Car Jacks

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle 100-106mm.

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Fitted with innovative 180° turning handle to allow you to jack the car up even in tight spaces. Profiled lifting arm allows low clearance height of just 100mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading. Features & Benefits: • Min./Max. Saddle Height: 100/350mm, allowing low entry. • Chassis Length: 490mm. • Heavy-duty chassis with strengthening flanges along the top edge fo…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 1m x 90mm, 3 Tonne

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 5 metre

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling. Supplied with wall mounting fasteners. Suitable for Sealey axle stands AS6, AS5000, AAS5000 and VS2006 ranges as well as most other brands of axle stand. Features & Benefits: • Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. • Suitable for Sealey axle stands AS6, AS5000, AAS5000 and VS2006 ranges as well as most other brands of axle stand. • Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling. • Supplied with wall mounting fasteners. • Model…

Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground clearance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cmFeatures & Benefits• Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped on …

Heavy-duty trailer jack with swivel mounting. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting. Features & Benefits: • Heavy-duty trailer jack with swivel mounting. • Suitable for handling trailers with heavy nose weight. • Integral swivel mounting. • Min./Max. Height: 230/480mm. • Model No. TB373 Specifications: Model No TB373 Brand: Sealey Capacity: 900kg Maximum Height: 480mm Minimum Height: 230mm Nett Weight: 4.62kg

Scissor Jack / Max Load 1.5 t / 2.5 kg

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Height 8.3mm. Size Ø99.5mm. Fits saddle Ø99-103mm. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Height: 8.3mm. • Size: Ø99.5mm. • Fits saddle Ø99-103mm. • Model No. JP16 Specifications: Model No JP16 Brand: Sealey Nett Weight: 0.075kg Jack Pad Size: Ø99.5mm Style: Type B Profile Depth: 8.3mm To Fit Saddle Size: Ø99-103mm Weight: 0.075kg

A pair of extensions for use on car ramps stock No.s 23216 and 23302.