Car Jacks

Made primarily for the motor racing enthusiast, this jack weighs in at just 26kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons, bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up. Features & Benefits: • Min./Max. Saddle Height: 95/485mm, allowing low entry. • Chassis Length: 725mm. • Made primarily for the motor racing enthusiast, this jack weighs in at just 26kg. • Utilises many weight saving techniques such as skeletal lift arm…

• Base and reservoir machine welded for increased strength and reduced chance of leakage.• Fitted with overload valve.• Supplied with 2-piece handle.• Fitted with carrying handle.Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Supplied with carrying handle.• Min./Max. Height: 227/457mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2pc handle. • Fitted with carrying handle. • Model No. SJ15Technical Specification:Capacity: 15tonneHydraulic Lift: 150mmMaximum Height: 457mmMinimum Height: 227mmNett Weight: 7.00kgScrew Extension: 80mmDimensions: Length: 151mm x Heig…

Features & Benefits: • Jack Stands ideally suited to the professional trade workshop!• Manufactured from heavy duty steel• Pin type for added safety and strength• Pin wire strap secured to stand to prevent loss• Deep saddle for positive location under vehicle• Adjustable Height• Conforms to international standards CEMaterial: Heavy Duty SteelStandard: CECapacity: 1350kgMinimum Height: 255mmMaximum Height: 370mmLift Height: 110mmSaddle Diameter: 18 x 50 x 62mmBase Area: 195 x 180mm

• SPACE SAVING - Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall.• 5 AND 6 TONNE - Suitable for Sealey axle stands AS6, AS5000, AAS500 and VS2006 ranges as well as most other brands of axle stand.• HEAVY DUTY FIXINGS - Supplied with wall mounting fasteners.• SECURE - Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling.Technical SpecificationNett Weight: 2.8kg

• Lightweight and portable with 667mm handle and two composite wheels for manoeuvrability.• Can be stored vertically to save space.• Robust high resistant diaphragm for durability.• Internal, military gauge steel, telescopic interlocking core.• Overload safety and air vacuum valve for rapid lowering.• Ideal for workshop or roadside use, takes the effort out of lifting heavy plant, tractors and commercial vehicles.• Suitable for use in high risk environments such as mining or the petroleum industries.• Fast lift, can reach maximum height in 25 seconds.Features a handle and wheels for use in the garage, workshop or mobile mechanics. Lightweight with a low entry height of 135mm lifting to a max…

• Heavy-duty 7 Tonne short axle stands.• Sturdy welded steel construction for superior safety and strength.• Large crutch for good load distribution.• Supplied with captive pin load support.• Suitable for use with forklifts and vehicles with low suspension.• Sold in pairs.Heavy-duty short axle stands. Sturdy welded steel construction for superior safety and strength. Large crutch for good load distribution. Supplied with captive pin load support. Suitable for use with forklifts and vehicles with low suspension. Sold in pairs.• Min./Max. Working Height: 244/354mm. • Capacity: 14tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • For forklifts and vehicles with low …

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 1 metre

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.5mm. Size ø86mm. Fits saddle ø83-88mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.5mm. • Size: ø86mm. • Fits saddle ø83-88mm. • Model No. JP11Technical Specification:Nett Weight: 0.045kgJack Pad Size: ø86mmStyle: Type BProfile Depth: 7.5mmTo Fit Saddle Size: ø83-88mmWeight: 0.045kgDimensions: Length: 10mm x Height: 190mmWeight: 0.05KgWarranty: Consumable

Everbuild Black Jack® 902 Bitumen & Flashing Primer is a thin black primer used to give a key prior to applying bitumen paints and roof coatings. Also suitable as a primer prior to applying Black Jack® Flashing Tape.1 x Everbuild Black Jack® 902 Bitumen & Flashing Primer 1 litreAdditional Information:• Type: Primer• Size: 1 litre

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks.