Car Jacks

Heavy-duty axle stands to safely support vehicles for extended periods of time. Large crutches for good load distribution. The heavy gauge steel frame and welded construction gives superior strength and safety. All stands feature captive, multi-position pin load support. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 369/571mm. • Capacity: 12 Tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • Range available in five different colours. • Sold in pairs. • 3 Year Guarantee*. • Model No. AS6 Specifications: Model No AS6 Brand: Premier Capacity Each: 6 Tonne Capacity Pair: 12 Tonne Maximum Working Height: 571mm Minimum Working Height: 369mm Nett Weigh…

This engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with two chains. Contents: 2 x Chains Specifications: Capacity: 500kg Min. width: 730mm Max. width: 1,480mm Adjustable screw height: 0-205mm Overall beam length: 1,500mm Chain quantity: 2 Weight: 17kg

Replacement hydraulic ram for SPC1000 engine crane. Features & Benefits: • Replacement hydraulic ram for SPC1000 engine crane. • Model No. SPC1000.28 Specifications: Model No SPC1000.28 Brand: Sealey Nett Weight: 13kg Ram Capacity: 5000kg Ram Diameter: 31.92mm Ram Travel: 585mm Pump Type: Twin Speed Ram Pin Hole Diameter: 18.0mm Clevis Pin Hole Diameter: 27.5mm* Mounting Point Distance (Min.): 706mm** Overall Length (Min): 763mm Base Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centre

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 1+A1 Contents: 1 x Load Sling Wide, 5m x 50mm, 1 Tonne

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle 100-106mm.

Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. Features & Benefits: • A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600TR and ADT3 - Maximum capacity is 500kg. • Model No. ADT3 Specifications: Model No ADT3 Brand: Sealey Capacity: 500kg Compatibility: 300TR, 300TRQ, 600TR, 600TRQ Nett Weight: 10.82kg

Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle. Features & Benefits: • Min./Max. Height: 145/360mm. • Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. • Made in the EU and fitted with safety overload valve. • One-piece steel base, reservoir and pump cylinder design gives added strength. • Supplied with zinc coated handle. • 3 Year Guarantee*. • Model No. PTBJ2 Specifications: Model No PTBJ2 Brand: Premier Capacity: 2 Tonne Hydrau…

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 2m x 150mm, 5 Tonne

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Height 8.3mm. Size Ø99.5mm. Fits saddle Ø99-103mm. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Height: 8.3mm. • Size: Ø99.5mm. • Fits saddle Ø99-103mm. • Model No. JP16 Specifications: Model No JP16 Brand: Sealey Nett Weight: 0.075kg Jack Pad Size: Ø99.5mm Style: Type B Profile Depth: 8.3mm To Fit Saddle Size: Ø99-103mm Weight: 0.075kg