Car Jacks

• Made from durable polypropylene.• These ramps are designed to allow jacking access to suitable jacking points on the vehicle.• Not intended to raise a vehicle enough for under vehicle servicing.Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing.• 3tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LRTechnical Specification:Capa…

• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 14.5mm. Size ø95mm. Fits saddle ø95-97mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 14.5mm. • Size: ø95mm. • Fits saddle ø95-97mm. • Model No. JP14Technical Specification:Nett Weight: 0.15kgJack Pad Size: ø95mmStyle: Type BProfile Depth: 14.5mmTo Fit Saddle Size: ø95-97mmWeight: 0.15kgDimensions: Length: 20mm x Height: 190mmWeight: 0.15KgWarranty: Consumable

Expert Quality, for stabilizing HGVs whilst parked. Manufactured from anti-slip, non-sparking, highly visible weatherproof heavy duty HDPE plastic. Sold loose as single chock.

• DESIGNED FOR THE JACKING POINTS - protects and prevents damage to jacking points, side skirts and the underside of the vehicle.• HIGH QUALITY RUBBER - providing a sturdy and durable point of contact.• SECURE FIT TO VEHICLE - moulded to fit bespoke vehicle fitting. - to protect and prevent damage to jacking points, side skirts and the underside of the vehicle.Technical SpecificationApplication(s): 1 Series: E81. E82, E87 1M.2 Series: F22, F23, F45, F46.3 Series: E46, E90, E91, E92, F31.4 Series: F32.5 Series: E39, E60, E61, E63, F07, F10, F11, M5.6 Series: E63, E64, F06, F13, M6.7 Series: E38, E65, E66, F01, F02.E84 X1, X3 E83, F25, X4, X5 E53, E70, X5M, E71 X6, X6MZ4, M-Roadster/Coupe E85, E…

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Single nylon reinforced rubber wheel chock.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Fitted with eye bolt for rope or chain.Single nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Fitted with eye bolt for rope or chain. Suitable for vehicles below 10 Tonne.• Single nylon reinforced rubber wheel chock. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Fitted with eye bolt for rope or chain. • Suitable for vehicles below 10tonne. • Model No. WC03Technical Sp…

• Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.• N.B. Never use brake fluid to top-up a hydraulic unit.Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.N.B. Never use brake fluid to top-up a hydraulic unit.• Recommended for use in all jacks (trolley and bottle) and cranes. • Model No. HJO500MLSTechnical Specification:Nett Weight: 0.47kgPack Qty: 1Size: 500mlDimensions: Length: 60mm x Height: 213mmWeight: 0.472KgWarranty: Consumable

• Farm jack mount for use on 4x4 external spare wheel mount.• Designed for transporting farm jacks when going off-road.• Adjustable base makes it suitable for most vehicles with an externally mounted spare wheel.Farm jack mount for use on 4x4 external spare wheel mount. Designed for transporting farm jacks when going off-road. Adjustable base makes it suitable for most vehicles with an externally mounted spare wheel.• Farm jack mount for use on 4x4 external spare wheel mount. • Designed for transporting farm jacks when going off-road. • Adjustable base makes it suitable for most vehicles with an externally mounted spare wheel. • Minimum/Maximum Depth: 120/175mm. • Model No. FJWMBTechnical Specification:Ne…