Car Jacks

A pair of extensions for use on car ramps stock No.s 23216 and 23302.

• DESIGNED FOR THE JACKING POINTS - protects and prevents damage to jacking points, side skirts and the underside of the vehicle.• HIGH QUALITY RUBBER - providing a sturdy and durable point of contact.• SECURE FIT TO VEHICLE - moulded to fit bespoke vehicle fitting.Technical SpecificationApplication(s): Mercedes-Benz, W213/S213/C238/A238 (2016 on), GLK-Class X204 (2008 - 2015), GLE, GLS C167/V167/X167 (2018-on), CLS C257 (2017 on), W205/A205/S205 (2013-on), S-Class W222/V222/X222/C217/A217 (2013-on), M-Class, GL-Class, GLS W166/X166 (2011-on), GLE Coupe C292 (2015 -2019), GLC C253/X253 (2015-on), AMG GT X290 (2018-on)Nett Weight: 0.56kg

Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground clearance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cmFeatures & Benefits• Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped on …

• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 1 metre

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Specifications:- Weight: 2,578kg- Ability: 1500kg- Application: Automotive- Plastic weight: 6g

• Made from durable polypropylene.• These ramps are designed to allow jacking access to suitable jacking points on the vehicle.• Not intended to raise a vehicle enough for under vehicle servicing.Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing.• 3tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LRTechnical Specification:Capa…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 14.5mm. Size ø95mm. Fits saddle ø95-97mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 14.5mm. • Size: ø95mm. • Fits saddle ø95-97mm. • Model No. JP14Technical Specification:Nett Weight: 0.15kgJack Pad Size: ø95mmStyle: Type BProfile Depth: 14.5mmTo Fit Saddle Size: ø95-97mmWeight: 0.15kgDimensions: Length: 20mm x Height: 190mmWeight: 0.15KgWarranty: Consumable

The Draper Wheel Dollies are expert equality, each fitted with four heavy duty white non-marking castors. The robust steel manufacture enables up to 454kg weight to be carried on each dolly. They are designed to locate underneath vehicle wheels allowing precise and easy movement within confined spaces. Specifications 2 x Draper Expert Wheel Dollies  Max. Weight: 454kg per Dollie Material: Steel  4 x heavy duty castors Non-marking castors Dimensions 600 x 360 x 100mm Colour: Blue