only car jacksin all categories
only car jacks
United Kingdom

Car Jacks

 prices on 1051 model  
Show
Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…
from £40.95
Compare prices and buy Sealey Duplex Lifting Strap Reinforced Sling 4m 3000kg LS3004
Mytoolshed.co.uk (United Kingdom) →
£41.00
Tooled-up.com  →
£41.00
Compare prices2→
Strong steel tube 360 front wheels Can be used between 2 buses Equipped with balancer Equipped with industrial FRL Disc seat for multi-position sitting
£1,549.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Expert Quality, for semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Features & Benefits: • Expert Quality • For semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. • Can also be used for the lifting and transfer of steel beams and as a pulling clamp • Test certificate included Specifications: Depth (Beam Clamp): 110mm Girder Beam Width: 80-354mm Overall Width (Beam Clamp): 235-490mm Safe Working Load (SWL): 5 tonne Steel Plate Thickness: 10mm …
from £117.95 up to £123.79 
Compare prices and buy Draper Expert Beam Clamp 5 Tonne BC5000
Tooled-up.com  →
£118.00
Mytoolshed.co.uk (United Kingdom) →
£118.00
Toolbee.co.uk (United Kingdom) →
£124.00
Compare prices3→
Designed for raising and lowering cars and vehicles in a workshop or garage environment. Lightweight and portable with a handy blow-moulded carry case for storage, this kit will enable you to easily replace parts, repair or perform maintenance on your vehicle safely and efficiently. Kit Comprises: 1 x 2 Tonne Hydraulic jack trolley with handle 2 x Wheel Chocks 2 x Axle Stands 1 x Instruction Manual
£74.39
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5tonne GVW.
£199.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
You may be interested in
The CTJ2250LP is a 2.25 tonne low profile trolley jack ideal for use with cars with low ground clearance. Featuring swivel castors for manoeuvrability, simple to operate lock/unlock valve for raising and lowering, rubber contact pad to prevent chassis damage and extra wide wheels for safe, stable use. This great value jack also comes with a dual purpose wheel handle/brace and two double ended sockets, suitable for a wide range of wheel nuts, meaning the CTJ2250LP is not only ideal for garage use, it’s the perfect jack for quick wheel changes in emergency situations.
£59.94
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Min./Max. Working Height: 1225/1850mm. Capacity: 4tonne per stand. Steel stand. Pin and chain load support. Full width crutch. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle. These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs. Model No. ASH4000
from £427.95 up to £459.99 
Compare prices and buy Sealey High Level Supplementary Support Stand 4 Tonne Capacity
Mytoolshed.co.uk (United Kingdom) →
£428.00
Tooled-up.com  →
£428.00
Zoro.co.uk (United Kingdom) →
£460.00
Compare prices3→
The JCB-TH31501 is a robust, low-profile and double-pump hydraulic trolley jack designed to offer a maximum lifting capacity of up to 1.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH31501 is capable of lifting cars, light commercial vehicles and other vehicles which require high ground clearance up to 355mm in height.The JCB-TH31501's low-profile design makes it suitable for raising vehicles with low chassis clearance, particularly useful when using the racing jack for track days and other associated motorsport events.Thanks to its integrated double-piston mechanism, the JCB-TH31501 is a quick-lift trolley jack, which will save you precious time and effort in comparison …
£114.99
Jcb-tools.co.uk
Delivery: in United Kingdom
Report
Buy!
Jcb-tools.co.uk
Replacement hydraulic ram for SC10.V3 engine crane.
from £112.95 up to £119.99 
Compare prices and buy Sealey Hydraulic Ram for SC10.V3
Tooled-up.com  →
£113.00
Zoro.co.uk (United Kingdom) →
£120.00
Compare prices2→
A hydraulic trolley jack with technology that makes lifting simple while its safety bypass system prevents over-loading, ensures safe operation and also prevents damage and user injury. Its equipped with pump piston dust shields and wiper seals that protect the hydraulic system from contaminants. A compact design allows it to easily fit under low vehicles and in confined spaces.
£199.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground clearance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cmFeatures & Benefits• Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped on …
from £12.95
Compare prices and buy Sirius Car Ramps Pair Extension Only for Low Ground Clearance Cars RM1
Mytoolshed.co.uk (United Kingdom) →
£13.00
Tooled-up.com  →
£13.00
Compare prices2→
Loading support for semi-trailers, max. load 30 t, contact surface Ø 200 mm. Supplied = assembled. Max. load = 30 t. Contact surface = Ø 200 mm. Adjustment range = 1000 - 1300 mm. Product type = uprights. High max. load due to steel construction. Chassis provides easy, fast positioning. Ball bearing base plate. The new Trailer Jack has greatly advanced the safety of semi-trailers and containers when being loaded and unloaded. The telescope loading prevents uncoupled trailers from tipping while being loaded by pallet trucks or due to load changes. This is positioned like a leg below the front edge or the suspension area of semi-trailers or containers.
£2,460.00
KaiserKraft.co.uk
Delivery: to United Kingdom
Report
Buy!
KaiserKraft.co.uk
All articles about car jacks
What are homologated tyres?
Price decides? Is it worth buying Chinese tyres?
Crash course on the choice of winter tyres
The best mid-priced R17 summer tires for SUVs
Scan Engine Mini 1d 3.3 V Decoded Class 2 Note: Image is for illustrative purposes only and may differ from the actual product
£43.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
The Winntec From Sip 20 Ton Trolley Air Bottle Jack Utilises An Aluminium Motor Chromed Pistons And Heat-Treated Cylinder Wall For Durability. Air Filters Prevent Contamination For Performance. • 20 Ton Maximum Weight Capacity • 253Mm To 480Mm Lifting Height Range • 80Mm Screw Extension For Improved Versatility • Heavy-Duty Wide Welded Base Spreads Weight • Polished Main Ram And Chromed Pump Pistons • Heat-Treated Cylinder Wall For Added Durability • Rugged Aluminium Air Motor For Heavy-Duty Use • Designed For Both Horizontal And Vertical Use • Integrated Overload Protections For Safety • Integrated Manual Pump For Versatility • Air Filters Help Prevent Contamination
£375.25
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
This engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with one chain. Features & Benefits: • Adjustable outer extension clamps with rubber feet • Designed to position the engine when replacing the engine mounts. Also suitable for aiding the removal of transmission components and gearboxes • Compatible with most cars and light commercial vehicles • Supplied with one chain Specifications: Capacity: …
from £101.04 up to £104.95 
Compare prices and buy Draper Engine and Gearbox Support 300kg 13349
Toolbee.co.uk (United Kingdom) →
£101.00
Tooled-up.com  →
£105.00
Mytoolshed.co.uk (United Kingdom) →
£105.00
Compare prices3→
VEVOR Motorcycle Jack 1100 lb,Scissor Lift Stand with protective paint covered cradles, motorcycle center scissor lift jack,Scissor Stand for Motorcycles ATVSturdy StructureGreat Load CapacityProtective Paint CoverSafe and FirmErgonomic HandleWide ApplicationRated Capacity: 1,100 lbs (498.95 kg),Table Dimensions: 17.72" x 5.51" (450x140 mm),Color: Blue,Maximum Height: 14.57 in (370 mm),Minimum Height: 7.87 in (200 mm)
£51.99
Vevor.co.uk
Delivery: to United Kingdom
Report
Buy!
Vevor.co.uk
The Sealey JKIT01 Lifting Kit features a Jack, Axle Stands, Creeper, Chocks & Wrench The Sealey JKIT01 offers a 5 piece lifting kit for the DIY mechanic consisting of Jack, Axle Stands, Creeper, Chocks & Wrench. Suitable for working on vehicles up to 2 tonne in weight.  Features:  
- Folding wheel chocks (x2) 
- L-bar wrench with 17 & 19mm socket  
- 1 tonne axle stands (x2) have a combined weight capacity of 2 tonne 
- 2 tonne trolley jack with short wheel base has a lifting range of 140mm to 340mm 
- Padded car creeper with 6 castors allows for comfort whilst carrying out under car maintenance  Specification: 
- Model No: JKIT01 
- Jack Specification:
- Weight: 8.7kg  …
from £123.10 up to £189.26 
Compare prices and buy Sealey JKIT01 Lifting Kit 2 Tonne 5 Piece
Toolstop.co.uk (United Kingdom) →
£123.00
Tooled-up.com  →
£127.00
Zoro.co.uk (United Kingdom) →
£180.00
Toolbee.co.uk (United Kingdom) →
£189.00
Compare prices4→
Bottle jack, with hydraulic unit, max. load 20 t. Supplied = assembled. Max. load = 20 t. Lifting range with lifting head = 235 - 440 mm. Lift = 145 mm. Weight = 10 kg. Overall height from - to = 235 - 440 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.
£219.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Features & Benefits: • Expert Quality • Polyester webbing 90mm wide with reinforced lifting eyes • Colour coded to European standards to identify capacity • The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) • The safe working load (SWL) is rated at 6000kg for a load between the loop eyes ('U' configuration) • …
from £32.95
Compare prices and buy Draper Duplex Lifting Strap Reinforced Sling 90mm 5m 3 Tonne
Tooled-up.com  →
£33.00
Mytoolshed.co.uk (United Kingdom) →
£33.00
Compare prices2→
This 30 Tonne Manual/Air Hydraulic Bottle Jack benefits from an all steel, one piece base, reservoir and pump cylinder which is designed to give added strength. Fitted with safety overload valve and manufactured in the EU.
£999.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead mans handle which also aids controlled lowering speed. Supplied with 45/75mm extensions that close the gap between the saddle of the jack and the jacking point. See chart for detailed specification.
£2,099.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Telescopic hydraulic double ENP (Electroless Nickel Plated) rams allow a reduced closed height without compromising maximum lift height. Fitted with safety overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 3-piece handle.12 Tonne Bottle Jack with Telescopic Ram• Telescopic hydraulic double ENP (Electroless Nickel Plated) rams allow a reduced closed height without compromising maximum lift height.• Fitted with safety overload valve.• Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle.• 3 Year guarantee*.• Model No. PTBJ12SModel No: PTBJ12S:Brand:
£150.48
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle. Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs. Features & Benefits: • Min./Max. Height: 1210/1795mm. • Capacity: 2 Tonne per stand. • Steel stand. • Pin and chain load support. • Full width crutch. • Designed to support part of a vehicle that is being used on a lift where free access is required. • Stands also help prevent the tipping/rocking of the vehicle. • These stand…
from £393.95 up to £422.36 
Compare prices and buy Sealey High Level Supplementary Support Stand 2 Tonne ASH2000
Mytoolshed.co.uk (United Kingdom) →
£394.00
Tooled-up.com  →
£394.00
Toolbee.co.uk (United Kingdom) →
£422.00
Compare prices3→
Trolley Jack / Max Load 3 t / Hubhöhe 400 mm / 17.4 kg / Cushions
£89.95
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
24 more item(s)
1 ... 9 10 11 12 13 ... 44
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height
Got ideas or questions about filters? Click here!
Models