Car Jacks

• Compact automotive wheel chocks for use during emergency wheel change.• To be used on a flat surface only.• Fold flat for easy storage in glove box or door pocket.Compact automotive wheel chocks for more→use during emergency wheel change. To be used on a flat surface only. Fold flat for easy storage in glove box or door pocket.• Compact automotive wheel chocks for use during emergency wheel change. • To be used on a flat surface only. • Fold flat for easy storage in glove box or door pocket. • Folded (W x D x H): 83 x 167 x 28mm (x2). Open: 83 x 167 x 133mm (x2). • Model No. WCF01Technical Specification:Applications: Suitable for cars only, below 2tonne, only on level surface, service purposesDimensio…

Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap. Manufactured from 100% high strength pol more→yester with reinforced lifting eyes. Colour-coded according to European standards for identifying capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capacity: 1000kg • …

BMW trolley jack rubber pad, designed to avert damage to the underside of a BMW when using a trolley jack, thus assisting in the prevention of rust on the underside of the vehicle's chassis. Made from more→durable and robust rubber. The rectangular locating rubber enables the pad to be secured within the unique BMW jacking port. For use with standard chassis trolley jacks with a saddle diameter of over 70mm.

• All steel stand with pin and chain load support and full width crutches for safe support of load.• Designed to support part of a vehicle that is being used on a lift where free access is required. • more→Stands also help prevent the tipping/rocking of the vehicle.• Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs.All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle.Note: These stands should not be used to support a vehicle on their…

• Replacement hydraulic ram for SPC2000 engine crane.Replacement hydraulic ram for SPC2000 engine crane.• Replacement hydraulic ram for SPC2000 engine crane. • Model No. SPC2000.28Technical Specificat more→ion:Nett Weight: 17.5kgRam Capacity: 8000kgRam Diameter: 37.89mmRam Travel: 624mmPump Type: Twin SpeedRam Pin Hole Diameter: 22.0mmClevis Pin Hole Diameter: 27.5mm*Mounting Point Distance (Min.): 797mm**Overall Length (Min.): 855mmBase Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centreDimensions: Length: 150mm x Height: 860mmWeight: 18KgWarranty: Consumable

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of lim more→ited clearance. High quality welded chain with safety latches on the load hooks.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are so more→fter than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 1 metre

• Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles.• Enables easy movement around workshop or bodyshop.• Adjustable frame allows you to change the length and more→width as required.• Three types of height-adjustable and interchangeable supports, rubber support pads, shallow and deep crutches.• Fitted with four ø200mm nylon locking castors.Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. Enables easy movement around workshop or bodyshop. Adjustable frame allows you to change the length and width as required. Three types of height-adjustable and interchangeable supports, rubber support pads, shallow and deep c…

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other more→trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

• Adjustable outer extension clamps with rubber feet • Designed to position the engine when replacing the engine mounts. Also suitable for aiding the removal of transmission components and gearboxes • more→Compatible with most cars and light commercial vehicles • Supplied with two chainsThis engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with two chains. 2 x ChainsTechnical SpecificationAdjustable screw height: 0-205mm Capacity…