Car Jacks

Suitable for heavy engines including 6-cylinder variants. Supports engine during maintenance operations including engine mounting replacement. Beam is supported on two rubber covered feet with third, height adjustable foot, resting on the front of the vehicle. Supplied with two short lengths of chain.

The Master Lock Carry Strap No. 3126EURDAT features a 2.5m long x 25mm and 5.5m long x 25mm crossed straps with zamac buckles. They are a readymade carrying solution with a strap and an integrated handle.They are ideal to carry cartons or pieces of furniture, the metal cam buckle enables you to adjust the length of the strap. The two handles with foam finish make the use even more comfortable. Colour: Red.Strap Width: 25mm. Additional Information:• Length: 2.5 & 5.5m• Type: Carry Strap• Load Capacity: 80kg

• Designed to support and assist to accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using screw/hook mechanisms.• This model has the additional advantage of a 360° adjustable rotating cross beam to enable a greater range of support options when in use.Designed to support and assist to accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmis…

Heavy-duty, cast steel, lever-ratchet operated jack with reversible ratchet mechanism enabling it to be used for lifting or lowering. Versatile and lightweight unit, suitable for pulling tree stumps and tensioning fences as well as a positioning aid for heavy machinery. Upper jaw is adjustable on beam, allowing jack to be used as a clamp. Features & Benefits: • Min./Max. Height: 125/1330mm. • Heavy-duty, cast steel, lever-ratchet operated jack with 1500mm beam. • Reversible ratchet mechanism enables jack to be used for lifting or lowering. • Upper jaw is adjustable on beam, allowing jack to be used as a clamp. • Versatile and lightweight unit, suitable for pulling tree stumps and tensioning…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 2m x 60mm, 2 Tonne

Steel chassis with PVC rollers and four Ø100mm nylon swivel castor wheels. Capacity: 560kg. Maximum Opening: 595mm. Maximum Tyre Width: 300mm. Note: Sold as singles, but must be used in pairs.Features & Benefits:• Steel chassis with PVC rollers and four Ø100mm nylon swivel castor wheels.• Capacity: 560kg.• Maximum Opening: 595mm.• Maximum Tyre Width: 300mm.• Nett Weight: 17kg.• Note: Sold as singles, but must be used in pairs.• Model No. WS560Specifications:Model No WS560Brand: SealeyCapacity: 560kgCastor Diameter: Ø100mmMaximum Opening: 595mmMaximum Tyre Width: 300mm

Powder coated pressed steel frame, to ensure strength and durability. Ideal for use with off-road/trials bikes to easily lift the bike when needing to perform maintenance, servicing or cleaning. Simple, one foot, step-and-lift mechanism means the bike can be instantly raised in one motion. For added safety, features an ‘over centre’ locking toggle linkage to mechanically lock the lift at full height to prevent accidental lowering. Also fitted with hydraulic dampener for controlled descent. Features & Benefits: • Min./Max. Height: 300/410mm. • Maximum Capacity: 150kg. • Powder coated pressed steel frame, to ensure strength and durability. • Ideal for use with off-road/trials bikes to easily li…

Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. Features & Benefits: • A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600TR and ADT3 - Maximum capacity is 500kg. • Model No. ADT3 Specifications: Model No ADT3 Brand: Sealey Capacity: 500kg Compatibility: 300TR, 300TRQ, 600TR, 600TRQ Nett Weight: 10.82kg

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 207/402mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ5S Specifications: Model No PBJ5S Brand: Viking Capacity: 5tonne Hydraulic Lift: 125mm Maximum Height: 402mm Minimum Height: 207mm Nett Weight: 3.95kg Screw Extension: 70mm

Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms. Supplied with two short lengths of chain. Features & Benefits: • 500kg Capacity. • Min./Max. Width: 585/1580mm. • Designed to support and accurately position engines during maintenance operations. • Ideal for supporting the engine whilst replacing anti-vibration mountings and certain body panels. • Aids with the removal of gearboxes and transmissions. • Supplied with two short length…

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 4m x 150mm, 5 Tonne