United Kingdom

Car Jacks

 prices on 998 models  
Show
Min./Max. Working Height: 1225/1850mm. Capacity: 4tonne per stand. Steel stand. Pin and chain load support. Full width crutch. Designed to support part of a vehicle that is being used on a lift where more→free access is required. Stands also help prevent the tipping/rocking of the vehicle. These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs. Model No. ASH4000
27.29Buy!
£
Demon-tweeks.com
Delivery: in United Kingdom
Report
These two Rubber Wheel Chocks ensure that vehicles will not move when being jacked up or parked on an incline.4 Ton Capacity ChocksDimensions (H x L x W): 150 x 195 x 100mmWeight Each: 2.0kg 10 Ton Ca more→pacity ChocksDimensions (H x L x W): 175 x 270 x 115mmWeight Each: 2.9kg Model No:WC01Dimensions (H x L x W):150 x 195 x 100mmWeight Each:2.2kgModel No:WC02Dimensions (H x L x W):175 x 270 x 115mmWeight Each:3.3kg
Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controlled low more→ering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See table for detailed specification. Features & Benefits: • Max. Height (inc. extn.): 472mm @ 15tonne, 393mm @ 30tonne. • Air Consumption: 10.5cfm. • Spring loaded dead man's control. • Handle locks in position at three different angles. • Lifts heavy plant, tractors and commercial vehicles. • Extensions: 45, 75mm. • Model No. YAJ15-30
23.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base tha more→t provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …
Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They c more→an also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …
2,274.00Buy!
£
KaiserKraft.co.uk
Delivery: to United Kingdom
Report
Loading support for semi-trailers, max. load 25 t, contact surface LxW 500 x 200 mm. Supplied = assembled. Max. load = 25 t. Contact surface = 500x200 mm. Adjustment range = 1000 - 1300 mm. Product ty more→pe = uprights. High max. load due to steel construction. Chassis provides easy, fast positioning. Ball bearing base plate. The new Trailer Jack has greatly advanced the safety of semi-trailers and containers when being loaded and unloaded. The telescope loading prevents uncoupled trailers from tipping while being loaded by pallet trucks or due to load changes. This is positioned like a leg below the front edge or the suspension area of semi-trailers or containers.
43.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Scan Engine Mini 1d 3.3 V Decoded Class 2 Note: Image is for illustrative purposes only and may differ from the actual product
• 78-510mm lifting range • Single piston pump for a fast lift, reaching full height in just 2.5 strokes • Low profile design • Integrated rubber saddle pad prevents damage to underside of vehicle • EV more→A foam handle prevents panel damage • Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors • Safety valve prevents the jack from overloadingThis trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrat…
61.99Buy!
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Trolley Jack / Max Load 2 t / Hubhöhe 305 mm
• Suitable for supporting large multi-cylinder engines (maximum weight 75kg).• The supports can rotate for accessibility to all parts of the engine.• Width, height and length adjustable.• Capacity: 75 more→kg.Suitable for supporting large multi-cylinder engines (maximum weight 75kg). Features fully adjustable mounting arms and swivel castors. Supports can rotate for accessibility to all parts of the engine.• Suitable for supporting large multi-cylinder engines (maximum weight 75kg). • The supports can swivel for accessibility to all parts of the engine. • Width, height and length adjustable. • Capacity: 75kg. • Model No. MES02Technical Specification:Capacity: 75kgEngine Support Span: 130-370mmHeight: M…
449.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
2 Bellows Hand Held Air Jack
Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pump more→ing the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…
186.30Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
Foot pedal for easy hands-free operation Spring-loaded lowering mechanism Four steel castors for manoeuvrability Fitted with overload safety valve Capacity 500kg Draper 12 months parts and labour warranty
47.98Buy!
£
MachineMart.co.uk
Delivery: to United Kingdom
Report
This professional quality bottle jack has a high quality polished steel ram with additional screw in/out height adjuster.
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height