Jigsaw Blades

The hooked tip is useful for removing creepers and cutting twigs. Super Turbocut teeth provide effortless cutting of wood in all directions. the bark cutter prevents the peeling-off of remaining bark when a branch is cut. It is also convenient to remove twigs and creepers. A notch in the cutting blade allows the saw to be hung on a branch during the pruning. The two section pole can readily be extended to a desired length by operating the lever and buttons.Features & Benefits:• JG-1 Grip• SH-UV Sheath• Curved Blade• Seperate bark cutterSpecifications:Surface Finishing: Hard-Chrome PlatingMaterial: High-Carbon SteelTooth Type: SUPER TURBOCUTImpulse Hardened: NoTooth Pitch: …

The hooked tip is useful for removing creepers and cutting twigs. Super Turbocut teeth provide effortless cutting of wood in all directions. the bark cutter prevents the peeling-off of remaining bark when a branch is cut. It is also convenient to remove twigs and creepers. A notch in the cutting blade allows the saw to be hung on a branch during the pruning. The two section pole can readily be extended to a desired length by operating the lever and buttons.Features & Benefits:• JG-1 Grip• SH-UV Sheath• Curved Blade• Integral bark cutterSpecifications:Surface Finishing: Chemical NickeledMaterial: Strip SteelTooth Type: SUPER TURBOCUTImpulse Hardened: NoTooth Pitch: 4.5mmTooth …

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

The Starlock AIZ 32 APB blade guarantees exact flush and deep plunge cuts in wood, metal and plastics. It cuts precisely right from the start thanks to a rounded cutting edge called Curved-Tec. The blade's Starlock sturdy mounting system increases control for highly accurate cutting that transmits power directly and reduces wobbling. This versatile blade also cuts through very hard combined wooden and metal materials including non-hardened nails and screws, non-ferrous pipes and profiles with smaller dimensions. When cutting non-hardened metals and abrasive materials, the BIM (bi-metal) combination of an HCS (high carbon steel) blade and HSS (high-speed steel) teeth resists wear and heat, ensuring …

Expert Metalmax For Long Life Cutting Hard Metal:- When hardened screws rust or otherwise get stuck, cutting them off perfectly flat to the surface is the only option. The EXPERT MetalMax makes a perfect flush cut even in hardened metal and, with its outstanding longevity, is the perfect accessory for the tradesman wanting to cut tough materials with a multitool.- You've seen the multitool's astonishing ability to cut into and through wood with ease: with the Bosch EXPERT MetalMax Blade for Multitool metal gets the same treatment. It even cuts hardened window screws and rebar with ease.Features:- Long Life Cutting Hard Metal- Extreme durability is built in with Bosch Carbide Technology- Extra …

The Vitrex 10 3412 Ultimate Diamond Blade is suitable for use in a tile cutter and has both high strength and durability. It has a continuous rim which produces extra clean cuts on ceramic, porcelain, granite, marble and natural stone. In addition, it helps to prevent chipping and cracking of tiles, which can be a common problem. For use with Vitrex Electric Cutters WS560180, 103420, 103421 and 103430. Diameter: 200mm.Additional Information:• Diameter: 200mm

Compatibility - Check compatibility with other FEIN machines (see description below)
Slim, tapered shape for optimal cutting speed and good chip removal
Fit For Any Job - Fein Tool is available in two mount types, so one can find the ideal accessory for multifunctional tool. Whether it's StarLock or Fein SuperCut 12-sided mount, there's a Fein Tool that suits needs

Designed to fit both Makita and other manufacturer’s saws, tip embedded, or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and screw embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Features & Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity Specifications • Bore: 30mm • Diameter: 305mm • Kerf: 2.3mm • Rake: 5° • Thickness: 1.8mm • Tooth Count: 32 • Material Type: Wood/Nails • Machine Type: Mitre saw

Fine quality, made in Germany

FEATURES:- Operating length: 430 mm- For simple cuts in vertically perforated bricks