United Kingdom

Car Jacks

 prices on 691 model  
£200
clear
Save List
Show
Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.Tested and Certified to BS EN 13157Additional Information:Safe Working Load: 3000kgTest Load: 4500kgLift Height: 3mHook Aperture: 46mmHoist Weight: 25kg
from £157.95 up to £188.37 
Compare prices and buy Draper Chain Hoist/Chain Block 3 Tonne CH3000C
£158.00
£158.00
£188.00
Compare prices3
Trolley Jack / Max Load 2 t / Hubhöhe 305 mm
£61.99
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
Note: Image is for illustrative purposes only and may differ from the actual product
£179.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Seal repair kit for 2 and 3 Tonne hydraulic trolley jacks. Features and Benefits Provides quick and easy seal repair Can greatly extend the working life of hydraulic trolley jacks
£9.39
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…
from £14.95
Compare prices and buy Sealey Duplex Lifting Strap Reinforced Sling 3m 1000kg LS1003
£15.00
£15.00
Compare prices2
Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Geared block trolleys make it easier to move heavy loads along the gantry by using chain rather than manual handling. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Features & Benefits: • Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Geared block trolleys make it easier to move heavy loads along the gantry by using chain rather than manual handling. • Incorporates wheel guards to prevent contact with other tr…
from £183.95
Compare prices and buy Sealey RSJ Geared Beam Trolley 1 Tonne PT1000G
£184.00
£184.00
Compare prices2
Fitment: Fits various Domestic USA, Japanese, and European Vehicles Color : Black Description This Universal Jack Pad Adapter fits most Japanese and domestic made cars. This product is used to protect the undercarriage metal jack point railing that is on most vehicles. Highly durable and resistant to damage, it will keep the chassis rails from getting pinched, bent, and broken. Polyurethane is soft enough to not harm your vehicle's metal yet rigid enough to support it. Great for DIY vehicle maintenance or taking one with you in the car as some tire shops do not use these pads, and unfortunately bend your pinch/scrape off paint on the welds. This can eventually lead to rust, save yourself …
£7.38
Joom.com
Delivery: in United Kingdom
Report
Buy!
Joom.com
Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes. N.B. Never use brake fluid to top up a hydraulic unit.
£129.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 14.5mm. Size Ø95mm. Fits saddle Ø95-97mm. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 14.5mm. • Size: Ø95mm. • Fits saddle Ø95-97mm. • Model No. JP14 Specifications: Model No JP14 Brand: Sealey Nett Weight: 0.15kg Jack Pad Size: Ø95mm Style: Type B Profile Depth: 14.5mm To Fit Saddle Size: Ø95-97mm Weight: 0.15kg
£8.95
Tooled-up.com
Delivery: to United Kingdom
Report
Buy!
Tooled-up.com
Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length of chain.
from £126.95 up to £149.99 
Compare prices and buy Sealey Engine Support Beam 300kg
£127.00
£127.00
£148.00
£150.00
Compare prices4
GREY support trestles, 1 pair, max. load 14 t, 1+ pairs. Supplied = assembled. Max. load = 14 t. Lifting range with lifting head = 242 - 400 mm. Lift = 158 mm. Weight = 13 kg. Weight per item = 6.5 kg. Product type = uprights. For supporting vehicles or heavy machinery. Robust design with wide and stable contact surface. Safe and easy handling. Perfectly suited for supporting and securing heavy loads. High quality workmanship with a long service life.
£178.80
KaiserKraft.co.uk
Delivery: to United Kingdom
Report
Buy!
KaiserKraft.co.uk
Replacement Front Wheel to Suit ZT1120454X (Sgl) by Kennedy
£7.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
VEVOR Hydraulic Motorcycle Lift Table 350 LBS Dirt Bike Scissor Jack StandReliable Hydraulic OperationSafety PinLockable Universal CastersLarge Lifting RangeHigh SecurityNon-slip Wide DeckPlatform Size: 16.3×13.8inch/415×350 mm,Item Model Number: ZX0901-7B,Net Weight : 65.5 lbs/29.7 kg,Max. Capacity: 350 lbs/158 kg,Lifting Range: 13.8-36 inch/350-905 mm,Product Size: 18.7×15.6×13.8 inch/475×395×350 mm
£147.99
Vevor.co.uk
Delivery: to United Kingdom
Report
Buy!
Vevor.co.uk
Replacement hydraulic ram for SC10LR.V3 engine crane. Replacement hydraulic ram for SC10LR.V3 engine crane.
from £123.95 up to £132.99 
Compare prices and buy Sealey Hydraulic Ram for SC10LR.V3 - SC10LR-V3-18
£124.00
£133.00
Compare prices2
Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…
from £54.95
Compare prices and buy Sealey Lifting Strap 3m 5 Tonne LS5003
£55.00
£55.00
Compare prices2
Protective Rubber Pad for trolley jack 1pcs designed for BMW models Jack Pad Size: 71 x 25mm Made of high quality rubber, will not damage the vehicle. Intended for BMW | Suitable for most floor jacks and lifts This is a high-quality HEYNER German product
£14.99
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Trolley Jack / Max Load 2 t / Hubhöhe 505 mm / Unterfahrhöhe 75 mm / 32.5 kg / Cushions / Lifting Positions 6
£169.95
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
Bottle jack, with hydraulic unit, max. load 3 t, 4+ items. Supplied = assembled. Max. load = 3 t. Lifting range with lifting head = 168 - 318 mm. Lift = 100 mm. Weight = 2.3 kg. Overall height from - to = 168 - 318 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle
£69.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
The WINNTEC® from SIP 20 TON Bottle Jack is perfect for pushing and pressing in a range of garages and workshops, with increased versatility achieved through full horizontal and vertical operation and rugged performance via a range of heavy-duty components. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 244mm to 449mm lifting height range 60mm screw extension for improved versatility Heavy-duty wide cast iron base spreads weight Designed for horizontal and vertical operation WINNTEC® from SIP 3-Year Warranty
£95.99
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 3 metre
from £23.95
Compare prices and buy Sirius Round Lifting Strap Reinforced Sling 3m 2000kg LS500-0206
£24.00
£24.00
Compare prices2
Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000. Features & Benefits: • Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each/800kg per Pair. • Model No. CAR2001 Specifications: Model No CAR2001 Brand: Sealey Capacity Each: 400kg Capacity Pair: 800kg Length: 630mm Maximum Width: 195mm Nett Weight: 6.16kg
from £47.95 up to £59.19 
Compare prices and buy Sealey Car Ramps Pair Extension for Low Ground Clearance Cars CAR2001
£48.00
£59.00
Compare prices2
The Sip 20 Ton Bottle Jack Offers Powerful Adjustable Lifting Up To 470Mm Via A Serrated Saddle For Secure Contact And 60Mm Screw Extension Plus A Heavy-Duty Cast Iron Build With Safety Valve. • 20 Ton Maximum Weight Capacity • 242Mm To 470Mm Adjustable Lifting Range • 60Mm Screw Extension For Added Versatility • Serrated Saddle For Safe Secure Load Contact • Compact And Lightweight Design Despite The Heavy-Duty Cast Iron Construction And Base • Overload Protection And Safety Valve • Ideal For Workshops And GaragesPTDSIP03660
£68.72
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 4m x 60mm, 2 Tonne
from £18.95
Compare prices and buy Draper Duplex Lifting Strap Reinforced Sling 60mm 4m 2 Tonne
£19.00
£19.00
Compare prices2
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height