Effects Pedals

As the proud owner of an FX 300 effects pedal, you want it to last for as long as possible. The matching padded bag will protect it from getting scratched during the day-to-day touring use. This bag does so much more though: its water-resistant 1680D nylon protects your FX 300 from splashing water during transport, and there is an extra compartment for the power supply unit so that you always have it by your side and neatly tucked away. You can also easily carry cables or other accessories in the large inside pocket. Have fun and enjoy using the FX 300 for a long time!
Water Resistance: Yes
Handle: Yes
Zip: Yes
Padding: Yes;8 mm
Type: Bag
Compatible with: LD Systems FX 300
Material: Nylon
Interior …

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Compatible with: Boss 500 Series
Type: Dust Cover
Made in: United Kingdom

The TC PowerPlug 9 gives you 9 volts of TC approved power for use with your TC Electronic pedals including TonePrint PolyTune Ditto Loopers and analog drive pedals.

The Behringer PSU-HSB-ALL Power Adapter is designed for use with a wide variety of 9-volt devices including over 20 effects pedals at a time and keyboards. The adapter is supplied with 4 x assorted jumper cables and 2 x daisy-chain cables with 5 x connectors. With a transformerless design the PSU-HSB-ALL eliminates the 50/60-cycle hum and noise. The Behringer PSU-HSB-ALL features a 2-pin Euro plug and is designed for use with 220V - 240V sockets.

The Behringer UV300 Ultra Vibrato Pedal delivers vintage-inspired vibrato echoing the influence of the 60s and 70s. The vibrato pedal offers three separate settings to operate as well with unlatch bypass and latch which offer different opportunities for tonal creation. This tonal exploration doesnt stop there with dedicated Depth Rate Rise and Mode controls you can adjust every parameter of your sound to achieve your ideal setting. Utilising an active LED you can easily check the status of the pedal at any moment.

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

The Behringer UT300 Ultra Tremolo Pedal offers up the vintage tremolo effects present in 50s and 60s amplifiers. Compact lightweight and easily transportable this handy stompbox fits excellently into your setup providing equally impressive tones. The tone can be sculpted with impeccable ease thanks to three dedicated controls including a Rate Wave and Depth allowing the creation of a multitude of unique sounds that infuse your performance with impeccable depth. Powered through a 9-volt battery you can easily check the status of your pedal with an on/off LED.

Distortion effect pedal for guitar that features ultrahigh gain circuitry and produces huge guitar tone which used to be available only from highgain amps with endless sustain – sound like hard rock/heavy metal distortion of the 80’s. Effect provides dedicated Distortion, Low, High and Level controls, status LED for effect on/off and battery check and topquality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Operation: Yes
Type: Equalizer;Distortion
UK/EU Power supply included: No
Power Supply: Adapter
Made in: China

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a firstclass electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
UK/EU Power supply included: No
Power Supply: Adapter
Type: Chorus
Battery Operation: Yes
Made in: China

9V/660mA power adapter with negative centre that has been primarily designed for Strymon effect pedals.
Current: 501-700 mA
Power Supply: 240V
Current (mA): 700.0
Polarity: Center Minus
Voltage: 9V
UK/EU Power supply included: No
Plug Type: Barrel
Number of Outputs: 1
ChargerType: AC adapter
Made in: China

Overdrive effect pedal for guitars that features original 4558 op amps and MA150 distortion diodes, and delivers the classic, authentic vintage vacuum tube-like sound. It provides dedicated Drive, Tone and Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Type: Overdrive
Made in: China
Battery Operation: Yes
UK/EU Power supply included: No

The discounted set with accessories is put together in such a way that all the products form a perfect harmony. Buying the set also saves you money, as it is cheaper than the products individually. The main picture showing the set is for illustrative purposes.
Net Weight (kg): 9.4
Power: 2000 W
Type: Active;2 Bandwidth
Tweeter: 1,4"
Height (cm): 43.6
Package Contents: Manual;Power Cable
Frequency Range: 52 Hz - 20 kHz
Sound Pressure Level - SPL (dB): 130.0
Inputs: Kombi XLR/Jack
Width (cm): 25.6
Controls: Bluetooth;Input Volume
Woofer: 8"
Power Supply: 100V - 240V
Package Quantity (pcs): 1
Crossover Frequency: 2 kHz
Sound Pressure Level (SPL): 130 dB
Colour: Black
Speakers: 1x 8 | 1x 1 "
Made …

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Voltage: 9V
Current (mA): 1300.0
Polarity: Center Minus
Plug Type: Barrel
Made in: China
Type: Power Supply

Distortion effect pedal for electric guitar that pushes distortion to the extreme by producing crushing, bottomheavy distortion for modern metal and hard rock. It features gain boost circuitry that delivers superthick and heavy distortion with lowend punch and endless sustain, dedicated Gain Boost, Distortion, Tone, Bottom and Level controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and firstclass electronic on/off switch for highest signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Type: Boost;Distortion
UK/EU …

3-mode octaver effect pedal for electric bass guitar that allows for creating a monster sound by adding 2 additional tones using the guitar—1 and 2 octaves below the original tone. Pedal provides dedicated volume controls for all 3 tone types for awesome sound shaping, a flexible 3-mode Range switch that allows ultimate bass performance, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Power Supply: Adapter
Battery Operation: Yes
UK/EU Power supply included: No
Type: Octaver
Made in…

The discounted set with accessories is put together in such a way that all the products form a perfect harmony. Buying the set also saves you money, as it is cheaper than the products individually. The main picture showing the set is for illustrative purposes.
Connectivity: GPS;Bluetooth
Variant: EU+BALKANS
Made in: Slovakia

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Made in: Vietnam
Size: L
Material: Aluminium
Variant: Large
Colour: Black

A distortion effect pedal. It has dense, tube-like distortion sound with an endless sustain. Its ideal for extreme hard rock or heavy metal sounds. The sound is adjusted using Distortion, Level potentiometers and a 3-band equalizer. In addition, it is equipped with a blue status LED, foot switch and ¼'' In/Out connectors. The effect is powered by a 9 V battery or adapter (not included).
UK/EU Power supply included: No
Type: Distortion;Overdrive
Battery Operation: Yes
Made in: China

The power supply 1 SPOT you can use anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either. the 1 SPOT is one of the quietest power sources. It is the 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.
Variant: 1 SPOT
Voltage: 9V
Current (mA): 1700.0
Type: Adapter
Made in: China
Colour: Black
Power Supply: Adapter;9V
Current: 1700 mA
Polarity: Center Minus
Plug Type: Barrel
ChargerType: AC adapter
Connector Angle: Straight…

Compression/sustain effect pedal for guitar that compress loud and boost low signals without degrading the original sound. Effect provides dedicated Level, Tone, Attack and Sustain controls, blue status LED for effect on/off and battery check and topquality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Type: Compressor;Sustainer
UK/EU Power supply included: No
Power Supply: Adapter
Battery Operation: Yes
Made in: China

The TC PowerPlug 12 gives you 12 volts of TC approved power for use with your TC Electronic Nova pedals and DC powered devices from TC-Helicon as well.

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Made in: Vietnam
Padding: Yes
Colour: Black
Type: Pedal Bag
Waterproof: Yes
Strap: Yes;Shoulder Strap
Original Colour by Producer: Black
Handle: Yes

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Made in: United Kingdom
Type: Dust Cover
Compatible with: Headrush Mx5