Drill Bits

• Model No. HSS7Technical Specification:Size: ø7 x 105mmDimensions: Length: 15mm x Height: 210mmWeight: 0.028KgWarranty: Consumable

• Model No. HSS7.5Technical Specification:Size: ø7.5 x 105mmDimensions: Length: 15mm x Height: 210mmWeight: 0.03KgWarranty: Consumable

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135° split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5µ Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is …

• Model No. HSS8.5Technical Specification:Size: ø8.5 x 115mmDimensions: Length: 20mm x Height: 210mmWeight: 0.04KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø5 x 100Weight: 0.013KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø5.5 x 100mmDimensions: Length: 5mm x Height: 190mmWeight: 0.018KgWarranty: Consumable

Concrete Drill Bit 8 mm

• Model No. HSS8Technical Specification:Size: ø8 x 115mmDimensions: Length: 15mm x Height: 210mmWeight: 0.036KgWarranty: Consumable

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø8 x 120mmWeight: 0.037KgWarranty: Consumable

The Irwin HSS Pro TiN drill bits are primarily designed for drilling metal and harder, tougher alloys. Compared to traditional HSS twist drill bits, speed can be increased by 40 -60% and feed by 10 -20% without reducing the life time of the drill bit significantly. TiN is also a poor conductor of heat, so the heat generated during the drilling process is diverted into the chips and coolant and less into the drill bit. These drills have a 135° split point grinding tip which ensures perfect centring and reduced drilling pressure. The drill bit body is manufactured from high quality HSS steel coated with 2.5µ Titanium Nitride (TiN), the TiN coating has a hardness of app. 80 HRC and is …

• Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. • Supplied in a plastic wallet.Ideal for general-purpose drilling into most masonry materials. For use in a 1/2" chuck with percussion. Supplied in a plastic wallet.Technical Specification:Size: ø7 x 100mmDimensions: Length: 3mm x Height: 182mmWeight: 0.02KgWarranty: Consumable

Premium HSS precision-ground right hand cutting drill bit. For drilling small holes in metal, rapid drilling, long life and excellent concentricity. Manufactured from High Speed Steel to DIN338.

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

• Fully hardened high performance drill bit, for use in wood and wood-like materials.• Hex shank for precise and extra grip.• Supplied in a plastic wallet.Fully hardened high performance drill bit, for use in wood and wood-like materials. Hex shank for precise and extra grip. Supplied in a plastic wallet.Technical Specification:Size: ø14 x 152mmDimensions: Length: 1mm x Height: 235mmWeight: 0.046KgWarranty: Consumable

Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below …

Faithfull extensive range of metric sizes for home user and DIY enthusiasts. These high speed steel (HSS) straight shank drills are suitable for use on both wood and metal and may be used in hand or power drills. Manufactured to meet DIN 338 standard. A cutting lubricant is recommended when using these drills in metal. PLEASE NOTE: These drill bits are priced individually but supplied only in bulk packs. Sizes up to and including 9mm are supplied in 10's. Larger sizes are supplied in 5's.Size.7.00mm.Additional Information:• Tip Diameter (mm): 7• Working Length (mm): 67• Overall Length (mm): 107• Pack Qty.: 1

Expert Quality, a selection of metric - sized high speed straight shank twist drills specifically for drilling holes prior to tapping. one drill per card (sizes 4.2 - 10.2mm) and two drills per card (sizes 1.6 - 3.3mm). Manufactured to DIN338 and ISO235/1 Specifications Features and Benefits • Expert Quality • High speed straight shank twist drills specifically for holes prior to tapping • For use with standard ISO metric threads Contents 1 x 5.0mm HSS Twist Drill for 6 x 1.0 Taps

• Model No. HSS9.5Technical Specification:Size: ø9.5 x 125mmDimensions: Length: 15mm x Height: 210mmWeight: 0.05KgWarranty: Consumable

Faithfull Metric jobber drills that are ideal for DIY and professional use in hand and power drills. Robust design gives less breakage, easier hole start and improved penetration. For drilling steel, iron and most metals. Manufactured to meet DIN 338 standard.Size. 2.50 mm Dia. Pack of 2Additional Information:• Tip Diameter (mm): 2.5• Working Length (mm): 30• Overall Length (mm): 57• Pack Qty.: 2

These Faithfull Professional Cobalt Jobber Drill Bits are manufactured from M35 HSSE grade steel with a 5% cobalt content for increased heat resistance and cutting performance. All bits are fully ground and feature a 135° non-slip split point for precise centring and are produced in accordance to DIN 388 for high precision tolerances and geometric accuracy. Cobalt bits cut faster and last longer and are suitable for heavy-duty industrial work in: Alloy steels, carbon steels, cast iron, hardened alloy steels, stainless steels, high temperature alloys, Titanium alloy, high strength steel and carbon fibre composite materials.These Faithfull Professional Cobalt Jobber Drill Bits are supplied …

Ideal for clean accurate drilling in metal, laminates, plastics and wood. Straight shank HSS jobber drill bit

Milwaukee Contractor series SDS Plus drill bit. Specifications • Shank: SDS Plus • Diameter: 7mm • Length: 160mm

Bosch 2608577163 HSS PointTeQ Twist Drill Bit 4.5mm The Bosch 2608577163 drill bit is suitable for fast drilling in metal thanks to its PointTeQ tip design. The self-centring tip prevents wandering, making quick and easy drilling starts possible. Increased drilling rate generates less heat and wear keeping the tips sharper for longer and ensuring continuous durability. Features:
- Self-centring tip
- Made from high-speed steel for long life
- PointTeQ tip design allows for fast drilling in metal Specification:
- Pack Qty: 1
- Size: 4.5mm

The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless …