Car Jacks

The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…

Heavy-duty, industrial quality, dual purpose toe lift bottle jack. Has a lifting capacity of 10tonne on the toe of the jack and 14tonne on the head. Designed to lift heavy plant or machinery where there is limited ground clearance such as fork lift trucks, machine installation or for use on construction sites. Fitted with a 280 rotating handle to enable jacking in confined spaces.

The Sealey cross beam adaptor is ideal for use with front wheel drive vehicles and is suitable to be used with jacks with a 31 - 33mm saddle spigot pin. This cross beam also provides extra when locating awkward jacking points and the robust manufacture makes this an ideal tool for any workshop or garage.

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

The Pitking Products quick lift "monkey" jack is designed to be carried on-board the rally car for use in a critical/emergency situation. The jack is lightweight and compact with a sturdy base which is produced from a high grip plastic/rubber suitable for all terrains giving the jack a solid stand point every time. 730mm maximum lifting height ideal for where extra height is neededLightweight and compact designIdeal to keep in a rally car for emergency repair useTo operate, the jack is positioned next to the vehicle at the jacking point, with the protruding leg on the platform used to raise the car. The jack has a ratchet mechanism to lift the vehicle and travels from the minimum point of

Lightweight and fast lift, ideal for bodyshops, tyre bays etc. Supplied with 75mm removable support cup.Min height 115mm, max height 430mm. Working pressure: 8 bar, lifting time 3 seconds, pressure blow off valve. To be used in conjunction with axle stands.

The Clarke CTJ1500QULP combines the benefits of an ultra low profile and a quick lift trolley jack. These features are very useful for rapid operation on very low cars making it ideal for motor sports and mobile operators.

Max Load 2 t / Hubhöhe 330 mm / Cushions

BLACK trapezoidal lift Capacity up to 1500kg Lifting capacity up to 1500kg Swivel rubber head included Quick lifting High-quality trapezoidal car lift with a manual drive, with a lifting capacity of up to 1500 kg. The working height is from 90 mm to 330 mm. The jack is designed for lifting passenger cars with a total weight not exceeding 1500 kg in order to replace the wheel. Its other advantages are ease and speed of operation as well as resistance to dirt. The device has a rotating head, and when folded, it takes up very little space Technical data lifting capacity:1500kg Minimum height :90mm Maximum height :330mm Libra :approx. 2kg

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

0.2 kg

The SIP 12 Ton Bottle Jack is compact and powerful, and features a built-in safety valve, screw extension for adjustable lifting heights, and a serrated saddle to give secure load contact. 12 Ton maximum weight capacity 210mm to 415mm lift height range 60mm screw extension is included Serrated saddle for secure contact Durable and powerful construction Compact and very lightweight Reliable overload protections Heavy-duty cast iron base Integrated safety valve

The WINNTEC® from SIP 10 TON Low-Profile Bottle Jack is perfect for pushing and pressing in garages and workshops, with increased versatility achieved through full horizontal and vertical operation and performance via heavy-duty components. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 120mm to 260mm lifting height range Low-profile design ideal for performance vehicles 45mm and 6mm screw extensions for high versatility Heavy-duty wide cast iron base spreads weight Designed for horizontal and vertical operation WINNTEC® from SIP 3-Year Warranty

This durable 3 Tonne jack is specifically designed for the professional garage or workshop and features a super-strong chassis with heavy duty wheels & castors and a wide footprint for stability.- Lifting Capacity: 3 Tonnes- Extra strong long 2 piece handle- Saddle height: Min 136mm. Max 465mm- Dimensions (LWH): 572 x 328 x 175mm- Weight: 28.3PTDCLA7623032