Car Jacks

Material: Aluminium/Steel
Designed for pinpoint lubrication to small and awkward areas
Needle Length: 40mm
Model number: 43982

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 3 tonne x 1 metre

Replacement hydraulic ram for SC10LR.V2 engine crane. Features & Benefits: • Replacement hydraulic ram for SC10LR.V2 engine crane. • Model No. SC10LR.V2-23 Specifications: Model No SC10LR.V2-23 Brand: Sealey Nett Weight: 13kg Ram Capacity: 7257kg Ram Diameter: 33.93mm Ram Travel: 495mm Pump Type: Single Speed Ram Pin Hole Diameter: 16.5mm Clevis Pin Hole Diameter: 16.7mm Mounting Point Distance (Min): 620mm Overall Length (Min): 655mm Base Mount Type: Double Clevis

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.Tested and Certified to BS EN 13157Additional Information:Safe Working Load: 3000kgTest Load: 4500kgLift Height: 3mHook Aperture: 46mmHoist Weight: 25kg

Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: Ø117mm. • Fits saddle Ø112-117mm. • Model No. JP18 Specifications: Model No JP18 Brand: Sealey Nett Weight: 0.235kg Jack Pad Size: Ø117mm Style: Type B Profile Depth: 18mm To Fit Saddle Size: Ø112-117mm Weight: 0.235kg

Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Features & Benefits: • Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. • Model No. PT1000 Specifications: Model No PT1000 Brand: Sealey Nett Weight: 12kg Capacity: 1000kg Test Load: 1500kg Track Width Adjustable Range: 64-140mm Minimum Curve Radius: 1000mm A: 255mm B: 127.5…

Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling. Supplied with wall mounting fasteners. Suitable for Sealey and other brands of axle stands. Features & Benefits: • Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. • Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling. • Suitable for Sealey axle stands like the VS2002, VS2003 and AS3 ranges as well as most other brands of axle stand. • Supplied with wall mounting fasteners. • Model No. SR23 Specifications: Model No SR23 Brand: Sealey Net…

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

Lifts and stabilizes any dual swing arm motorbike quickly and easily. Fitted with width and angle adjustable rubber support pads. Rubber supports mounted on heavy-duty box section for continuous professional use. Bobbin Supports available as an optional extra - Model No. RPS1BS. Delivered in knock-down form to reduce freight costs, some self-assembly required. Min./Max. Width: 220-350mm. Features & Benefits: • Lifts and stabilizes any dual swing arm motorbike quickly and easily. • Fitted with width and angle adjustable rubber support pads. • Rubber supports mounted on heavy-duty box section for continuous professional use. • Bobbin Supports available as an optional extra - Model No. RPS1BS.…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…