Power Saws

Faithfull Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a 8% cobalt content for increased heat and wear resisitance for greater product life. Will cut thin and thick guage materials. Ideal for use on a wide variety of materials including: stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Specification Cutting Depth: 38mmDiameter: 152mmAdditional Information:• Size: 152mm• Material: Bi-Metal

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

The CorePlus Diamond Holesaw provides professional, fast, clean cutting on a wide range of materials, from hard porcelain tile and stone to cement board and fibreglass. Leading-edge vacuum brazing technology ensures the diamonds stay bonded for extremely long life. Minimal water cooling is required when cutting hard tile, stone and glass. Use fully dry on other materials. Fluid, snag-free cutting, no secondary finishing required. The ultra-thin kerf generates a low amount of torque for faster cutting and extended battery life. Use with an arbor on a cordless drill or with an adaptor nut on an angle grinder.1 x CorePlus DMPHS57 Diamond Holesaw 57mm.Additional Information:• Size: 57mm• …

The CorePlus Diamond Holesaw provides professional, fast, clean cutting on a wide range of materials, from hard porcelain tile and stone to cement board and fibreglass. Leading-edge vacuum brazing technology ensures the diamonds stay bonded for extremely long life. Minimal water cooling is required when cutting hard tile, stone and glass. Use fully dry on other materials. Fluid, snag-free cutting, no secondary finishing required. The ultra-thin kerf generates a low amount of torque for faster cutting and extended battery life. Use with an arbor on a cordless drill or with an adaptor nut on an angle grinder.1 x CorePlus DMPHS64 Diamond Holesaw 64mm.Additional Information:• Size: 64mm• …

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Specifications • Size Range: 6mm – 25mmø (RCM060 – RCM250) • Cutting Depths: 6.4mm up to 20mmø / 12.7mm over 20mmø • Max. Tensile Strength: < 900N/mm² • Ideal For: Sheet Metal, Pipes & PlasticsFeatures & Benefits• Rotabroach Mini Cutters cut clean, burr-free holes in seconds. • The professional solution for cutting holes in sheet metal, pipes and plastics. • Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time. • Over 3 times faster than standard twist drills making them highly economical. • Low power consumption giving a long life to cordless drills.…

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Specifications • Size Range: 6mm – 25mmø (RCM060 – RCM250) • Cutting Depths: 6.4mm up to 20mmø / 12.7mm over 20mmø • Max. Tensile Strength: < 900N/mm² • Ideal For: Sheet Metal, Pipes & PlasticsFeatures & Benefits• Rotabroach Mini Cutters cut clean, burr-free holes in seconds. • The professional solution for cutting holes in sheet metal, pipes and plastics. • Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time. • Over 3 times faster than standard twist drills making them highly economical. • Low power consumption giving a long life to cordless drills.…

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

Bim Progressor Hole Saw Offers 2x Longer Lifetime Than PredecessorFeatures:- Redesigned With Bi-Metal With 8% Cobalt Alloy For Increased Durability- Enhanced Progressive Tooth Strip Enables Faster Cuts- For Use With The Bosch Power Change Plus Keyless Arbor: Offering Accuracy And Robustness.- Suitable For Multipurpose UseSpecifications:- Diameter Mm: 121- Diameter Inches: 4 3/4- Working Length Mm: 44Materials: - Softwood- Drywall- Metal Pipes And Profiles- Non-Ferrous Metals- Plastics

• HSS Air saw blades suitable for Sealey and other leading makes of air saw.• Supplied in a pack of 15.HSS Air saw blades suitable for Sealey and other leading makes of air saw. Supplied in a pack of 15.Technical Specification:Application(s): SA345Blade Pitch: 18tpiNett Weight: 0.06kgPack Qty: 15Dimensions: Length: 5mm x Height: 188mmWeight: 0.044KgWarranty: Consumable

• HSS Air saw blades suitable for Sealey and other leading makes of air saw.• Supplied in a pack of 15.HSS Air saw blades suitable for Sealey and other leading makes of air saw. Supplied in a pack of 15.Technical Specification:Application(s): SA345Blade Pitch: 24tpiNett Weight: 0.06kgPack Qty: 15Dimensions: Length: 3mm x Height: 190mmWeight: 0.045KgWarranty: Consumable

• HSS Air saw blades suitable for Sealey and other leading makes of air saw.• Supplied in a pack of 15.HSS Air saw blades suitable for Sealey and other leading makes of air saw. Supplied in a pack of 15.Technical Specification:Application(s): SA345Blade Pitch: 32tpiNett Weight: 0.66kgPack Qty: 15Dimensions: Length: 10mm x Height: 190mmWeight: 0.045KgWarranty: Consumable

• HSS Air saw blades suitable for Sealey and other leading makes of air saw.• Contents: 18tpi Saw Blades (x5), 24tpi Saw Blades (x5), 32tpi Saw Blades (x5).• Supplied in a pack of 15.HSS Air saw blades suitable for Sealey and other leading makes of air saw. Contents: 18tpi Saw Blades (x5), 24tpi Saw Blades (x5), 32tpi Saw Blades (x5). Supplied in a pack of 15.Technical Specification:Application(s): SA345Blade Pitch: 18tpi (x5), 24tpi (x5), 32tpi (x5)Nett Weight: 0.06kgPack Qty: 15Dimensions: Length: 3mm x Height: 190mmWeight: 0.044KgWarranty: Consumable