United Kingdom

Car Jacks

 prices on 710 models  
£200
clear
Save List
Show
• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º.• Chocks supplied on rope for easy storage and removal from underneath wheels.Rubber wheel chocks weighing 8kg (4kg each) prevent vehicle movement when jacking or parking on an incline. Suitable for heavy commercial vehicles and light aircraft. Chocks supplied on rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 12º.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º. • Suitable for light aircraft, or vehicles below 30tonne. • Choc…
from £105.95 up to £121.13 
Compare prices and buy Sealey Heavy-Duty Rubber Wheel Chocks - Pair
£106.00
£106.00
£116.00
£121.00
Compare prices4
Car Scissor Jack / Lift Jack With Ratchet For easy use Quick Car Lift Jack| Car Jack available Sizes: 1 ton, 1.5 ton & 2 tons. Suitable for car lift in home or garage Floor Car jack Suitable for Car, Van, SUV Car scissor jack with ratchet is a lightweight and compact tool suitable for emergency and breakdown- easy to store in a car's trunk or under a seat Portable Lift Jack is designed for safely lift a car for maintenance or tire changes Necessary tool for car lifting and tyre change Speed ratchet - to enable you to make the lifting process easy and quick Quality Car Lift Scissor Jack for all type of cars Brand: alca Germany
£42.99
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
from £11.95 up to £13.59 
Compare prices and buy Draper Wide Load Sling, 2m x 60mm, 2 Tonne
£12.00
£12.00
£14.00
Compare prices3
High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …
£49.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.15 Tonne Bottle Jack• Min./Max. Height: 231/441mm.• Fitted with overload valve.• Base and reservoir machine welded.• Supplied with 2-piece handle.• 3 Year guarantee*.• Model No. PBJ15SModel No: PBJ15S:Brand: Viking:Capacity: 15 Tonne:Hydraulic Lift: 150mm:Maximum Height: 441mm:Minimum Height: 231mm:Nett Weight: 7.15kg:Screw Extension: 60mm:PTDSEAPBJ15S
£90.55
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Chassis Stand / Max Load 3 t / 5.2 kg
£89.53
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 31.4mm. Size ø140mm. Fits Saddle ø139-140mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 31.4mm. • Size: ø140mm. • Fits saddle ø139-140mm. • Model No. JP03Technical Specification:Nett Weight: 0.32kgJack Pad Size: ø140mmStyle: Type CProfile Depth: 31.4mmTo Fit Saddle Size: ø139-140mmWeight: 0.32kgDimensions: Length: 141mm x Height: 32mmWeight: 0.306KgWarranty: Consumable
from £8.28 up to £8.95 
Compare prices and buy Sealey Safety Rubber Jack Pad - Type C V1
£8.00
£8.00
£9.00
Compare prices3
Lightweight jack stands are used to support your vehicle after lifting with a jack. Wide pyramid base provides extra strength and stable support Made of high quality forged steel with a welded frame design for durability, suitable for a variety of vehicles including small cars, SUVs and light trucks Height adjusts from 11" to 16.5" with a 3 ton load capacity Multi-position ratchet has a sawtooth design that allows for quick height adjustment Features a large saddle area for better contact with the load to be supported. tested for reliability and safety to meet ASME standards
£48.63
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
• EXTRA SAFETY - Provides extra safety when locating awkward jacking point.• SUITABLE FOR - Ideal for front wheel drive vehicles. Suitable for jacks with a 31-33mm saddle spigot pin.Provides extra safety when locating awkward jacking point. Ideal for front wheel drive vehicles. Suitable for jacks with a 31-33mm saddle spigot pin.• Provides extra safety when locating awkward jacking point. • Ideal for front wheel drive vehicles. Suitable for jacks with a 31-33mm saddle spigot pin. • Model No. X136Technical Specification:Application(s): 3000CXD, 3010CXMaximum Width: 820mmMinimum Width: 580mmNett Weight: 12.90kgScrew Adjustment: 75mmDimensions: Length: 170mm x Height: 142mmWeight: 12.1KgWarrant…
from £114.95 up to £134.69 
Compare prices and buy Sealey Cross Beam Adaptor 2tonne
£115.00
£130.00
£135.00
Compare prices3
Bottle jack, with hydraulic unit, max. load 12 t, 2+ items. Supplied = assembled. Max. load = 12 t. Lifting range with lifting head = 215 - 400 mm. Lift = 125 mm. Weight = 6.7 kg. Overall height from - to = 215 - 400 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle
£169.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Heavy-duty chassis fitted with a powerful twin piston 'quick-lift' feature. Large saddle aids positioning integrated rubber saddle pad provides added protection to the vehicle. Available separately is a hardwearing Nylon wheel kit designed to prevent damage to showroom and garage floors. Safety valve prevents the jack from overloading. Supplied with a two piece handle and EVA foam bumper to protect vehicle panels.PTDDRPDIR16407
£148.32
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
2.5 Tonne trolley jack suitable for 4 x 4s, light vans and cars. Includes adjustable saddle extension for when extra lifting height is required. Versatile lifting range of 150mm to 440mm without extension and 530mm with extension added, with a quick lift side lever for raising to lifting point with only one pump needed. All steel construction frame and wheels with heavy duty cast iron pump. Built in pump overload prevents over loading for safe operation with hydraulic bypass system to stop ram over travel. Product size: 680 x 290 x 190mm, weight 21.5kg, packaged in colour box.
£119.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load.• Fitted with innovative 180° turning handle to allow you to jack the car up even in tight spaces.• Profiled lifting arm allows low clearance height of just 100mm making this unit suitable for sports and custom cars.• Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension.• White saddle aids positioning under vehicle and safety valve prevents overloading.Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Fitted with innovative 180° turning handle to allow y…
from £81.95 up to £95.71 
Compare prices and buy Sealey 180° Handle Trolley Jack 2 Tonne Low Profile Short Chassis - Red
£82.00
£82.00
£90.00
£96.00
Compare prices4
Pressed steel wheel dolly with four Ø90mm metal castors. Handles tyres with a width up to 355mm. Suitable for use in bodyshops and workshops. Features & Benefits: • Two pressed steel wheel dollies. • Capacity: 454kg/dolly. • Ø90mm Metal castors. • Handles tyres with a width up to 355mm. • Suitable for use in bodyshops, workshops and car parks. • Model No. WS454
from £119.95 up to £150.35 
Compare prices and buy Sealey WS454 2 Piece Wheel Dolly Set
£120.00
£150.00
Compare prices2
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height