Car Jacks

• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

• Replacement hydraulic ram for PH30 engine crane.Replacement hydraulic ram for PH30 engine crane.• Replacement hydraulic ram for PH30 engine crane. • Model No. PH30.01Technical Specification:Nett Weight: 14.7kgRam Capacity: 1200kgRam Diameter: 38.05mmRam Travel: 494mmPump Type: Single SpeedRam Pin Hole Diameter: 22.2mmClevis Pin Hole Diameter: 21.4mmMounting Point Distance (Min): 650mmOverall Length (Min): 690mmBase mount Type: Double ClevisDimensions: Length: 180mm x Height: 140mmWeight: 15.8KgWarranty: Consumable

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 6.4mm. Size ø106.5mm. Fits saddle ø99-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 6.4mm. • Size: ø106.5mm. • Fits saddle ø99-106mm. • Model No. JP02Technical Specification:Nett Weight: 0.06kgJack Pad Size: ø106.5mmStyle: Type BProfile Depth: 6.4mmTo Fit Saddle Size: ø99-106mmWeight: 0.06kgDimensions: Length: 10mm x Height: 190mmWeight: 0.07KgWarranty: Consumable

• This engine stand accepts a wide variety of engines and transmissions.• The head swivels 360º for accessibility to all parts of the engine.• Fully adjustable mounting arms.• Swivel castors provide excellent manoeuvrability.• Maximum Load Length: 700mm.Accepts a wide variety of engines and transmissions. The heads swivel 360° for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability. Maximum Load Length: 700mm.• Accepts wide variety of engines and transmissions. • Head swivels through 360°. • Swivel castors. • Fully adjustable mounting arms. • Model No. ES450Technical Specification:Capacity: 450kgNett Weight: 19.…

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 2 metre

• Fitted with overload valve.• Base and reservoir machine welded for increased strength and reduced chance of leakage.• Threaded pump assembly allows for easy disassembly and maintenance.• Supplied with 4-piece operating handle.• Service kits readily available.Fitted with overload valve. Base and reservoir machine welded for increased strength and reduced chance of leakage. Threaded pump assembly allows for easy disassembly and maintenance. Supplied with 4-piece operating handle. Fitted with carrying handle. Service kit readily available.• Min./Max. Height: 128/223mm. • Telescopic 2-stage ram for higher maximum lift. • Compact closed height. • Cast base with threaded components. • Supplied with 4…

• Fitted with heat treated and ground, triple-spur geared shaft and pinion.• Also includes mechanical load brake for extra safety.• All chains are manufactured from hardened alloy material and load hooks feature safety latches.• Compact gear housing allows use where headroom is limited.Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allows use where headroom is limited.• Fitted with heat treated and ground, triple-spur geared shaft and pinion. • Includes mechanical load brake for extra safety. • Al…