Powerline Adapters

AXIS TU8001 Ethernet Surge Protector helps reduce downtime service and maintenance of your system by shielding your PoE devices against transient voltage spikes in the Ethernet cable. It is a compact high-quality product validated to work seamlessly with Axis devices.N/AN/AAXIS TU8001 is perfect to be installed close to a PoE switch located indoors or in an outdoor electrical enclosure cabinet adjacent to a network camera or another device. Placing it in an enclosure you get less exposed wiring simpler troubleshooting of the whole system and less hardware visible on the pole. The product can be easily mounted on a wall or on a DIN rail.N/AN/AWith a network device and a surge protector from Axis …

Allied Telesis GE IEEE 802.3AT P +JECTOR

Logitech PoE Injector with Plug Set

Cisco CP-8832-POE= PoE adapter

Elo Touch Solutions E413396 PoE adapter 1500 V

Cisco AIR-PWRINJ5=. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s, Cabling technology: 10/100/1000Base-T(X). Dimensions (WxDxH): 65 x 165 x 36 mm. Number of products included: 1 pc(s)

Deliver power and data to your Power over Ethernet device using this mountable PoE+ midspanThis Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable at distances of up to 100 m (330 ft.).The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model.Convenience and cost savingsThis versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power so you can easily power and access a high-power …

Extend the range of a PoE connection!

The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Extender Repeater Model 560962 is designed to extend connection distances from a PoE source to an output device another 100 m (328 ft.) via Cat5e or Cat6 cable. You can cover even longer distances by cascading these extenders on a network. The PoE+ extender does not need any additional power supply as it draws the power it needs from the PoE input.

Simple Installation
Simply connect the "PoE In" port with your PoE injector or PoE switch and connect the "PoE Out" with the PoE device that you wish to connect; e.g. a VoIP phone or a PoE network camera. That's it. There is nothing …