Car Jacks

Crane Yankee 1tonne Long Reach Delivered in knock-down form for reduced freight cost. Heavy-duty front and rear castors are on extendable arms to give improved stability, particularly when operating at maximum jib extension of 1930mm. Side pump access with removable handle. Specifications Make: Sealey Model No.: SC10LR Lifting Cap in Position 1: 1000kg Lifting Cap in Position 2: 750kg Lifting Cap in Position 3: 500kg Lifting Cap in Position 4: 250kg Maximum Lift Ht at Minimum Jib Extn: 2000mm Maximum Lift Ht at Maximum Jib Extn: 2500mm Length of Jib Position 1: 1210mm Length of Jib Position 2: 1450mm Length of Jib Position 3: 1690mm Length of Jib Position 4: 1930mm Height of Frame: 190mm …

Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 3 tonne. Features and Benefits • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Suitable for vehicles below 3 tonne. • Model No. WC01 Specifications Model No WC01 Applications: Suitable for vehicles below 3 Tonne Brand: Sealey Dimensions (W x D x H): 100 x 195 x 150mm Material: Rubber Nett Weight: 3.79kg Weight Each: 1.8kg

• Replacement hydraulic ram for SSC900 engine crane.Replacement hydraulic ram for SSC900 engine crane.• Replacement hydraulic ram for SSC900 engine crane. • Model No. SSC900.08Technical Specification:Nett Weight: 17.5kgRam Capacity: 3000kgRam Diameter: 27.85mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 634mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 17.512KgWarranty: Consumable

• Replacement hydraulic ram for SPC2000 engine crane.Replacement hydraulic ram for SPC2000 engine crane.• Replacement hydraulic ram for SPC2000 engine crane. • Model No. SPC2000.28Technical Specification:Nett Weight: 17.5kgRam Capacity: 8000kgRam Diameter: 37.89mmRam Travel: 624mmPump Type: Twin SpeedRam Pin Hole Diameter: 22.0mmClevis Pin Hole Diameter: 27.5mm*Mounting Point Distance (Min.): 797mm**Overall Length (Min.): 855mmBase Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centreDimensions: Length: 150mm x Height: 860mmWeight: 18KgWarranty: Consumable

• Replacement hydraulic ram for SC10.V3 engine crane.Replacement hydraulic ram for SC10.V3 engine crane.• Replacement hydraulic ram for SC10.V3 engine crane. • Model No. SC10.V3-ETechnical Specification:Nett Weight: 9.6kgRam Capacity: 3000kgRam Diameter: 27.88mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 635mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 9.612KgWarranty: Consumable

• Replacement hydraulic ram for SC10LR.V3 engine crane.Technical SpecificationNett Weight: 11kgRam Capacity: 7257kgRam Diameter: 30mmRam Travel: 480mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min): 650mmOverall Length (Min): 665mmBase mount Type: Double ClevisTechnical Specification:Capacity: 7257kg Diameter: 30mmDimensions: Length: 710mm x Height: 150mmWeight: 9.99KgWarranty: 1 year

Ratchet type axle stands with cast iron support posts. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features and Benefits • Min./Max. Working Height: 285/420mm. • Capacity: 6 Tonne per pair. • Ratchet type with cast iron support posts. • Tough steel-plate welded bases. • Sold in pairs. • Model No. VS2003 Specifications Model No VS2003 Brand: Sealey Capacity Each: 3tonne Capacity Pair: 6tonne Maximum Working Height: 420mm Minimum Working Height: 285mm Nett Weight: 6.40kg

Ratchet type axle stands with cast iron support posts and tough steel plate welded base. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features and Benefits • Min./Max. Working Height: 275/415mm. • Capacity: 4 Tonne per pair. • Ratchet type with cast iron support posts. • Tough steel plate welded bases. • Sold in pairs. • Model No. VS2002 Specifications Model No VS2002 Brand: Sealey Capacity Each: 2 Tonne Capacity Pair: 4 Tonne Maximum Working Height: 415mm Minimum Working Height: 275mm Nett Weight: 5.1kg

Heavy-duty axle stands to safely support vehicles for extended periods of time. Large crutch for even load distribution. Heavy gauge steel frame and base plate with welded construction gives superior strength and safety. Supplied with captive, multi-position pin load support. Sold in pairs. Features and Benefits • Min./Max. Working Height: 332/485mm. • Capacity: 40 Tonne per pair. • Heavy-duty high lift axle stands. • Sturdy welded steel construction. • Captive pin load support. • Ideal for use with 20 Tonne air jacks. • Sold in pairs. • 3 Year Guarantee*. • Model No. AS20 Specifications Model No AS20 Brand: Premier Capacity Each: 20 Tonne Capacity Pair: 40 Tonne Maximum Working Height: 48…

All steel construction. Four swivel locking castors. 'I' beam cross member for added strength. Ideal for maintenance, manufacturing, repairs and other material-handling tasks. Quick assembly and disassembly for easy transport within a workplace or from site to site. This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery. Features and Benefits • Package includes: • Model No. - Description • SG1000 - 1 Tonne Portable Adjustable Gantry Crane • PT1000 - 1 Tonne Plain Trolley • CB1000 - 1 Tonne Chain Block 2.5m Drop • This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery. • Model No. SG1000KIT Specification…

Made primarily for the motor racing enthusiast, this jack weighs in at just 26kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons, bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up. Features and Benefits • Min./Max. Saddle Height: 95/480mm, allowing low entry. • Chassis Length: 710mm. • Made primarily for the motor racing enthusiast, this jack weighs in at just 26kg. • Utilises many weight saving techniques such as skeletal lift arm…

Made primarily for the motor racing enthusiast, this jack weighs in at just 17.6kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons, bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up. Features and Benefits • Min./Max. Saddle Height: 85/425mm, allowing low entry. • Chassis Length: 637mm. • Made primarily for the motor racing enthusiast, this jack weighs in at just 17.6kg. • Utilises many weight saving techniques such as skeletal…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features and Benefits • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capac…

Weight-for-weight, this strap is three to five times stronger than chains and has the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features and Benefits • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features and Benefits • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capac…

Attaches to the existing pronged saddle, fitted to our TR, ETJ and TRQ model transmission jacks. This plate will assist in working on fuel tanks, sub frames, transmissions and many other tasks. The chemical resistant rubber pad protects the point of contact. Supplied with four eyelets to fasten down the load onto the plate. Powder Painted to create a durable and rust resistant finish. Features and Benefits • Attaches to the existing pronged saddle, fitted to our TR, ETJ and TRQ model transmission jacks. • This plate will assist in working on fuel tanks, sub frames, transmissions and many other tasks. • The chemical resistant rubber pad protects the point of contact. • Supplied with four eye…

Comprises essential equipment required to safely jack up a vehicle. Includes a 2 Tonne trolley jack, a pair of folding wheel chocks, a pair of axle stands (4 Tonne combined), six wheeled padded creeper for comfort whilst carrying out maintenance and L-bar wrench with 17/19mm socket. Features and Benefits • 2 Tonne trolley jack with short wheel base has a lifting range of 130mm to 330mm. • 2 Tonne axle stands (x2) have a combined weight capacity of 4 Tonne (Min./Max. Working Height: 278/366mm). • Padded car creeper with 6 x Ø50mm castors allows for comfort whilst carrying out under car maintenance. • Folding wheel chocks (x2). • L-bar wrench with 17 and 19mm socket. • Model No. JKIT01 Speci…

Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. High quality rubber, providing a sturdy and durable point of contact. Secure fit to vehicle, moulded to fit bespoke vehicle fitting. Supplied in a case for easy storage in your vehicle. Features and Benefits • Designed for the jacking points to protect and prevent damage to jacking points, side skirts and the underside of the vehicle. • High quality rubber, providing a sturdy and durable point of contact. • Secure fit to vehicle, moulded to fit bespoke vehicle fitting. • Supplied in a case for easy storage in your vehicle. • Model No. JP27 Specifications Model No J…

All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle. Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs. Features and Benefits • Min./Max. Working Height: 1200/1862mm. • Capacity: 4 Tonne per stand. • Steel stand. • Pin and chain load support. • Full width crutch. • Designed to support part of a vehicle that is being used on a lift where free access is required. • Stands also help prevent the tipping/rocking of the vehicle. •…

High-density plastic with anti-slip steel bar. Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. Steel chock bracket designed to mount to wall or trailer. Features and Benefits • High-density plastic with anti-slip steel bar. • Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Steel chock bracket designed to mount to wall or trailer. • Chock Dimensions (W x D x H): 200 x 475 x 225mm. • Chock Weight: 1.7kg. • Bracket Weight: 1.36kg. • Model No. CV127 Specifications Model No CV127 Brand: Sealey Dimensions (W x D x H): 200 x 475 x 225mm Ma…

All steel construction with a 680kg capacity powered by 230V Electro/Hydraulic lifting system for simple, fast operation. Heavy-duty ramp and platform with removable rear access panel to aid with wheel removal. Supplied with motorcycle front wheel locking attachment for tyre widths between 75-340mm to assist in securing the vehicle. Fitted with multi-position safety lock to prevent accidental lowering. Suitable for use with centre-stand motorcycles or with a rear paddock stand. Can be easily converted to a mini tractor or quadbike lift with the additional side ramps (Model No. MC680EXK). Features and Benefits • Min./Max. Height: 210-1000mm. • Width: 750mm. • Length: 2000mm. • All steel construc…

• Fully adjustable saddle with forward, backward and side-to-side tilt.• Suitable for use with 3000CXD.• Suitable for jacks with a 31-33mm saddle spigot pin.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for jacks with a 31-33mm saddle spigot pin.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 3000CXD and ADT200 - Maximum capacity is 200kg. • Model No. ADT200Technical Specification:Capacity: 200kgCompatibility: 3000CXDNett Weight: 11.19kgDimensions: Length: 239m…

Lightweight, folding design with wheels make this workbench mobile and allows compact storage where workshop space is limited. With a working height of 455mm, it is ideal for servicing/maintenance. Additionally the loading ramp doubles as a convenient workshop stool. Suitable for professional workshops, mobile mechanics, enthusiasts, track days or as a display table in showrooms. Features and Benefits • Maximum Load Capacity: 360kg. • Transportation wheels for total mobility. • Working height of 455mm, ideal for servicing/maintenance. • Loading ramp doubles as a convenient workshop stool. • Folding design allows compact storage where workshop space is limited. • Suitable for professional workshops, m…

Screw adjustment with easy-to-use spinner nut and ball-bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over a 668mm range. Features and Benefits • Screw adjustment with spinner nut. • Ball-bearing thrust race. • Removable base. • Min./Max. Height: 1364/2032mm. • Model No. ES750 Specifications Model No ES750 Brand: Sealey Capacity: 750kg Maximum Height: 2032mm Minimum Height: 1364mm Nett Weight: 12.78kg