Effects Pedals

500mA, 305 cm cable lenght, 9V DC, switchmode power supply, 2.1/5.5mm connector (inside/outside), power LED, polarity minus inside, weight: 142 g
Voltage: 9V
Polarity: Center Minus
Power Supply: 240V
UK/EU Power supply included: No
ChargerType: Power Supply
Current (mA): 500.0
Number of Outputs: 1
Plug Type: Barrel
Made in: China
Current: 201-500 mA

Vintage-style phase shifter effect pedal for electric guitar that offers an authentic, classic three dimensional phase shifting - from rapid rotary speaker to impressive jet plane effects. It provides dedicated Rate control and separate Color switch for fine-tuning of effects speed and tone, a status LED for effect on/off and battery check and a true hard-wire bypass for ultimate signal integrity. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 142 x 79 x 86 mm. Weight: 380 g.
Type: Phaser;Rotary
Made in: China
UK/EU Power supply included: No

Custom moulded in the UK to fit the contours of the Boss 200 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 200 Series.
Compatible with: Boss 200 Series
Type: Dust Cover
Made in: United Kingdom

Analogue modelling acoustic guitar preamp/stompbox with DI recording output that has been designed to compete head to head with leading products on the market. Its authentic tube/microphone modelling circuitry provides the natural warmth and presence, as if the acoustic guitar was miked through a tube pre-amp. It features the ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezo pickups; dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode; and ground lift switch that eliminates typical ground loop problems. Device has super-high impedance to retain …

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Made in: Vietnam
Type: Pedal Bag
Strap: Shoulder Strap;Yes
Original Colour by Producer: Black;Black
Padding: Yes
Handle: Yes
Waterproof: Yes
Colour: Black

An analog modeling preamplifier and DI box designed for bass. It has a wide range of sound settings, from classic tube to sharp slap and aggressive distortion sound. In addition, it offers direct record output, V-TONE to simulate the sound of well-known vintage amplifiers and other audio options. The device can be used as a direct recording preamplifier with speaker simulation or as an active standard DI box. The effect has a built-in 6.3 mm mono jack input and output, a gold plated XLR connector and a ground lift switch. Powered by 9 V battery or DC adapter (not included).
Type: Preamp;DI Box
Made in: China
UK/EU Power supply included: No
Battery Detail: Al/Mn

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Made in: China
UK/EU Power supply included: No
Current: 701-1000 mA
Power Supply: 240V
Current (mA): 1000.0
Plug Type: Barrel
ChargerType: Power Supply
Polarity: Center Minus
Voltage: 12V
Number of Outputs: 1

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Number of Buttons: 3
Power Supply: Passive
Type: Footswitch
Battery Operation: No
Colour: Black

The Behringer FCV100 V2 Volume and Modulation Pedal is a powerful two-in-one pedal that controls all the dynamics of your playing. Use your foot to alter the volume giving you hands-free control over your level. It also functions as an expression pedal when connected to devices with correct input. With adjustable minimum volume the level of expressiveness is totally up to you; regardless of how you use it though the VCA control ensures reliability and remarkably smooth performance. Expressiveness made easy tailor your dynamics with ease while keeping your hands free.

Mix and match up to 4 TC-Helicon vocal effect pedals together conveniently, simply and with less cable clutter than ever before with this essential audio and power accessory kit-ideal for VoiceTone Singles. With the included 12-volt power supply and DC interconnect cables, there are many different options for connecting your TC-Helicon effects. The power supply in the Singles Connect kit is more than powerful enough to power one of our large multi-FX units and a VoiceTone Single pedal at the same time.
Colour: Black
Made in: China
~ Length: 0 m

Digital stereo reverb effects pedal for electric guitar that is comparable to state-of-the-art studio processors and delivers 24-bit high-resolution stereo reverbs including Spring, Plate, Hall, Gate, Room and Modulate. It features dedicated Mode, Time, Tone and Level controls for awesome sound shaping, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Type: Reverb
UK/EU Power supply included: No
Battery Detail: Al/Mn
Made in: China
Power Supply: Adapter
Battery Operation: Yes…

Digital multi-effects pedal comparable to state-of-the-art studio processors that features 24-bit/40 kHz high-resolution stereo effects including Chorus, Flanger, Phaser, Delay, Tremolo and Pitch Shifter. It also provides dedicated Level control plus 2 additional parameter controls for adjustment of delay time, flanger rate etc., a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Battery Operation: Yes
UK/EU Power supply included: No
Made in: China
Battery …

Passive footswitch pedal that allows plugging a single guitar into two amplifiers or plugging two guitars into a single amplifier, making it easy and convenient to create a rig with eminent flexibility and a variety of tone options. “A or B” and “A and B” switching options allow for greater versatility, while true hardwire bypass in the off position lets players retain their natural tone without interference or signal loss. Pedal features a durable metal chassis and switches that withstand onstage wear and tear, and LED illumination (requires 9 V battery or power source). Dimensions: 127 x 83 x 51 mm.
Made in: China
Number of Buttons: 2

NU-X Sculpture is a mini compressor pedal with professional performance. Sustain and level controls adjust the compression and output, whilst blend gives the ability to add back in some of the unaffected signal to give a more natural attack. Hold down the on/off pedal to switch between soft clip and clean compression modes. Perfect for long sustain chords and clean lead tones. Features: Adjustable sustain and level Blend control to feed in some natural attack Selectable soft clip and clean modes Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Controls: …

This well-built, real-feel pedal comes with a non-slip rubber plate — essential when performing on hardwood or slip-prone surfaces — and an extended cable (2.2 m) for stacked multi-keyboard setups. It is compatible with half-damper capable keyboards, and it can also serve as a standard pedal switch (for sustain, etc).
Polarity Switch: No
Made in: Malaysia
Colour: Black
Compatible with: Universal
Original Colour by Producer: Black;Black
Type-A Connector: TRS 6,3 mm Jack
Type: Sustain Pedal;Half Damper
Cable Length: 2,2 m

Keep your Pedal Baby safe. Stylish and perfect for life on-the-road. The Orange Pedal Baby Gigbag is designed specifically for the Orange Pedal Baby 100. It has a tough vinyl exterior with a padded interior to keep your pride and joy safe and secure. An ideal gift or accessory for any Pedal Baby 100 owner.And with a separate space inside you can also carry around any small pedal and your cables in one official Orange Gigbag. Its even more compact than a laptop bag. You can also travel to and from gigs or recording with comfort and ease thanks to a attached shoulder strap. Give your Pedal Baby 100 the care and love that it deserves - do it with Orange.

The Eden Astroflange Bass Flanger Pedal is a bass-optimised flanger with detailed controls so you can craft your ultimate flanged tones. Specially designed for bass the dynamic response of this versatile pedal has been tailored for bass frequencies to deliver low-end shimmer. Sporting a simple yet adaptable four-knob layout its quick and easy to dial in a range of fantastic flanged sounds. The intuitive nature of these controls allows you to really dive into fine-tuning however. Velocity is your standard speed/rate control while Altitude adjusts the predominant frequencies affected by the flanging effect. The Low Cut offers even more depth by setting how much low-end is affected by the modulation.…

Simple sustain plastic pedal, suitable for all keyboards with standard sustain polarity. Cable length: 160cm.
Type: Sustain Pedal
Original Colour by Producer: Black;Black
Colour: Black
Cable Length: 1,6 m
Polarity Switch: No
Type-A Connector: Jack MONO 6,3 mm Male
Made in: China

The perfect power supply for your DL4 Delay Modeler. The Line 6 DC-DL4 Power Adapter provides your DL4 Delay Modeler pedal with factory power for worry-free performance. The DC-DL4 supplies 12 volts DC from a wall outlet, allowing you to save on batteries when playing at home, in the studio or on stage.
ChargerType: Power Supply
Polarity: Center Minus
Type: Adapter
Number of Outputs: 1
Made in: China
Current: 1 A
Colour: Black
Plug Type: Barrel
Voltage: 12V

Switcher and signal splitter. A/B or A&B to Y mode switch, on/off footswitch, status LED (A: red, B: blue, Y: pink), 3 in-/outputs A/B/Y, 6,3 mm mono jack, optional AC adapter 9V DC (center minus plug), can be used w/o power supply (LED stays off), metal housing, dimensions (D x W x H): 93,5 mm x 42 mm x 52 mm, weight: 160 g
Power Supply: Adapter;9V
Made in: China
UK/EU Power supply included: No

Reissue series drive pedal for guitar or bass. The XTC OD simulates the red channel of a highly regarded boutique tube amplifier, which produces a thick and harmonically rich distortion effect for classic rock styles. All analog circuitry ensures a pure signal path and a "T" tone control enables adjustment of high frequency content as required. A full range of classic rock tones on tap from a single pedal.. Features: Pure analogue amplifier simulation True bypass hardware switching Volume, Gain & Tone controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: V (volume), G (gain), T (tone) & foot switch Input impedance: 1M Ohms …

Genuine Tube-like sound that makes it more than your average Screamer pedal! If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. Using a FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. A FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clar…

As far as versatile and ubiquitous effects go, an overdrive emulating a pushed tube amp is number one. El Mocambo will fatten up your tone with some extra girth around the waist, giving you that highly sought-after mid-range "oomph" that cuts through the mix when your band is pushing decibels. This particular gritty mid-range honk gives the guitar a certain vocal quality that is ideal for a singing blues solo but also works formidably in a hard rock setting as a lead boost on top of an already overdriven sound. El Mocambo Overdrive features a distinct mid-range boost when engaged. This can help warm up a tone that's a bit too jangly to cut through a loud rhythm section and also gives a certain …

Forcefield Compressor is here to give you all the vintage squish and squash you could ever want at a price that simply can't be ignored. From subtle sustain enhancements to smooth signal leveling and all the way to full-on chicken-picking compression, you'll find it all and more in this great road-ready pedal. Compression is always one of the hardest effects to explain due to its subtle nature. You often feel compression more than you hear it, and it just makes it easier and more fun to play when it's on. Forcefield Compressor's vintage circuit design instantly instills that feeling in you, and whether you're going for some sweet tube-like sag or an unapologetic squash, you're sure to find it …