United Kingdom

Car Jacks

 prices on 1065 models  
Show
• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…
from £59.95 up to £79.73 
Compare prices and buy Sealey Motorcycle Roll-in Wheel Clamp - Bolt Down
£60.00
£80.00
Compare prices2
The Pitking Products quick lift "monkey" jack is designed to be carried on-board the rally car for use in a critical/emergency situation. The jack is lightweight and compact with a sturdy base which is produced from a high grip plastic/rubber suitable for all terrains giving the jack a solid stand point every time. 730mm maximum lifting height ideal for where extra height is neededLightweight and compact designIdeal to keep in a rally car for emergency repair useTo operate, the jack is positioned next to the vehicle at the jacking point, with the protruding leg on the platform used to raise the car. The jack has a ratchet mechanism to lift the vehicle and travels from the minimum point of
£195.55
Demon-tweeks.com
Delivery: in United Kingdom
Report
Buy!
Demon-tweeks.com
Eight adjustable rollers (four each side), allow for easy turning of large deep tread tyres. Extra-large jacking handle allows for one-person operation. Wheel support bar with composite guard goes around wheel to ensure stability during transportation. Locking mechanism allows rollers to be fixed at eight preset positions. Mounted on two locking and two non-locking castors for improved stability and easy manoeuvrability. Ideal for use on agricultural and commercial wheels and tyres. Features & Benefits: • Min./Max. Wheel Diameter: Ø1000/2000mm. • Eight adjustable rollers (four each side), allow for easy turning of large deep tread tyres. • Extra-large jacking handle allows for one-person operati…
from £990.95 up to £1,146.53 
Compare prices and buy Sealey Wheel Removal Trolley 1200kg W1200T
£991.00
£991.00
£1,147.00
Compare prices3
Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LE - Trolley Jack 2tonne Low Entry Short Chassis - Red AP600JB - Trolley Jack Bag 600mm AS2000F - Axle Stands (Pair) 2tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - 3pc 1/2"Sq Drive Extendable L-Bar Wrench Set You may also refer to the individual Model No. for full specification.
£179.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground clearance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cmFeatures & Benefits• Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped on …
from £12.95
Compare prices and buy Sirius Car Ramps Pair Extension Only for Low Ground Clearance Cars RM1
£13.00
£13.00
Compare prices2
A great 2.5 tonne low entry (100mm), height adjustable aluminium/steel garage jack benefiting from a twin piston pump for a quick lift action. Features include a rubber pad which protects the vehicle underside and nylon non-marking wheels for quieter movement. Ideal for use with sports and racing cars.
£203.98
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
VEVOR Motorcycle Jack, Hydraulic Motorcycle Scissor Jack with 300LBS Load Capacity, Portable Lift Table, Adjustable Motorcycle Lift Jack, Blue Motorcycle Lift Stand with Lockable CastersStable StructureEasy to UseNon-Slip PlateSafe Locking BarFastening StrapCompact DesignLift Mechanism: Hydraulic,Panel Size: 42x35 cm (16.54"x14.17"),Working Height Range: 35-87 cm (13.78"-34.25"),Color: Blue,Lift Capacity: 300 lb (136.08 kg),Package Size: 46x39x37 cm (18.11"x15.35"x14.57")
£138.99
Vevor.co.uk
Delivery: to United Kingdom
Report
Buy!
Vevor.co.uk
Note: Image is for illustrative purposes only and may differ from the actual product
£3,699.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Compact automotive wheel chocks for use during emergency wheel change.• To be used on a flat surface only.• Fold flat for easy storage in glove box or door pocket.Compact automotive wheel chocks for use during emergency wheel change. To be used on a flat surface only. Fold flat for easy storage in glove box or door pocket.• Compact automotive wheel chocks for use during emergency wheel change. • To be used on a flat surface only. • Fold flat for easy storage in glove box or door pocket. • Folded (W x D x H): 83 x 167 x 28mm (x2). Open: 83 x 167 x 133mm (x2). • Model No. WCF01Technical Specification:Applications: Suitable for cars only, below 2tonne, only on level surface, service purposesDimensio…
from £20.95 up to £21.57 
Compare prices and buy Sealey Folding Wheel Chocks - Pair
£21.00
£21.00
£22.00
Compare prices3
4-piece set Universal fit Size: 69 cm x 45 cm front. 43 cm x 45 cm back High-quality rubber quality Can be cut to fit
£23.18
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …
from £11.95 up to £13.95 
Compare prices and buy Sealey Bobbin Supports for RPS2
£12.00
£14.00
£14.00
Compare prices3
All steel construction compact heavy duty jack with 2 tonne axle stands and safety wheel chocks. Covers lifting and safety needs. Jack lifting range 135mm to 340mm with built in pump overload prevents over loading for safe operation with hydraulic bypass system to stop ram over travel. Supplied with heavy duty plastic carrying case for safe storage. Product size: 510 x 300 x 17mm, weight 14.8kg.
£101.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
from £32.95 up to £42.59 
Compare prices and buy Draper Wide Load Sling, 4m x 120mm, 4 Tonne
£33.00
£33.00
£43.00
Compare prices3
A useful scissor jack which is ideal as a replacement jack for many vehicles and for many other uses.
£17.99
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Fitment: Fits various Domestic USA, Japanese, and European Vehicles Color : Black Description This Universal Jack Pad Adapter fits most Japanese and domestic made cars. This product is used to protect the undercarriage metal jack point railing that is on most vehicles. Highly durable and resistant to damage, it will keep the chassis rails from getting pinched, bent, and broken. Polyurethane is soft enough to not harm your vehicle's metal yet rigid enough to support it. Great for DIY vehicle maintenance or taking one with you in the car as some tire shops do not use these pads, and unfortunately bend your pinch/scrape off paint on the welds. This can eventually lead to rust, save yourself …
£7.38
Joom.com
Delivery: in United Kingdom
Report
Buy!
Joom.com
2 Bellows w/ Handle Air Jack
£499.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• All steel construction with bolted height adjustment.• Ideal for long term motorcycle storage.• Sold in pairs.Technical SpecificationNett Weight: 2.04kgCapacity: 100kgMinimum Height: 325mmMaximum Height: 395mmTechnical Specification:Capacity: 100kg Minimum Height: 325mm Maximum Height: 395mmDimensions: Length: 110mm x Height: 330mmWeight: 2.4KgWarranty: 1 year
from £20.95 up to £23.53 
Compare prices and buy Sealey Swingarm Stands
£21.00
£24.00
Compare prices2
The JCB-TH32515 is a robust, low-profile and double-pump hydraulic trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Constructed with a high quality and heavy-duty steel frame, the JCB-TH32515 is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 505mm in height.The JCB-TH32515’s chassis utilises an extra low-profile design, which allows the trolley jack to reach lower clearances, particularly useful for sports cars or vehicles with reduced ground clearance.Thanks to its double-piston design, the JCB-TH32515 is a quick-lift trolley jack, which will save you precious time and effort in…
£149.99
Jcb-tools.co.uk
Delivery: in United Kingdom
Report
Buy!
Jcb-tools.co.uk
Quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor* (30mm max spigot pin) and you are ready to lift. Suitable for jacks with a 30mm saddle spigot pin. *Note: Remove any rubber jack pad from the saddle before using to improve safety.
from £114.95 up to £130.64 
Compare prices and buy Sealey Cross Beam Adapter 3 Tonne 4 x 4
£115.00
£115.00
£120.00
£131.00
Compare prices4
Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2pc handle. Fitted with carrying handle.
£189.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…
from £78.95 up to £101.95 
Compare prices and buy Sealey Beam Clamp 2tonne
£79.00
£79.00
£82.00
£102.00
Compare prices4
Scissor action jack suitable for automotive, industrial and agricultural applications. Ideal for vehicles with low ground clearance. 4tonne Front scissor nose capacity with minimum height of 65mm allows use under forklifts. 5tonne Cylinder cap capacity with minimum height of 416mm suits agricultural and other vehicles with high set jacking points.
£599.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Telescopic hydraulic double ENP (Electroless Nickel Plated) rams allow a reduced closed height without compromising maximum lift height. Fitted with safety overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 3-piece handle.12 Tonne Bottle Jack with Telescopic Ram• Telescopic hydraulic double ENP (Electroless Nickel Plated) rams allow a reduced closed height without compromising maximum lift height.• Fitted with safety overload valve.• Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle.• 3 Year guarantee*.• Model No. PTBJ12SModel No: PTBJ12S:Brand:
£150.48
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Patch cable cat 5e Up to 3m
£7.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height