Effects Pedals

Tremolo effect pedal for electric guitar that offers the classic, warm and mind-bending tremolo effects of vintage ‘60s amps. It provides dedicated Rate, Wave and Depth controls for awesome sound shaping, features a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 173 x 99 x 58 mm. Weight: 272 g.
Power Supply: Adapter
UK/EU Power supply included: No
Type: Tremolo
Made in: China
Battery Operation: Yes

Kicking the ULTRA VIBRATO UV300 into action is like putting an invisible, automatic whammy bar on your guitar. From the gentle, pulsing rhythms of the ocean surf, to the wild, whirling effects of a rotating speaker system, the UV300 will bring a dose of days-gone- by to your sound. Select from Unlatch, Bypass or Latch modes and twist the dedicated Rise, Rate and Depth dials to create your ideal vibrato. In Latch mode, the effect is constantly on once you step on it. Unlatch mode only applies the effect while you press down on the pedal, so you can add vibrato to a single note if you like. Your guitar will be playing mind-games with everyone in earshot as familiar, but hardly ordinary, tones …

The TC PowerPlug 9 gives you 9 volts of TC approved power for use with your TC Electronic pedals including TonePrint PolyTune Ditto Loopers and analog drive pedals.

Double pedal booster for 3 effects designed for lifting pedals to the optimum level that can easy to switch between effect pedals located on Pedaltrain pedalboards. This pedal booster has a solid steel frame and can be installed on a pedalboard using velcro or screws, which are accessories.
Variant: PB3
Type: Pedalboard
Colour: Black
Original Colour by Producer: Black;Black
Zip: Yes
Made in: China

Lets get it out the way this pedal sounds best cranked. Known as diming the controls the Behringer HM300 Heavy Metal Pedals circuit gained its legendary reputation by setting every control to 10 and letting the mayhem unfold. This gives the characteristic chainsaw-like buzzing distorted tone by pushing the circuit to extreme levels of clipping. This was the sound of Swedish death metal which is also the reason the original circuit has left such a significant legacy. If you need a distortion pedal to propel your tone to crushing new highs and deliver some of the most grinding textures available the HM300 supplies it in abundance.

The Strymon 9V UK Power Supply can be used to power your Strymon effects pedal and any other 9V centre negative pedals. Offering up to 667mA the Power supply will make sure your pedal is running at maximum allowing you to use your pedal to the best of its ability. Its low noise operation and automatic worldwide voltage conversation Strymons official power supply is perfect as a replacement to keep your pedal going no matter where.

The Behringer HD300 Heavy Metal Distortion Effects Pedal gives you the tools to create high levels of crushing distortion and sustain with ease. Theres serious sustain on offer giving you the ability to get really sludgy crushing sounds with ease. The expanded 4-knob layout gives you total control over your tone with a dedicated Bottom knob perfect for optimising the pedal for lower tunings or 7+ string guitars. If you need to go heavier go with the HD300.

Overdrive effect pedal for guitars that features original 4558 op amps and MA150 distortion diodes, and delivers the classic, authentic vintage vacuum tube-like sound. It provides dedicated Drive, Tone and Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Type: Overdrive
Made in: China
UK/EU Power supply included: No
Battery Operation: Yes

The Behringer UC200 Chorus Pedal enhances every aspect of your guitars tone giving it additional richness thickening every aspect of the guitars sound with a chorus effect that can deliver stereo amazement. With individual controls for the Level Tone Rate and Depth you have an impressive amount of tonal shaping options. When the pedal is inactive you can be assured that your full signal integrity is upheld with maximum clarity and accuracy.

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Type: Power Supply
Made in: China
Polarity: Center Minus
Voltage: 9V
Plug Type: Barrel
Current (mA): 1300.0

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

The Behringer TU300 Chromatic Tuner is a necessity for any modern performer. Keeping your instrument at the correct tuning is essential to any performer and this makes that job a whole lot easier. Featuring a seven-segment LED indicator you can select between seven different tuning modes and an eleven-point stream meter can ensure the utmost precision at any moment. Whether you are on stage or in the studio this is the perfect companion for you.

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Made in: Vietnam
Colour: Black
Size: L
Variant: Large
Material: Aluminium

The Behringer UM300 stakes a claim for being the most versatile distortion pedal on the market. The EQ shaping options are a step above most similar units with a sweepable mid boost/cut which allows you to flick back and forth between old school mid-scooped metal tones and much fatter doomier mid-heavy sounds. This is complemented by the astonishing amount of gain this pedal can dish out. Id wager the Ultra Metal has more gain than any player needs but feel free to put this to the test. Always better to have too much than not enough!

The Behringer CS400 Compression and Sustain Ultimate Dynamics effects pedal is the perfect option for balancing your level. Ensuring that your quieter strikes ring with resonance while simultaneously reducing harsh loud tones. With intuitive controls for Level Tone Attack and Sustain you can fully personalise this stompbox tone to maximise its full potential. Utilising an active status LED you will always be able to tell when this pedal is enhancing your dynamics.

The power supply 1 SPOT you can use anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either. the 1 SPOT is one of the quietest power sources. It is the 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.
Polarity: Center Minus
Power Supply: 9V;Adapter
Voltage: 9V
Plug Type: Barrel
Colour: Black
Type: Adapter
Variant: 1 SPOT
Current (mA): 1700.0
Made in: China
Current: 1700 mA
Connector Angle: Straight
ChargerType: Power Supply…

500mA, 305 cm cable lenght, 9V DC, switchmode power supply, 2.1/5.5mm connector (inside/outside), power LED, polarity minus inside, weight: 142 g
Made in: China
Voltage: 9V
Power Supply: 240V
ChargerType: Power Supply
UK/EU Power supply included: No
Current (mA): 500.0
Current: 201-500 mA
Polarity: Center Minus
Plug Type: Barrel
Number of Outputs: 1

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Made in: United Kingdom
Compatible with: Headrush Mx5
Type: Dust Cover

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Made in: China
Voltage: 12V
Current (mA): 1000.0
UK/EU Power supply included: No
Power Supply: 240V
ChargerType: Power Supply
Polarity: Center Minus
Current: 701-1000 mA
Plug Type: Barrel
Number of Outputs: 1

Custom moulded in the UK to fit the contours of the Strymon Nightsky & Volante. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Strymon Nightsky & Volante.
Compatible with: Strymon Nightsky / Volante
Made in: United Kingdom
Type: Dust Cover

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Strap: Yes;Shoulder Strap
Colour: Black
Original Colour by Producer: Black;Black
Handle: Yes
Waterproof: Yes
Type: Pedal Bag
Made in: Vietnam
Padding: Yes

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Colour: Black
Type: Footswitch
Battery Operation: No
Number of Buttons: 3
Power Supply: Passive