mini Classic Chorus PedalUkiyo-E translates from Japanese as "pictures of the floating world", describing the dreamscape-type sounds created by 3 classic chorus pedals that this unit emulates. ST Chorus is modelled on a rock classic stereo chorus pedal, SCH-1 delivers a true-to life emulation of a much-revered classic pedal from Japan and CE-1 is the grand patriarch of all chorus effects, emulating the soft analog tones of the first mass production chorus effect. All 3 are selected by an illuminated push button above the controls. Holding this button down during power-up selects between mono output or stereo output, which requires a stereo jack lead. Controls include Rate, Width and …