Car Jacks

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 3 tonne x 2 metre

• Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys.• Overall Size: ø630mm x 760mm.Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys.• Water-resistant wheel cover to suit Model No's STR004 and STR005 storage trolleys. • Overall Size: ø630mm x 760mm. • Model No. STR.CTechnical Specification:Nett Weight: 0.00kgSize: ø630mm x 760mmDimensions: Length: 209mm x Height: 34mmWeight: 0.164KgWarranty: 1 year

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Height 6.5mm. Size ø94mm. Fits saddle ø93-96mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Height: 6.5mm. • Size: ø94mm. • Fits saddle ø93-96mm. • Model No. JP17Technical Specification:Nett Weight: 0.050kgJack Pad Size: ø94mmStyle: Type BProfile Depth: 6.5mmTo Fit Saddle Size: ø93-96mmWeight: 0.050kgDimensions: Length: 20mm x Height: 165mmWeight: 0.052KgWarranty: Consumable

• Approved to EU and UK Lifting Gear Regulations.• This hoist is intended for use where a suitable support facility exists.• Support brackets are included with the equipment.• N.B. Support bar is not included.Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.• Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 250kg. • N.B. Support bar is not included. • Model No. PH250Technical Specification:Capaci…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth of 19mm. Size ø148mm. Fits saddle ø128-131mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: ø148mm. • Fits saddle ø128-131mm. • Model No. JP04Technical Specification:Nett Weight: 0.29kgJack Pad Size: ø148mmStyle: Type AProfile Depth: 19mmTo Fit Saddle Size: ø128-131mmWeight: 0.29kgDimensions: Length: 20mm x Height: 280mmWeight: 0.3KgWarranty: Consumable

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max. Load: 2 Tonne.Width: 60mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 2000kg• Breaking Strength: 14000kg

• Lifts and stabilizes any dual swing arm motorbike quickly and easily.• Fitted with width and angle adjustable rubber support pads.• Rubber supports mounted on heavy-duty box section for continuous professional use.• Bobbin Supports available as an optional extra - Model No. RPS1BS.• Delivered in knock-down form to reduce freight costs, some self-assembly required.• Min./Max. Width: 220-350mm.Technical SpecificationNett Weight: 4.3kgMinimum/Maximum Width: 220-350mmTechnical Specification:Minimum Width: 220mm Maximum Width: 350mmDimensions: Length: 110mm x Height: 470mmWeight: 4.8KgWarranty: 1 year

Ratchet type axle stands, with cast iron support posts. Features angled teeth in posts, which prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 395/600mm. • Capacity: 12 Tonne per pair. • Ratchet type with cast iron support post. • Tough steel plate welded base. • Sold in pairs. • Model No. VS2006