Drill Bits Silverline

Spear-headed tungsten carbide-tipped For clean, accurate holes in ceramic tiles, glass and mirrors Low drill pressure and frequent lubrication optimises results ¼" Hex shank

For use with electric drills. To mix paint, plaster, cement slurries and textured coatings. Requires 10mm or larger chuck. Max 600rpm. Perfect for mixing paint, adhesives, mortar, cement and most other liquid materials Can be used with a power drill Painted steel construction Overall Length: 600mm

For Dowels Precision ground, pre-cutting blades for a cleaner cut Adjustable depth collars for accurate drilling of dowel holes For timbers and man-made woods Black oxide, dry rust resistant coating Sizes: 6mm, 8mm & 10mm

For use with electric drills. To mix paint, plaster, cement slurries and textured coatings. Requires 10mm or larger chuck. Max 600rpm. Perfect for mixing paint, adhesives, mortar, cement and most other liquid materials Can be used with a power drill Painted steel construction Overall Length: 600mm

Milled and ground HCS steel drill bits Coated for increased corrosion resistance Drills clearance holes and countersink in one operation 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm and 6mm, Hex Key & Wooden Key

Heavy Duty Steel Body Core Drills With Diamond Dust Cutting Segments. Ideal For Dry Cutting Clean Holes In Masonry. Use With 1/2 Bsp Compatible Arbors And Drills Equipped With A Safety Clutch. Do Not Use With Drills Set In Hammer Action.PTDTST427544"

4 Piece kitchen fitters routers bits suitable for use on kitchen worktops, softwoods, hardwoods, MDF, plywood and chipboard. Ideal set for kitchen fitters TCT cutting edges and strong, hardened steel shanks Supplied in a wooden storage case Contents: ½" Shank Straight Cutters: 1 x 63 x 12.7mm, 2 x 50 x 12.7mm, ¼" Shank Flush Cutter 25.4 x 12.7mm

Tungsten carbide tips Contents: Straight: 6 x 20mm, 12 x 20mm, 16 x 20mm, 90° Grooving: 12.7mm, Dovetail: 12.7mm, 45° Chamfer: 32mm, Bearing flush trim: 12.7 x 13mm, Rounding over:22.2mm, 28.6mm, Cove box: 12.70mm, D22.2mm, Roman ogee: 25.5mm

Tungsten carbide tips Contents: Straight: 6 x 20mm, 12 x 20mm, 16 x 20mm, 90° Grooving: 12.7mm, Dovetail: 12.7mm, 45° Chamfer: 32mm, Bearing flush trim: 12.7 x 13mm, Rounding over:22.2mm, 28.6mm, Cove box: 12.70mm, D22.2mm, Roman ogee: 25.5mm

For use with most variable speed, drills to cut holes from 40mm – 200mm diameter. Ideal for installing downlights. Transparent cowl to retain flying debris whilst drilling, useful when drilling into the ceiling Two cutters for wood, plastic, plasterboard, aluminium, brass and acrylic sheets Cutter arm has diameter graduations at 5mm intervals Maximum Drilling Speed: 500 rpm Max Cutting Depth: 32mm Max Cutting Diameter: 40mm - 200mm Hex Key, 2x TCT-Tipped Blades, 2x Carbon Steel Blades, Lip and Spur Bit, and TCT-Tipped Masonry Drill