Car Jacks

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are so more→fter than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 2 metre

• IDEAL FOR 4x4 VEHICLES - Clever device which quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials.• EASY-TO-USE - Simply remove the existing trolley jack sa more→ddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor (30mm spigot pin) and you are ready to lift.• SIZE - Minimum/Maximum Height: 140/230mm.• SUITABLE FOR - Jacks with a 31-33mm saddle spigot pin, including Model No's 3000CXD and 3010CX.*Note: Remove any rubber jack pad from the saddle before using to improve safety.Quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one en more→d (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type B. Profile Depth 7.7mm. Size ø91.5mm. Fits saddle ø90-95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.7mm. • Size: ø91.5mm. • Fits saddle ø90-95mm. • Model No. JP12Technical Specification:Nett Weight: 0.055kgJack Pad Size: ø91.5mmStyle: Type BProfile Depth: 7.7mmTo Fit Saddle Size: ø90-95mmWeight: 0.055kgDimensions: Length: 10mm x Height: 190mmWeight: 0.06KgWarranty: Consumable

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxe more→s and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length o…

• Manufactured from durable polypropylene.• Suitable for professional or serious DIY applications.Manufactured from durable polypropylene. Suitable for professional or serious DIY applications.• 3tonn more→e Capacity per pair. • Manufactured from durable polypropylene. • Suitable for professional or serious DIY applications. • Overall Dimensions (L x W x H): 900 x 300 x 215mm. • Maximum Tyre Width: 260mm. • Model No. CAR3000CTechnical Specification:Capacity Pair: 3000kgMaximum Tyre Width: 260mmNett Weight: 0.00kgOverall Dimensions (L x W x H): 900 x 300 x 215mmRamp Height: 160mmDimensions: Length: 330mm x Height: 315mmWeight: 9.76KgWarranty: 1 year

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of lim more→ited clearance. High quality welded chain with safety latches on the load hooks.

• Optional fork cradle support for front paddock stands.• Designed to cradle and lift the front forks of a motorcycle for cleaning and storage.• Yellow phosphate finish for added corrosion resistance. more→• For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.• Optional fork cradle support for front paddock stands. • …

Accepts a wide variety of engines and transmissions. The heads swivel 360 for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability.