Jigsaw Blades

The Starlock ACZ 70 RT5 blade guarantees extra-fine cuts for routing grout and abrasive. Its extremely thin blade with a 1.6 mm cutting width creates precise fine cuts. The extra-slender cutting edge is coated with a high-quality fine grit 50 for distinctively thin cuts. This accessory offers perfect results when routing extra-thin grout joints between tiles, or even grooves in porous concrete and soft brick for the laying of concealed cables and pipes. It can also cut precise recesses in difficult abrasive materials such as cement-bonded fibre boards and epoxy/glass fibre-reinforced plastic. It is suitable for use with all Starlock, Starlock Plus and Starlock Max power tools as well as common …

Lasts up to 50x longer than a Bi-Metal bladeWhen hardened screws rust or otherwise get stuck, cutting them off perfectly flat to the surface is the only option. The Expert MetalMax makes a perfect flush cut even in hardened metal and, with its outstanding longevity, is the perfect accessory for the tradesman wanting to cut tough materials with a multitool.The Expert MetalMax is at the very cutting edge of Bosch Carbide Technology. Not only are its teeth made from a strip of extremely hard metal that can cut even stainless steel, it also boasts a high-tech extra coating for maximum longevity. The flat edge is optimised for cut-offs as it is less prone to skidding on screws or pipes.You’ve seen th…

Package dimensions (L x W x H): 95.0 x 195.0 x 37.0 mm
Package Weight: 180g
Number of packs: 1
Country of origin: Germany

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

Lasts up to 50x longer than a Bi-Metal bladeWhether you work on buildings or vehicles, a multitool blade that makes a great cut in any material can make working life a lot easier. Integrating all of Bosch’s most advanced manufacturing techniques, the Expert MultiMax brings unrivalled versatility to your multitool.This top-of-the-range multitool blade boasts the very latest in Bosch Carbide Technology: its strip of ultra-hard teeth use Bosch’s unique Curved-Tec design, so it is the first blade to manage chatter-free plunge cuts in sheet metal. Additionally, the latest incarnation of the Expert MultiMax boasts extra coating on its carbide teeth for even greater longevity.Bosch Curved-Tec blades beca…

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

Expert Metalmax For Long Life Cutting Hard Metal:- When hardened screws rust or otherwise get stuck, cutting them off perfectly flat to the surface is the only option. The EXPERT MetalMax makes a perfect flush cut even in hardened metal and, with its outstanding longevity, is the perfect accessory for the tradesman wanting to cut tough materials with a multitool.- You've seen the multitool's astonishing ability to cut into and through wood with ease: with the Bosch EXPERT MetalMax Blade for Multitool metal gets the same treatment. It even cuts hardened window screws and rebar with ease.Features:- Long Life Cutting Hard Metal- Extreme durability is built in with Bosch Carbide Technology- Extra …

High wear and heat resistant teeth made from HSS-Steel (High Speed Steel) offer a long lifetime in non-ferrous (soft) metal and abrasive materials. The Starlock Snap-In mounting system allows fast blade removal and exchange within 3 seconds without having to touch the blade. The mounting system produces the highest power transfer thanks to a 3-dimensional tight-fitting connection between machine and accessory. It is suitable for use with all Starlock, Starlock Plus and Starlock Max power tools as well as common multi-tools.Features:Starlock AIZ 32 APB blade guarantees exact flush and deep plunge cuts in wood, metal and plastics.- Precise cuts due to rounded cutting edge called Curved-Tec- Sturdy …

The Makita TMA053 Plunge Cut Starlock Saw Blade is a popular Starlock multi-tool plunge cut saw blade suitable for cutting wood. Specifications • Diameter: 32x50mm • Material Type: BiM • Application: Wood • Tooth Count: 14 TPI • Pack Quantity: 5 Contents • 5x Makita TMA053 Plunge Cut Starlock Saw Blade

FEATURES:- Operating length: 430 mm- For simple cuts in vertically perforated bricks

Designed to fit both Makita and other manufacturer’s saws, tip embedded, or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and screw embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Features & Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity Specifications • Bore: 30mm • Diameter: 260mm • Kerf: 2.3mm • Rake: 5° • Thickness: 1.8mm • Tooth Count: 64 • Material Type: Wood/Nails • Machine Type: Mitre saw

Designed to fit both Makita and other manufacturer’s saws, tip embedded, or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and screw embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Features & Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity Specifications • Bore: 30mm • Diameter: 305mm • Kerf: 2.3mm • Rake: 5° • Thickness: 1.8mm • Tooth Count: 32 • Material Type: Wood/Nails • Machine Type: Mitre saw

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …