Effects Pedals

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

Distortion effect pedal for electric guitar that pushes distortion to the extreme by producing crushing, bottom-heavy distortion for modern metal and hard rock. It features gain boost circuitry that delivers super-thick and heavy distortion with low-end punch and endless sustain, dedicated Gain Boost, Distortion, Tone, Bottom and Level controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and first-class electronic on/off switch for highest signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: …

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

The Behringer UC200 Chorus Pedal enhances every aspect of your guitars tone giving it additional richness thickening every aspect of the guitars sound with a chorus effect that can deliver stereo amazement. With individual controls for the Level Tone Rate and Depth you have an impressive amount of tonal shaping options. When the pedal is inactive you can be assured that your full signal integrity is upheld with maximum clarity and accuracy.

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

The Behringer TO800 Vintage Tube Overdrive pedal is a faithful recreation of that classic green overdrive. The inclusion of the defining 4558 op-amp chip is a nice nod to the original design along with the familiar 3-knob layout which both looks sleek and is remarkably easy to use. With these controls you can adjust the level of the effect adjust the tone and set how much gain youd prefer. This allows you to sculpt your tone however you see fit from a light boost to thick resonant overdrive. Whatever crunchy tone youre after the TO800 will deliver.

The Strymon 9V UK Power Supply can be used to power your Strymon effects pedal and any other 9V centre negative pedals. Offering up to 667mA the Power supply will make sure your pedal is running at maximum allowing you to use your pedal to the best of its ability. Its low noise operation and automatic worldwide voltage conversation Strymons official power supply is perfect as a replacement to keep your pedal going no matter where.

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Made in: United Kingdom
Type: Dust Cover
Compatible with: Boss 500 Series

The Behringer UM300 stakes a claim for being the most versatile distortion pedal on the market. The EQ shaping options are a step above most similar units with a sweepable mid boost/cut which allows you to flick back and forth between old school mid-scooped metal tones and much fatter doomier mid-heavy sounds. This is complemented by the astonishing amount of gain this pedal can dish out. Id wager the Ultra Metal has more gain than any player needs but feel free to put this to the test. Always better to have too much than not enough!

Compression/sustain effect pedal for guitar that compress loud and boost low signals without degrading the original sound. Effect provides dedicated Level, Tone, Attack and Sustain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Type: Sustainer;Compressor
UK/EU Power supply included: No
Power Supply: Adapter
Made in: China
Battery Operation: Yes

Custom moulded in the UK to fit the contours of the Strymon Nightsky & Volante. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Strymon Nightsky & Volante.
Type: Dust Cover
Compatible with: Strymon Nightsky / Volante
Made in: United Kingdom

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Polarity: Center Minus
Plug Type: Barrel
Voltage: 9V
Current (mA): 1300.0
Made in: China
Type: Power Supply

A chromatic pedal tuner. It offers 7 different tuning modes including normal, flat, double flat and chromatic mode. The tuning progress is displayed via a single-digit LED display and an 11-point stream meter. Two additional directional LEDs indicate the required tuning direction. In addition, the tuner is equipped with one ¼'' input, one ¼'' output and a Bypass output. Powered by a 9V battery or a 9V adapter (not included).
UK/EU Power supply included: No
Made in: China

The Truetone 1 Spot 9V Guitar Pedal Power Supply EU presents a source for all your music. A power cable you can always rely on the durable design is perfect for a gig environment. Able to withstand any on-stage antics that can sometimes occur youll be able to perform with confidence as your pedals remain on for the duration of your gig.Compact robust and reliable. This power supply securely attaches onto your pedal with 3m length so you can put your pedals exactly where you want them. At an affordable price you can ensure your gig goes smoothly - gear you can trust.

500mA, 305 cm cable lenght, 9V DC, switchmode power supply, 2.1/5.5mm connector (inside/outside), power LED, polarity minus inside, weight: 142 g
Power Supply: 240V
Voltage: 9V
Polarity: Center Minus
Current: 201-500 mA
Current (mA): 500.0
Number of Outputs: 1
ChargerType: Power Supply
UK/EU Power supply included: No
Made in: China
Plug Type: Barrel

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Made in: United Kingdom
Type: Dust Cover
Compatible with: Headrush Mx5

Custom moulded in the UK to fit the contours of the Boss 200 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 200 Series.
Compatible with: Boss 200 Series
Made in: United Kingdom
Type: Dust Cover

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Original Colour by Producer: Black;Black
Strap: Shoulder Strap;Yes
Made in: Vietnam
Colour: Black
Handle: Yes
Type: Pedal Bag
Waterproof: Yes
Padding: Yes

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Power Supply: 240V
Current: 701-1000 mA
Made in: China
Current (mA): 1000.0
Number of Outputs: 1
Plug Type: Barrel
UK/EU Power supply included: No
ChargerType: Power Supply
Polarity: Center Minus
Voltage: 12V

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Power Supply: Passive
Type: Footswitch
Number of Buttons: 3
Colour: Black
Battery Operation: No

Mix and match up to 4 TC-Helicon vocal effect pedals together conveniently, simply and with less cable clutter than ever before with this essential audio and power accessory kit-ideal for VoiceTone Singles. With the included 12-volt power supply and DC interconnect cables, there are many different options for connecting your TC-Helicon effects. The power supply in the Singles Connect kit is more than powerful enough to power one of our large multi-FX units and a VoiceTone Single pedal at the same time.
Colour: Black
Made in: China
~ Length: 0 m

The Behringer FCV100 V2 Volume and Modulation Pedal is a powerful two-in-one pedal that controls all the dynamics of your playing. Use your foot to alter the volume giving you hands-free control over your level. It also functions as an expression pedal when connected to devices with correct input. With adjustable minimum volume the level of expressiveness is totally up to you; regardless of how you use it though the VCA control ensures reliability and remarkably smooth performance. Expressiveness made easy tailor your dynamics with ease while keeping your hands free.

The Behringer FX600 Digital Multi-FX Pedal is a compact footswitch packed with a wide variety of effects. Thanks to these effects such as flanger chorus phaser delay tremolo and pitch shifter you are able to discover its tonal possibilities in order to find your own signature sound. The FX600 truly brings your sound to life with the 24-bit/40kHz resolution offering the purest performance possible. This pedal operates two ways using a 9V battery or using the Behringer PSU-SB DC power supply which is sold separately. Discover your style.

This well-built, real-feel pedal comes with a non-slip rubber plate — essential when performing on hardwood or slip-prone surfaces — and an extended cable (2.2 m) for stacked multi-keyboard setups. It is compatible with half-damper capable keyboards, and it can also serve as a standard pedal switch (for sustain, etc).
Type: Sustain Pedal;Half Damper
Made in: Malaysia
Original Colour by Producer: Black;Black
Polarity Switch: No
Colour: Black
Compatible with: Universal
Cable Length: 2,2 m
Type-A Connector: TRS 6,3 mm Jack