Power Saws

The CorePlus Diamond Holesaw provides professional, fast, clean cutting on a wide range of materials, from hard porcelain tile and stone to cement board and fibreglass. Leading-edge vacuum brazing technology ensures the diamonds stay bonded for extremely long life. Minimal water cooling is required when cutting hard tile, stone and glass. Use fully dry on other materials. Fluid, snag-free cutting, no secondary finishing required. The ultra-thin kerf generates a low amount of torque for faster cutting and extended battery life. Use with an arbor on a cordless drill or with an adaptor nut on an angle grinder.1 x CorePlus DMPHS83 Diamond Holesaw 83mm.Additional Information:• Size: 83mm• …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

This Sirius hole saw set comprises six of the most common sizes required for electrical work, along with arbors, pilot drills and a plastic carry case.Features & Benefits• Designed to provide electricians with six of the most commonly needed hole saw sizes • Two arbors and pilot drills • Angled slots help when removing material from hole saws • Padded storage case • Latches keep lid securely closed during transport • Transparent lid for quick identification of contents before starting or leaving a jobContents• 20mm Hole Saw • 25mm Hole Saw • 32mm Hole Saw • 38mm Hole Saw • 51mm Hole Saw • 64mm Hole Saw • Arbor & Pilot Drill Bit …

• HSS Air saw blades suitable for Model No. SA346.• Supplied in a pack of 15.HSS Air saw blades suitable for Model No. SA346. Supplied in a pack of 15.Technical Specification:Application(s): SA346Blade Pitch: 18tpiNett Weight: 0.12kgPack Qty: 15Dimensions: Length: 10mm x Height: 230mmWeight: 0.125KgWarranty: Consumable

• HSS Air saw blades suitable for Model No. SA346.• Supplied in a pack of 15.HSS Air saw blades suitable for Model No. SA346. Supplied in a pack of 15.Technical Specification:Application(s): SA346Blade Pitch: 24tpiNett Weight: 0.12kgPack Qty: 15Dimensions: Length: 10mm x Height: 230mmWeight: 0.124KgWarranty: Consumable

• HSS Air saw blades suitable for Model No. SA346.• Supplied in a pack of 15.HSS Air saw blades suitable for Model No. SA346. Supplied in a pack of 15.Technical Specification:Application(s): SA346Blade Pitch: 32tpiNett Weight: 0.12kgPack Qty: 15Dimensions: Length: 20mm x Height: 232mmWeight: 0.126KgWarranty: Consumable

• HSS Air saw blades suitable for Model No. SA346.• Contents: 18tpi Saw Blades (x5), 24tpi Saw Blades (x5), 32tpi Saw Blades (x5).• Supplied in a pack of 15.HSS Air saw blades suitable for Model No. SA346. Contents: 18tpi Saw Blades (x5), 24tpi Saw Blades (x5), 32tpi Saw Blades (x5). Supplied in a pack of 15.Technical Specification:Application(s): SA346Blade Pitch: 18tpi (x5), 24tpi (x5), 32tpi (x5)Nett Weight: 0.12kgPack Qty: 15Dimensions: Length: 5mm x Height: 235mmWeight: 0.124KgWarranty: Consumable

Bahco Sandflex® Variable Pitch Holesaw made for high precision cutting of holes from 14mm to 152mm diameter in all sawable materials up to 29mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength. All saws have varipitch (4-6tpi) blades. Supplied in cardboard box.Size: 121 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.…

The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic materials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. It is suitable for use with corded and cordless drill drivers. • Cuts Through the Hardest Tiles • Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles • D…

The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic materials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. It is suitable for use with corded and cordless drill drivers. • Cuts Through the Hardest Tiles • Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles • D…

Lasts up to 50x longer than a BiMetal hole saw in tough materialsCutting holes in sheets of steel is not like other hole saw applications. In industrial settings, or when working on vehicles, you have to be extremely precise – but at the same time the material is hard and destroys traditional BiMetal hole saws. The Expert Sheet Metal solves all these issues in one compact piece of high quality engineering.The Expert Sheet Metal is made from a single cylinder of turned metal for ultimate stability, robustness and accuracy. Extreme durability and the ability to cut the hardest grades of steel comes from its carbide teeth, which are individually sharpened and brazed onto the body.This hole saw pa…

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

It is suitable for use with all corded and cordless drill drivers. The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. BIM Progressor Hole Saw offers 2x longer lifetime than predecessor • 2x Longer Lifetime Than Predecessor • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt alloy for increased durability • Enhanced …

Faithfull Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a 8% cobalt content for increased heat and wear resisitance for greater product life. Will cut thin and thick guage materials. Ideal for use on a wide variety of materials including: stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Specification Cutting Depth: 38mmDiameter: 168mmAdditional Information:• Size: 168mm• Material: Bi-Metal