Car Jacks

Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle. Features & Benefits: • Optional fork cradle support for front paddock stands. • Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. • Yellow phosphate finish for added corrosion resistance. • For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle. • Model No. FPSFC Specifications: Model No F…

Replacement hydraulic ram for SPC1000 engine crane. Features & Benefits: • Replacement hydraulic ram for SPC1000 engine crane. • Model No. SPC1000.28 Specifications: Model No SPC1000.28 Brand: Sealey Nett Weight: 13kg Ram Capacity: 5000kg Ram Diameter: 31.92mm Ram Travel: 585mm Pump Type: Twin Speed Ram Pin Hole Diameter: 18.0mm Clevis Pin Hole Diameter: 27.5mm* Mounting Point Distance (Min.): 706mm** Overall Length (Min): 763mm Base Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centre

Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. Enables easy movement around bodyshop. The supports are interchangeable between V-crutches and sill clamps. Supports and clamps adjustable for height and overall width. Fitted with four Ø125mm nylon castors, two of which lock. Features & Benefits: • Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. • Enables easy movement around bodyshop. • Supports interchangeable between V-crutches and sill clamps. • Supports and clamps adjustable for height and overall width. • Fitted with four Ø125mm nylon castor wheels, two of which lock. • Model No. RE901 Specification…

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 168/316mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ2S Specifications: Model No PBJ2S Brand: Viking Capacity: 2 Tonne Hydraulic Lift: 100mm Maximum Height: 316mm Minimum Height: 168mm Nett Weight: 2.2kg Screw Extension: 48mm

The Sealey VS0110 Under Vehicle Engine/gearbox Support is ideal when replacing clutches or timing belts The Sealey VS0110 is an under vehicle engine/gearbox support that is fully adjustable, making the unit suitable for most transverse and in-line configurations. Designed to support the engine or gearbox when mountings or gearbox are being removed. This unit removes the need for using a transmission jack or engine support beam. Features:
- Ideal when replacing clutches or timing belts
- Removes the need for using a transmission jack or engine support beam
- Fully adjustable, making the unit suitable for most transverse and in-line configurations
- Designed to support the engine or gearbox …

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.Tested and Certified to BS EN 13157Additional Information:Safe Working Load: 2000kgTest Load: 3000kgLift Height: 3mHook Aperture: 36mmHoist Weight: 16kg

All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle. Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs. Features & Benefits: • Min./Max. Working Height: 1225/1850mm. • Capacity: 4tonne per stand. • Steel stand. • Pin and chain load support. • Full width crutch. • Designed to support part of a vehicle that is being used on a lift where free access is required. • Stands also help prevent the tipping/rocking of the vehicle. • The…

Made primarily for the motor racing enthusiast, this jack weighs in at just 26kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons, bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up. Features & Benefits: • Min./Max. Saddle Height: 95/485mm, allowing low entry. • Chassis Length: 725mm. • Made primarily for the motor racing enthusiast, this jack weighs in at just 26kg. • Utilises many weight saving techniques such as skeletal lift arm…

Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Geared block trolleys make it easier to move heavy loads along the gantry by using chain rather than manual handling. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Features & Benefits: • Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Geared block trolleys make it easier to move heavy loads along the gantry by using chain rather than manual handling. • Incorporates wheel guards to prevent contact with other tr…